This item fits: *2010-2012 Ford Mustang V6 (SEE NOTE) *2010-2012 Ford Mustang GT (All) NOTE: To install on a V6 Model you will need a GT front grille assembly, as well as a dual exhaust system (NEITHER OF THESE ITEMS ARE INCLUDED). Manufactured in High Pressure tough yet flexible polyurethane similar to the factory parts that is Matte White in color. The replacement front bumper cover using all factory attachment points. The left side and right skirts attach directly to the factory rocker panels with small screws in the wheel wells and OE approved 3M double face tape against the body. The rear lower skirt requires removal of the lower section of the factory rear bumper and attaches to the rear bumper with all of the factory locations. The spoiler mounts using 2 of the factory holes and 3M double face tape around the perimeter. If your vehicle is not equipped with a spoiler you will have to drill to mount this spoiler on your vehicle. The louvers attach directly to the 1/4 windows with 3M tape. Ten UV Resistant Urethane domed decals with a printed Diamond Pattern are included to create a grille effect. Front bumper cover and rear lower skirt are pre-drilled, making installation easy by utilizing the original factory bumper attachment points and hardware. The side marker lights are the original lights from the factory front bumper. The Aluminum Mesh grille with unique Mustang Diamond pattern is preinstalled on the Front Bumper Cover. The blackened out area on the Front & Rear Bumper Covers was painted Black on this vehicle. Comes unpainted and professional installation and painting is recommended.