JSG-6DC 6"x48" Belt Sander and 12" Disc Sander Combo 1-1/2HP 1PH 115/230V The Jet JSG-6DC sander combines a 12" disc and a 6" x 48" belt to provide raw industrial 1.5HP sanding power. The exclusive dual thumbscrew belt tracking adjustment locks to keep the belt on track while tackling any tough application. The sander boasts both a quick release belt tension lever and a quick lock dust cover for the disc. The built in handle allows for easy portability around the workshop. Jet tools is committed to being the tool supplier you can depend on for the epitome of quality, innovation and service. Jet tools has worked hard to make this a reality that has been ongoing since they introduced their products more than 50 years ago. Jet 708599 Features: Industrial-quality construction effectively handles collection of wood chips and sawdust Exclusive dual thumbscrew belt tracking adjustment locks to keep belt on track during use Graphite covered steel platen runs cooler increasing machine and belt life Specially designed belt guard allows full use of the 6" belt width and length Drive drum is rubber-coated for a better grip on the sanding belt resulting in less slippage Tracking adjustment knob with quick-lock handle keeps belt on track during use Quick-release belt tension lever makes belt changes fast and easy Quick-lock dust cover allows fast disc changes Single 4" dust port on the back of the base collects dust effectively from both the belt and disc Powerful 1-1/2HP motor easily handles the toughest sanding operations Built-in handles for easier portability Jet 708599 Specifications: Warranty: 5 year Height: 43" Width: 37.5" Length: 29
From the Manufacturer
This 6-Inch by 48-Inch Belt/12-Inch Disc combination sanding machine is a real workhorse. You can use the belt either horizontally or vertically and can be locked at any angle in between. There are two sanding tables and both have mitre gauge slots and positive stops at 90 and 45 degrees. The belt tracking adjusents have exclusive dual thumb screws and are easy to use. Power is delivered by a 1-1/2 hp 115/230 Volt motor, prewired 115V, that will eat wood all day long. The uint sits on a dust box that has a 4-Inch dust port to hook up to a dust collection system. Belt speed is 2,500 SFPM and Disc speed is 1,725 SFPM. Designed for heavy use. Shown with optional stand.