Customer Reviews

TMS AR15 Flat Top One Piece Ring Mount Picatinny

5 star:		(21)
4 star:		(4)
3 star:		(0)
2 star:		(1)
1 star:		(1)

 

 

This scope mount is one of the best I have ever used on any of my rifles. It is superior to any 2 ring system I have ever used.
It is good for 30mm or 1 inch tubes and a cinch to put on a weaver/picatinny rail system.
The optional tightening nut can be hand tightened to a very snug fit with ease, allowing a quick on and quick off.
I have found that despite being on and off my Sig Sauer 522 numerous times changing place with my red dot sight, the scope always keeps its zero.
Outstanding product! Design, fit and finish are professional grade and the price is more than reasonable.

I was a little sceptical when I bought this mount. I didn't think the single fastner would keep this from moving. I was wrong; I shot a couple hundreds rounds of .223 & 5.56 from a bench rest over the weekend (sub MOA start to finish). I like it so much I am going to order a few more for my variuos uppers. The other great thing is; you can use it on just about any scope. I have both 1" & 30MM scopes; it clamps tight on either using the spacers that are included. The spacers are machined aluminum with stops to keep them in place while installing the scope. IMHO - for the money it is as good as the RRA canti or Burris PEPR.

When trying to run a scope on my Smith & Wesson M&P15 AR I did not want to run scope rings, so I experimented with 2 previous mounts before I choose this one. Both had fitment and height issues, where as this mount seems to be just right! It sits my Redfield Revolution 3-9x40mm just right with the front sight, and allows enough clearance in the rear to run my Magpul Back Up Sight underneath the scope.

It is solid, sturdy, and mounts flush and firmly onto my rail. the 1/2inch nut has a groove for a flathead screwdriver to tighten it down, I chose a 1/2inch close-ended wrench. It is on there a SOLID. To keep it short and simple, this was a great choice for me, and I finally ended up with a quality mount at an affordable price.

For the price, this really can't be beat! Comes with everything you need to install, and they even included an extra ring cap with a picatinny mount, so you can install just about anything on top of your optics. I also like the fact that this will work for both 30mm & 1" scopes. The only complaint that I have, is that the nut that secures the mount to my upper came a little loose during transport to the range. Not sure if this is going to be a reoccurring problem, but if so, nothing a little loctite couldn't fix. The scope holds zero and doesn't come loose/move around when I am shooting, which is all I was concerned about!

I would definitely recommend this product to anyone that is looking for a simple recreational mount. Shipping was also very prompt! As I mentioned before, you really can't go wrong for the price. Couldn't be happier with my purchase!

I need to start this by first saying that i just couldnt see myself spending $150-$200 on a LaRue or something similar just for something that holds a scope. I would rather put the money im saving towards purchasing or upgrading to a better scope. That being said, i purchased this one piece scope ring thinking that i just need something to mount my scope on my AR and that it didnt have to be anything fancy. So when this package arrived(and in only 3 days) i was extremely pleasantly supprised. Im not saying its a LaRue, im just saying the quality and craftsmanship cannot be beat for $30(not even close). It was much nicer than i expected and I would definitely recomend this product to anyone that needs to mount a scope. I wil be buying two more for myself as well.

It works great for my LMT 14.5 in AR 15. I love the fact that it has the "see thru" feature. I put it on top of a .83 in riser so I can still use my magpul popup "iron" sights with the scope and mount in place.

I put this on an AR 15 and installed a weaver 3-9 power scope. It holds zero very well~doesn't move. This item is durable and solid. It works perfect for a flat top. I have a front sight, yet with this mount I don't see it through the scope. There is no room for a BUIS with scope installed~don't really need it, scope is not powered. I would definitely purchase it again, I am very happy with purchase.

Good mount. I had the problem with the mount being loose, so I loosened the nut and rotated the grab plate 180 degrees. It tightened right up. Easy to use, easy to remove, and handles any size scope. I love it.

Bought this because I put a 4-12x40 scope on my AR, and the $40 "high" rings I bought to mount it were just too low, and made for awkward shooting. This did the trick and raised the scope about half an inch, which made a ton of difference in comfort and clearance (cleared the handguard better as well as left some extra room to grasp the charging handle). The fit and finish isn't quite as good as the more expensive mounts, but I have no complaints about performance and ease of mounting. Also, it's pretty nice that these are 30mm rings with 1" inserts. I'm sure I'll be buying these again as soon as I decide to blow a bunch more money on another gun that isn't in the "need" column.

The overall quality of this ring mount is good, it just has a design flaw. After mounting this ring on top of an AR-10 I was able to easily wiggle it back and forth making it impossible to maintain zero even before firing. There is no way it was going to hold zero under heavy recoil. The problem is the one side with the hex nut is too short. IMO, it is better to buy a ring mount with two secure points. Next time I will buy a different ring mount made in America and not China. I sent this unit back to Treadpro and they promptly refunded my purchase, I believe they even gave me credit for the return shipping. In that regard, the Amazon system gets five stars.