Customer Reviews

AO Safety/3M Tekk 95190 Woodworker's Respirator

5 star:		(49)
4 star:		(20)
3 star:		(5)
2 star:		(3)
1 star:		(1)

 

 

This is the first "woodworker's" or nuisance dust mask that I've been able to wear for more than 5 minutes without wanting to tear it off, throw it to the ground, stomp on it, douse it with gasoline, and set a match to it.
The rubber mask seals completely around my face, even against my beard, without being so tight as to cut off circulation to my brain. There are no air leaks fogging up my safety glasses. The dual exhalation valves really make the mask more comfortable for extended wear.

Add to all this the industry-standard round filter elements and this mask just can't be beat.

I've been a woodworking hobbiest for 6 years. I've purchased 4 or 5 kinds of cheap disposable dust masks over the years and couldn't get myself to use them consistently. They all either were uncomfortable, fogged my safety glasses, or smelled funny. I finally picked up this item a couple months ago and now I use it all the time (well, when I'm woodworking anyway). It's a great fit (no dust, no fogging) and just plain works. I'm sure there are other more expensive ones just as good, but why pay more. This is my best WW purchase in years.

Oh yeah, read the instructions when you get it. Taking a second to check the fit when you pick the mask on only makes sense, but I wouldn't have known to otherwise. Ok, here's the short version: when you put the mask on, put your hand over the front part and inhale. If you have a good fit, the mask will "deflate" until you exhale or remove your hand. With this test, you can tell that the bands don't have to be very tight around your head at to work properly. If you over tighten them, it will be less comfortable and you won't want to wear it all the time.

Pro: This respirator seems to work very well. I've used quite a few of the more expensive respirators rated for dust & pollen, adn this one does at least as well as the others. It is very light-weight, and has only one filter to change, keeping the cost of replacement filter to a minimum.

Con: I always wear a medium sized respirator, but this one is just too darn small! There's no mention of size, so I assume that it's supposed to be a 'one size fits all' kind of thing. However, that certainly is not the case. In order for it to comfortably fit the nose, the bottom of the cup is right on my lower lip. Or if I want it to fit my mouth comfortably, the top of the cup is pressing against the cartilige of my nose...very uncomfortable.

I am concerned about my health and I have for a long time been unable to find a dustmask that I could wear without fogging my safety glasses. With the 95190 Woodworkers Respirator its not A problem,It's comfortable and it provides me with clean air to breath. I highly recomend this dust mask in keeping ones lungs healthy, a small price to pay for good health.

I did a lot of research on the various types of respirators. My main criteria was that it was specifically made for woodworking applications. I selected the AO Safety model 95190. I choose it because of the good reputation of AO Safety, having dual filters instead of just one, and having two straps--one for your neck and one for the top of your head to ensure a tight fit. I have used it for a year now and am completely satisfied with its performance. I would recommend it to other woodworkers.

I purchased this dust filtering mask for use in spare-time woodworking. It is far superior to the disposable dust masks I have used and conforms well to the face without discomfort, even when worn for extended periods (although I have not used it in hot, humid conditions). I may even buy a second mask for occasional visitors to my woodshop. The disposable filter inserts last quite a while and are easily replaced.

The main complaint I have about the mask is it's fit. Initially - it felt a little uncomfortable - but I got used to it where it didn't bother me to wear the mask.

I was really excited to find an economical dust mask that I could replace filters and not spend too much money on the filters. I still have 2 packages of replacement filters that I'll probably never use - after replacing the filter once - the mask no longer seals around my face.

I think they could fix the problem if they had a dual point attachment connecting the strap to the mask. But it attaches at one point like a pair of swimming goggles so there's not alot of flexibility to adjust the fit.

My conclusion is you get what you pay for - and I'm currently looking for another alternative to replace this respirator. It worked well initially - when I could get a good seal around my face.

Jake

If you're looking for something more than a paper mask, but less than one of those bulky face attachments, this is probably the best respirator you can buy. Its lightweight, adjustable (convienent for those of us with small heads)and seals well around your mouth and nose.

My favorite part is that it doesn't disrupt the placement of my safety glasses, which is an issue I run into requently with respirators. Definately a great value for the money.

This respirator is comfortable and effective. I wear glasses and they don't fog up. I also get a good seal even with my beard. I've used this while sanding and it made a big difference.

Wore safety glasses and the standard paper dust masks together for years, assuming there wasn't really much of a solution to the fogging glasses problem. Finally, the other day, operating a circular saw blindly - not for the first time, I stood up cursing (not the first time). Logged on here and found this thing and all the good reviews. Not as big or weird looking as the picture makes it look. Waited way too long. Power tools and blindness are not a good combination.