As you may know, the new CCNP test requires IOS 12.4 which the cheaper routers do not support so you will need to step up to the 2600XM series. So understanding that you may want an advanced CCNA lab kit that you can use as a starter CCNP kit, we developed this kit for those on a limited budget. This kit will support all the features to pass your CCNA and give you a start on your CCNP certification. The 2600XM series is going to support 12.4, IPv6 and SDM. We include a 2610XM router which is your FE router and will support inter-VLAN Routing and will also house the NM-4A/S and act as the frame-relay router when appropriate. We also include a 2611XM router with two Fast Etherent ports so you will be able to set this up as a Cable/DSL, NAT/PAT Router. The 2500 series unit can be used in a few different ways and will support IPv6. In this kit we have a 3550 Layer 3 switch which I think you will find is really, really, really cool! It basically means it can do routing just like a router too! Additionally you will get a two 2950 switches that will round out your switch Domain. No one else has our copyrighted 224 page CertificationKits Self Study CCNA Lab Workbook that will walk you through 60 different labs! Why spend hundreds of dollars on a lab kit if you don't have the labs to accompany your equipment? Other kits don't have console kits, transceivers, back to back cables or the latest software. You will also get our CertificationKits CCNA/CCNP Test Engine with over 500 different questions. Not only that, but you will also get CCNA test tips, the IOS on CD, CertificationKits TFTP Server and other prep material. There is also more! You will also receive our CertificationKits CCNA CRAM Sheet. This six page, full color, laminated foldout is a great addition to your CCNA Study arsenal. You will also get our CertificationKits CCNA TCP/IP Study Poster. Finally, we strongly suggest adding the CCNA 640-802 CBT DVD option to your kit. This CCNA computer based training is...