TMS AR15 Flat Top One Piece Ring Mount Picatinny

by Tms

Product Features

• One piece body design for better scope alignment
• Offset design for easy scope position
• Made of aircraft grade aluminum alloy
• 1.58" (40mm) optimal center height for flat top AR15
• Good for use with both 30mm and 1inch scopes

Product Description

One piece body Design for better scope alignment
Two integral 30mm rings with 1" size inserts(installed as shown in picture) Offset design to better work with scope eye relief
Center height: 1.58" (40mm). Perfect for flat top AR15
Good for Magnified optics scopes with objective lens size up to 60mm
Ring width: 0.62"
Openning between rings: 2.16"
Attaches to flat top Picatinny rails
Locks firmly in place with 1/2" hex screws
Kit includes an extra ring top with accessory rail for use with accessories such as laser sight
Made of heavy duty quality aluminum alloy
Anodized black matte finish
Overall length: 3.43"
Weight: 4.6OZ
Base rail length: 2"
Recoil lug: cross-slot steel bolt shaft

Product Details

• Shipping Weight: 1 pounds (View shipping rates and policies)
• ASIN: B002BLLFQE
• Item model number: SMRT3D
• Average Customer Review: 4.6 out of 5 stars  See all reviews (27 customer reviews)
• Amazon Best Sellers Rank: #22,732 in Sports & Outdoors (See Top 100 in Sports & Outdoors)
  • #84 in Sports & Outdoors > Hunting & Fishing > Hunting > Hunting Optics > Gun Scopes > Rifle Scopes

Customer Reviews

Most Helpful Customer Reviews

9 of 9 people found the following review helpful:

5.0 out of 5 stars Quick on, Quick off but keeps its zero, July 24, 2010

By 

J. Biallas "lawyerjohnb" (St. Charles, Illinois, USA) - See all my reviews
(REAL NAME)   

Amazon Verified Purchase

This review is from: TMS AR15 Flat Top One Piece Ring Mount Picatinny (Misc.)

This scope mount is one of the best I have ever used on any of my rifles. It is superior to any 2 ring system I have ever used.
It is good for 30mm or 1 inch tubes and a cinch to put on a weaver/picatinny rail system.
The optional tightening nut can be hand tightened to a very snug fit with ease, allowing a quick on and quick off.
I have found that despite being on and off my Sig Sauer 522 numerous times changing place with my red dot sight, the scope always keeps its zero.
Outstanding product! Design, fit and finish are professional grade and the price is more than reasonable.

6 of 6 people found the following review helpful:

5.0 out of 5 stars Excellent mount - versitile & simple, August 15, 2010

By 

J. A. Wydra "Jdub229R" (North Carolina) - See all my reviews
(REAL NAME)   

This review is from: TMS AR15 Flat Top One Piece Ring Mount Picatinny (Misc.)

I was a little sceptical when I bought this mount. I didn't think the single fastner would keep this from moving. I was wrong; I shot a couple hundreds rounds of .223 & 5.56 from a bench rest over the weekend (sub MOA start to finish). I like it so much I am going to order a few more for my variuos uppers. The other great thing is; you can use it on just about any scope. I have both 1" & 30MM scopes; it clamps tight on either using the spacers that are included. The spacers are machined aluminum with stops to keep them in place while installing the scope. IMHO - for the money it is as good as the RRA canti or Burris PEPR.

3 of 3 people found the following review helpful:

5.0 out of 5 stars Great mount!, January 28, 2011

By 

Mook "mook" (California) - See all my reviews

Amazon Verified Purchase

This review is from: TMS AR15 Flat Top One Piece Ring Mount Picatinny (Misc.)

When trying to run a scope on my Smith & Wesson M&P15 AR I did not want to run scope rings, so I experimented with 2 previous mounts before I choose this one. Both had fitment and height issues, where as this mount seems to be just right! It sits my Redfield Revolution 3-9x40mm just right with the front sight, and allows enough clearance in the rear to run my Magpul Back Up Sight underneath the scope.

It is solid, sturdy, and mounts flush and firmly onto my rail. the 1/2inch nut has a groove for a flathead screwdriver to tighten it down, I chose a 1/2inch close-ended wrench. It is on there a SOLID. To keep it short and simple, this was a great choice for me, and I finally ended up with a quality mount at an affordable price.