Customer Reviews

AccuShot Premium Mid-Profile Airgun .22 Ring for 1-Inch Scope (4 Screws)

5 star:		(16)
4 star:		(0)
3 star:		(1)
2 star:		(0)
1 star:		(1)

 

 

I'm very satisfied with these rings. There are a lot of flimsy scope rings out there designed for dovetail mounts, but these rings are some of the sturdiest I've seen. 2 screws securely clamp the rings to the dovetail, where most rings use only one. They are lined with friction tape to prevent scopes from slipping under heavy recoil, and to help keep the rings from marring the scope's finish.

Included in the package is a spare recoil stud and a spare screw in case these items get lost.

The rings themselves use 4 screws instead of two to secure the scope, again offering additional security over cheaper rings.

I'd recommend these to anyone looking to purchase scope rings for a .22 or an air rifle using a 3/8" or 11mm dovetail mount.

Very solid set of rings. I've had some cheap ones in the past and these are far superior. Good clamping force on both the scope and the dove tail. Fit and finish appears to be very good. I would definitely buy again...

I used these rings in combination with the 3-9X32 scope that I bought from Amazon. They worked well. I mounted them on a Crosman 2100, but plan on using them on a Crosman Quest 1000 in the future. The one ring has a stop in the bottom of it and I like the 4 screw desgin. I think it will hold the scope more securly than a single screw on both sides. For $8.50, I am satasfied. Over all, if you need dovetail rings, these should work well on your .22 or Airgun.

When mounting them, make sure you tighten them down because I had the scope loosen up on me and then you will have to sight it in again. Don't over tighten though. Archer Airguns's has a good video on Youtube showing the proper way to mount an airgun scope. That should help you mount it properly.

Make sure that you have a 1 inch tube scope when buying these rings. If you have a 30mm scope, you will need to buy different rings.

Over all, I am satasfied and I feel that they did their job properly and you will probabaly be satasfied as well.

Bought these as a replacement for the originals that came with the Quest. The originals just wouldn't hold. The Accushots hold like crazy. After a few shots(50) I re-tightened all the screws and zeroed it in on 25' air rifle targets at a distance of 30 feet. The last 25 shots were all in the black except for 1 flier with an average group of less than 3/4's of an inch center to center. All while standing up with the rifle resting on a towel on a not to steady cardboard box. The original CenterPoint scope performed fine and has held it's zero for 50 shots on these mounts. Crosman Destroyer 7.9 grain pellets were used exclusively. The reason I tried these rings was for the scope stop in the form of a pin that mates to the hole in the Quest and the 2 rail screws per clamp. Good product at a good price.

... break barrel, I used them to mount an older Crosman red/green dot sight I had lying around, these rings are no joke, the dual screrws work excellently even with the hard recoil of a .22 pellet.I would recommended these for a .22LR rifle with dovetail mounts... on that note FYI these are DOVETAIL rings not for use with Picatinny or other larger rails.

I got these to install a 4-16 X 40 scope on a .22 magnum rifle. I was really surprised at the quality of these relatively inexpensive mounts. They have two mounting screws for the bases and four screws for each of the two scope rings. Although it doesn't say so in the description the packaging they came in said they fit scopes up to 53mm. And although they are stated as airgun/.22 cal mounts they are solid enough for heavy recoil.
In short I highly recommend these mounts, I recently bought a set of Weavers that were nowhere near the quality of these...

These rings are absolutely outstanding. The thing that makes them so great is not only that they are perfect in design, engineering and manufacturing, but the 2 clamping screws in each ring allows for not 2, but 4 clamping screws to hold the rings to the rifle's dovetail. This allows for tremendous clamping power for keeping down scope creep with a heavy recoil rifle such as a spring loaded air gun.

Addendum, Jan. 13, 2012
Received a reorder of these rings and was pleasantly surprised to find that they have increased the size of the dovetail clamping screws which will better assure that the threads cannot be stripped due to over-tightening.
Also noticed that except for a very minor design difference in the top caps, these rings are identical to the current Hawke rings of the same description.

No long review required... the parts didn't even fit together right let alone work with my scope. one ring worked perfectly but the other one had the holes machined about 1/8" off and would have crushed my scope if I'd actually tightened it down. The misalignment was so bad that I had to angle the machine screws in to even get the threads to start grabbing. I've sent the whole mess back to Amazon for replacement but if the next set isn't right I'm going to order some quality rings from BKL

Not happy with this but hopefully Amazon's great return practices will save the day.

I am really pleased on how very strong and well designed these rings are. They have a anti slip lining to keep your scope from moving around under recoil. The double screws allows you to tighten the rings on bases very effectively. They even included some spare screws if you lose one. Wish other companies would do the same. A quality product.

These scope rings are a very solid constructed set of rings. I purchased for use with a 22 cal spring piston air gun. Many air gun/scope reviews I read talked of the need to buy only a scope rated for air guns and to get a solid set of rings. The front and back "shock" caused by the air spring can damage standard rifle scopes and cause lighter scope rings to move, making sighting the scope in a real pain. These rings are build so solid they should hold any scope tight on any gun.