Frequently Bought Together
What Other Items Do Customers Buy After Viewing This Item?
Product Specifications
| Part Number : | 708636CK |
| Power Source: | corded-electric |
| Item Package Quantity: | 1 |
| Item Dimensions | |
| Weight: | 169 Pounds |
| Length: | 37 inches |
| Width: | 22.50 inches |
| Height: | 18 inches |
Technical Details
- Industrial-quality construction effectively handles collection of wood chips and sawdust
- Quick-install collection bag makes emptying and re-attaching a snap
- Single-stage design for economical and quiet operation
- Industrial controls designed for years of trouble-free use
- Quick-connect collection bags with elastic band for fast, easy installation and removal
Product Description
Amazon.com Product Description
Offering plenty of filtering ability and lots of muscle for your shop, the Jet DC-1100CK dust collector with 2-micron canister (model 708636CK) features a powerful 1.5-horsepower motor and is effective in the collection of wood chips and sawdust, it delivers 1100 CFM (cubic feet per minute) of air flow through its 4-inch hose connection.
|
Jet DC-1100CK dust collector with bag.
Industrial-quality controls, 5-year limited warranty.
Features
The Jet DC-1100CK's totally enclosed, fan-cooled, 1.5-horsepower motor features a finned cast iron heat dissipation case and is permanently lubricated and rated for continuous duty. The maintenance-free motor comes pre-assembled to the blower section and is complemented by a pre-installed industrial-quality switch panel. Its canister can be installed and removed without tools thanks to the large ergonomic knobs that are easy to handle.
The Jet DC-1100CK uses a high-tech canister filter element that catches 99 percent of particles as small as 2 microns in diameter. To help maintain performance, a set of "hands" operated by a large top-mounted handle wipes across the filter element pleats within the canister, freeing built-up dust and sending it to the catch bag below.
The Jet DC-1100CK comes equipped with a quick-install collection bag with elastic band for speedy installation and removal. The all-steel base is equipped with four free-swiveling casters that allow for easy movement in any direction. An optional remote control uses radio frequency for connectivity, avoiding the need to be in line-of-sight to turn the machine on and off. It's backed by a 5-year limited warranty.
Specifications
|
What's in the Box
One Jet 708636CK DC-1100CK dust collector and 2-micron canister kit.
Product Description
The JET Model 1100 dust collector is built with industrial-quality construction, effectively handling collection of wood chips and sawdust. Comes equipped with a quick-install collection bag, single-stage design, 4 casters for portability, and permanently lubricated, fully enclosed, fan-cooled motors. Optional canister filter offers superior dust collection by capturing particles as low as 2 microns. HP: 1 1/2, Volts: 115V (prewired 115V), CFM: 1,100 Air Flow @ 4, Hose Diameter (in.): 4 and 6
Product Details
Would you like to update product info or give feedback on images?
|
Related Items
- Most Popular
- Vacuum Fittings
- Clamps
Customer Reviews
|
Share your thoughts with other customers:
|
||||||||||||||||||||||
|
Most Helpful Customer Reviews
8 of 8 people found the following review helpful:
5.0 out of 5 stars
Exceeds Expectations!,
By
Amazon Verified Purchase(What's this?)
This review is from: JET 708636CK DC-1100CK Dust Collector with Micron Canister (Tools & Home Improvement)
After reading a bunch of reviews, I knew Jet was the way to go. Then, with the help of a book called Dust Collection Basics, I figured out what CFM, FPM and static pressure I would need for my table saw, miter saw, jointer, bandsaw and downdraft table. The answer was on the border between the DC-600 and DC-1100. I was more concerned about the noise than additional price, but was VERY pleased to find out that this machine is MUCH quieter than I anticipated. Of course, I'm used to an over-worked shop-vac (bad bearings) so though it's not exactly silent, it is a great improvement.I built a Thein cyclone (Google it for plans, easy to build and works GREAT!) to place on a 30 gallon galvanized trash can, and to save space, I inverted the blower motor and hung it on the wall right over the cyclone can. Now, within the same footprint, I have a 2 cycle DC setup that's safer and easier to empty, and cost me about $25 more! Then I set up each machine with JDS blast gates - I know me... if the switch is across the shop, I'll skip it for "just one cut..." then wind up with a face full of dust because most cuts are just one! I rationalized upgrading to the 1 micron filter by considering the health problems related to dust inhalation. They go WAY beyond black kleenex and "lung cookies." I figured a couple hundred bucks now, or thousands in hospital bills and medications later. You can decide for yourself. ;o) I will say that I was surprised to find out that, when paired with Rockler's Dust Right master system (giant 4" vacuum wand) it won't pick up screws or even zip-tie cutoffs, but it picks up every speck of dust within 12" of it! If I use a reducer, it'll pick up just about anything with the increase in velocity. If you're reading this, you've alread made the first good decision - get a dust collector. I can't say whether it's the best around, but I'm impressed enough so far to actually sit down and write a review. By the way, if you can't afford a full-fledged system, check out Rockler's cyclone for a 5 gal. pail and combine it with your shop-vac after replacing the filter and using a drywall/fine dust bag. The big chunks go into the cyclone, and the bag only gets filled with the finest of particles so you'll have infrequent changes. BUT - you won't get the volume of air of a DC, so your saws will still spit some dust up.
3 of 3 people found the following review helpful:
4.0 out of 5 stars
Needed a little work with a tap and die set.,
This review is from: JET 708636CK DC-1100CK Dust Collector with Micron Canister (Tools & Home Improvement)
I bought this dust collector to support a "dust free" hardwood floor install and to use later on in a wood shop. There were minor problems in assembling the dust collector. I had to tap one 6mm hole that was missing threads in order to assemble the air intake. I also had to run a 10mm die down the threaded rod on the top of the filter, correcting a taper, in order to get the nuts onto it. This was easy to do as I have the metric tap and die set, but it would pose a problem if you don't. Once assembled, the dust collector works great and is reasonably quiet.
5.0 out of 5 stars
Jet Dust collection system,
Amazon Verified Purchase(What's this?)
This review is from: JET 708636CK DC-1100CK Dust Collector with Micron Canister (Tools & Home Improvement)
When I finally got the dust collection system it was very easy to assemble. It only took maybe 30 minutes to put together. It seems very well made. I've tried to use a 5hp shop vac to do the job but could never get all of the dust that you make doing wood working projects. I will get the 1 micron canister for this system in future. But for now this will do just fine. I did add a 21Ft DustRight hose from Rockler and converted all my machines to the 4" hose fittings. I really wish there was some sort of industry standard for hose attachment fittings. It seems more time consuming to get them all converted then it did putting the dust collector together
Share your thoughts with other customers: Create your own review
|
|
Tags Customers Associate with This Product(What's this?)Click on a tag to find related items, discussions, and people.
|
Customer Discussions
|
This product's forum
Active discussions in related forums
Search Customer Discussions
|
Related forums
|
Listmania!
|
|
