This MOMO Steering hub adapter replaces your factory steering wheel, then you can install any MOMO steering wheel to your vehicle. May lose horn or cruise control function. Offroad use or racing use only on the vehicles equipped with airbags. All the instructions and hardware are included with this product. Includes hub adapter, black rubber cover, screw kit, hex key wrench, horn ring, and any horn wires you will need for for vehicle, used for racing and off-road purpose. This hub adapter will fit most 6 lug 2.75" (70mm) aftermarket steering wheels, such as MOMO, Isotta, Sparco, OMP, NRG and many others. MOMO Steering Wheel Hub is able to absorb outstanding impacts thanks to a programmed deformation, thus dramatically increasing the safety level in case of collision. Momo has the largest application catalog in the industry, offering fitments for hundreds of different vehicles. For cars without airbag: Do not attempt to install this kit yourself unless you have been properly trained in the installation and maintenance of car steering wheels. Do not attempt to install this kit without having previously read the instruction manual. Incorrect installation can lead to a steering wheel failure which can cause an accident resulting in serious personal injury or death. For cars with airbag: Every automobile manufactured in the United States must be equipped with an automatic restraint system which meets federal safety standards. MOMO has been advised it may well be a violation of federal law for any manufacturer, distributor, dealer or motor vehicle repair facility to remove an airbag or otherwise render it inoperative. Accordingly, federal law should be regarded as prohibiting MOMO distributors from removing an airbag steering wheel and replacing it with MOMO steering wheel. MOMO Expressly disclaims any liability for any and all damages, injury, or other recovery related to any MOMO steering wheel installed in a vehicle previously having an airbag system.