The powerful and reliable JET Oscillating Edge Sander has the accuracy and durability you need in one exceptionally well designed machine. Edge, face, bevel, and contour sanding are at your fingertips, and with the power for big jobs and control for fine work. Style Oscillating belt edge sander, Adjustable Yes, Adjustable outer drum support table enables contour sanding, HP 1 1/2, Table Dimensions W x L in. 7 x 32, Motor Phases 1, Motor Voltage 115 prewired 115V, Port Size in. 4 in. O.D. dust port for increased dust collection efficiency, Fence 24in.L x 4in.H, Material Type Cast iron, metal, Belt Speed ft./min. 3,900 SFPM, Belt Size in. x in. 6in.L x 89in.W, Amps 18/9. Oscillating feature reduces heat build-up on sanding belt to reduce loading and burning which increases belt life Quick-release lever and tracking control dial are conveniently located for replacing and tracking belts Belt platen is made from precision-ground steel plate for strength and durability Graphite covered steel platen runs cooler increasing machine and belt life Cast iron table moves up or down to provide exact workpiece positioning Tilting sanding head for sanding bevels, angles and flat surfaces 51in.L x 26 1/2in.W x 20in.H Table Tilt 90
Wide-ranging features and capabilities make the JET 708447 OES-80CS 6-Inch 1-1/2 HP Oscillating Edge Sander, 115/230-Volt 1-Phase a valuable addition to your home shop. This efficient tool offers the accuracy and durability you need in one exceptionally well-designed package. Edge, face, bevel, and contour sand with the OES-80CS, and enjoy both the power for big jobs and the necessary control for fine work.
The JET OES-80CS 6-Inch
Oscillating Edge Sander offers:
- A 1 1/2 HP, 115/230-volt TEFC motor for reliable performance
- A rubber-coated drum for consistency
- A belt speed of 3900 SFPM (surface feet per minute) for versatility
- Oscillating action that improves efficiency and protects work surfaces
The four-inch dust port connects to your dust collection system, so it's simple to keep your shop clean and safe.
Power Motor for Robust Performance
The OES-80CS is an accurate, durable, and versatile sander. View full diagram.
The contour table makes sanding inside and outside curves easy and accurate.
The idler drum with oscillating action and a reliable belt tensioning mechanism ensure efficient, effective sanding.
The OES-80CS comes equipped with a 1 1/2 HP, 115/230-volt (pre-wired 115-volt) TEFC (totally enclosed fan cooled) motor to deliver plenty of power for efficient and consistent performance. Mounted on the front, a simple, industrial style push-button switch controls the sander and is within easy reach even when you're operating the tool.
Sanding Belt Drive for Versatile Sanding Speed
The motor power is transmitted to the 6 x 89 inch-long abrasive belt via a 4-1/2-inch diameter, rubber-covered aluminum drum. The result is a 3900 SFPM (surface feet per minute) belt speed, optimum for sanding virtually any species of wood with the wide range of grits available. The rubber-coated drum ensures smooth, slip-free transfer of the motor power for highly consistent sanding. At the same time, an equally sized aluminum drum on the other end actually imparts the oscillating motions to the belt while keeping it tracking correctly.
Oscillating Action Prevents Overload and Burning
This sander operates with a 1/2-inch stroke that oscillates 108 times per minute, which utilizes a much larger area of the belt than straight-line belt sanders. The oscillating action also prevents loading of the sandpaper in one area, which has the adverse effect of stretching the life of the sanding belt to its fullest potential. Additionally, oscillation greatly reduces the amount of heat produced, thereby helping to prevent any burning of the work piece or sanding belt.
Quick and Easy Adjustments
A simple lever-operated tension release makes changing the belt fast, easy, and tool free. Even the belt guard can be removed and installed with a pair of large finger-operated knobs. You can also conveniently adjust the top-mounted belt tracking system with the included wrench, and you can take advantage of the motor mount's tracking adjustment should it be necessary.
Cast-Iron Table for Precise Results
The OES-80CS features a cast-iron table measuring 30 x 10 inches front to back that has been precision-ground flat and has a full-length miter slot machined into it. Additionally, the table can be adjusted up and down for precise alignment of the workpiece, and the included miter gauge makes precise end or miter saw sanding much easier.
Dust Collection for a Cleaner Shop
To help keep your workspace clean, the OES-80CS includes a dust port with four-inch diameter that's built into the hinged end of the belt guard. The belt guard system also helps direct the dust towards the port as well as focus the vacuum power of your dust collector on the belt to maximize efficiency.
The OES-80CS is covered by a five-year warranty and includes an all-steel enclosed base cabinet, which offers support and valuable storage space for abrasive belts and related tools or supplies.
About JET: A History of Sharing New, Feature-Rich Products
Opened in 1958 after the founder of the company, Leslie P. Sussman, took the first Boeing Jet Airplane trip from Seattle, Washington to Japan, JET began as a small dealer that sold air hoists and trolleys out of a single hardware store in Seattle. Over the years, JET has carried everything from snowmobiles, transmitter radios, and forklifts to nylon stockings, but by the early 1970s, metalworking had become the base of their business line. And by the 1980s, JET had expanded into the realm of woodworking. Today, you'll find that JET offers a wide range of popular woodworking tools that are backed with best-in-class features and excellent service.
What's in the Box
One front panel with door (stand), one rear panel (stand), two side panels (stand), one shelf, two M5x10 screws, two M5 flat washers two, M5 lock washers, one extension table assembly, one drum guard and dust port, owner's manual, warranty card, one table and motor unit, one miter gauge assembly, one sanding belt, and cabinet hardware.