The WARN Winch Wireless Control System allows operating the winch remotely from up to 50-feet away. The system will work with any Warn winch with a 5-wire electrical system. For easy installation, the wireless control system has a receiver equipped with an internal antenna and all other mounting hardware required for installation. The receiver is potted for extreme resistance to water and the elements. The weather-proof transmitter has two large buttons to facilitate easy operation of the winch even while wearing gloves and its two-color LED provides operator feedback. To begin activation, hold down both buttons on the transmitter for five seconds until the two-color LED turns green. This indicates the system has been activated. To begin the winching process, hold down the power-in or power-out buttons, and the LED will turn red, showing that winching is in process. The LED will blink if the battery of the transmitter is low.