JET 708411 JOVS-10 5-1/2-Inch Oscillating Vertical Spindle Sander 115-Volt 1-Phase

by Jet

Product Description

From the Manufacturer

Includes 2 spindle wrenches and 4-inch dust chute. 1 hp, 115-volt motor. Table is mounted on trunnions. Includes 10 spindles from 1/4- to 4 inches. All have threaded ends for quick changes. Spindle and table inserts are located on a cast-aluminum rack. Main spindle support runs in precision ball bearings and is oscillated by a heavy-duty worm-and-gear mechanism that runs in an oil bath. Sturdy one-piece stand. Push button starter buttons. 39-inch table height helps prevent user fatigue.

FEATURES

• Table is mounted on trunnions system
• 10 spindles from 1/4" to 4" in diameter all have threaded ends for quick changes
• Spindle and table inserts are conveniently located on a steel rack
• Main spindle support runs in precision ball bearings and is oscillated by a heavy-duty worm and gear mechanism
• Worm and gear mechanism runs in an oil bath
• Sturdy one piece steel stand
• Push button starter buttons provide fingertip control
• The motor is located inside the base and is independently mounted for easy service
• 39" table height helps prevent operator fatigue

STANDARD EQUIPMENT

• Complete set of 10 removable spindles 1/4" to 4" diameter
• 1/4" diameter x 5" long steel
• 3/8" diameter x 6" long steel
• 1/2" diameter x 6" long steel
• 5/8" diameter x 6" long steel
• 3/4" diameter x 9" long steel
• 1" diameter x 9" long rubber
• 1-1/2" diameter x 9" long rubber
• 2" diameter x 9" long rubber
• 3" diameter x 9" long rubber
• 4" diameter x 9" long rubber
• Three table insert rings
• Two spindle wrenches
• 4" dust chute

SPECIFICATIONS
Model: JOVS-10
Table Size (in): 24 x 24
Table Tilt (Down): 45 degrees
Spindle Speed (RPM): 1,725
Oscillations (per minute): 75
Length of Oscillations (in): 1-1/2
Motor (TEFC): 1 HP, 1 Ph 115V Only
Net Weight (lbs): 298

Product Description

The JET 1/2 HP Benchtop Oscillating Spindle Sander uses oscillating action to reduce friction to protect wood and prolong sleeve life. Tilts for bevel sanding, too. Style: Benchtop oscillating spindle sander, HP: 1/2, Speed (RPM): 1,725, Table Dimensions W x L (in.): 14 1/2 x 14 1/2, Motor: 1/2 HP induction motor, Motor Phase(s): 1, Motor Voltage: 110, Amps: 3, OPM: 30, Port Size (in.): 2in. dust port keeps dust and debris out of the air, Spindle Speeds (qty.): 1, Bearing Type: Precision ball bearings, Adjustable: Table tilts to 45deg to accommodate bevel sanding projects

Product Details

Product Manual [278kb PDF]

• Shipping Weight: 307 pounds (View shipping rates and policies)
• Shipping: This item can only be shipped to the 48 contiguous states. We regret it cannot be shipped to APO/FPO, Hawaii, Alaska, or Puerto Rico.
• Shipping Advisory: This item must be shipped separately from other items in your order. Additional shipping charges will not apply.
• ASIN: B0000223MU
• California residents: Click here for Proposition 65 warning.
• Item model number: 708411
• Average Customer Review: 4.0 out of 5 stars  See all reviews (12 customer reviews)
• Amazon Best Sellers Rank: #87,640 in Home Improvement (See Top 100 in Home Improvement)
  • #47 in Home Improvement > Power & Hand Tools > Power Tools > Sanders > Disc Sanders

Customer Reviews

Most Helpful Customer Reviews

19 of 19 people found the following review helpful:

3.0 out of 5 stars Solid & Smooth, but some Quality Concerns, July 26, 2004

By 

Robert Strasser (Pulaski, VA United States) - See all my reviews
(REAL NAME)   

This review is from: JET 708411 JOVS-10 5-1/2-Inch Oscillating Vertical Spindle Sander 115-Volt 1-Phase (Tools & Home Improvement)

A two foot square smooth cast iron table top combined with a very smooth spindle makes this machine very easy to work with. I measured the spindle runout to be 0.004 inches maximum for all spindles, except for the 1/4 spindle that was 0.013.

My lower rating of only 3 stars is due to 3 quality issues. The top came with chemical stains, but was smooth and usable. I had to re-wire the switch... minor but should not have been required. And third, the table inserts are not flush with the table top. This can cause a piece of wood to catch as you are sanding with a resulting cup or glitch. Jet is sending me a new set of table inserts, but I have a feeling it is a poorly machined table top. I could easily shim the inserts, but for the price of the machine I expect it to be right and I want JET to know their quality control is slipping.

17 of 17 people found the following review helpful:

5.0 out of 5 stars A big winner, February 13, 2005

By 

Michelle Stone "litebkt" (Mariposa, CA USA) - See all my reviews
(REAL NAME)   

Amazon Verified Purchase

This review is from: JET 708411 JOVS-10 5-1/2-Inch Oscillating Vertical Spindle Sander 115-Volt 1-Phase (Tools & Home Improvement)

I've tried some other bench top spindle sanders and had to move up from a piece of junk that I've been using for the past couple of years.

I wanted a bigger table, smoother action from the sanding spindle, and a smoother surface to work on. Additionally, I wanted a dedicated tool on its own stand. I spend a lot of time at the spindle sander. I wanted a comfortable and rock steady station to work.

After looking at what was available, my choice came down to this unit and one made by Grizzly. After looking very closely at the pictures and manuals offered by both companies, I decided that these were very likely made by the same company in China. There are virtually no differences that can be determined.... except one. The Jet's table is rounded on the corners. I envisioned pemanent bruises on my hips from running into sharp corners of the Grizz.

I own several Jet and Delta tools. I like working with tools that are well finished, that have a surplus of power for the job, that have smooth and flat work surfaces, and look good. I have customers in my shop all the time, so appearances mean a lot.

So, for the looks and rounded top corners, I decided to spend the extra couple hundred for the Jet. I am not dissapointed. The work surface has been machined flat and sanded smooth. It has the nicest surface of any machine in my shop.

The unit came fully assembled. All I had to do was to remove the protective gunk that prevents rust from the table top and install the sleeves on the spindles. The manual is nicely prepared in B&W and has good pictures to illustrate the points being made. The manual is also pleasantly short yet covers all significant details.

The spindle action is smooth and quiet. There is plenty of power to quickly remove material but it is easy to control as well. The result is you'll have exceptional control when removing material. I hooked up my dust collection and with only 650 CFM, it pulls most all the dust very well. I'm very impressed with the operation of the tool. It is truly the nicest OSS that I've used.

The machine comes with a full assortment of different sized spindles of 60 grit paper. I practically never use 60 grit for my projects. I've found that sanding spindles are available from Southern Tool and from Grizzly. I've got some on order for the sizes and grits I use most. It also has a 4 inch spindle. This is great for sanding straight edges or large arcs.

One nit that I have is that there are two shelves for spindle storage, one mounted on each side of the cabinet. The holes in these shelves accomodate the smaller spindles well enough. But the larger spindles have large nuts on the bottom and don't fit in the smaller holes. They keep tipping or even fall out when I move the tool around.

Other than the silly thing with the spindle storage, I feel that this tool is of the highest quality. I am very happy with this purchase and highly recommend the tool for anyone who needs a spindle sander.

14 of 14 people found the following review helpful:

4.0 out of 5 stars A great not-so-little sander!, March 18, 2003

By A Customer

This review is from: JET 708411 JOVS-10 5-1/2-Inch Oscillating Vertical Spindle Sander 115-Volt 1-Phase (Tools & Home Improvement)

This machine is solidly built. It runs smoothly and does a great sanding job on all your curvy things. Despite a warning that it was on backorder and that delivery wouldn't be possible for many weeks, www.Amazon.com confirmed within three days that it had shipped! With the exception of the wooden pallet on which it was shipped (the pallet had been smashed to the point of almost being useless), the sander arrived intact and ready to go. It's heavy, so plan on having some help on hand at your end to assist with the unloading. It's top is ground flat and glassy smooth and provides ample support for any of the projects I'm likely to encounter at home. It's also square to the spindle which is always a plus. There was some spillage of the 90 weight oil from its reservoir during shipping (caused by the unit having been tipped too far, no doubt), and some missing or chipped paint from the backside of the base unit where the access door butts against it. Aside from these minor defects, I'm very pleased with the condition in which it arrived, and very happy with this choice in an oscillating sander. I doubt there's abetter one out there for the $. I've given this purchase only four stars for one reason only: www.Amazon.com does not sell replacement sleeves for this sander. The sleeves are not readily available in any of the local woodworking stores and I haven't figured out yet where I'm going to get them (perhaps the folks at JET can make a recommendation?).