From the Manufacturer
This is the TREX 450 Pro 3GX Super Combo kit from Align. Built from the amazing 450 Pro platform, and with a new flybarless head, this heli uses the 3GX system to provide some of the most amazing controlled agilty possible! The 3GX utilizes brand new gyroscope sensors of the highest specifications when compared to other flybarless systems currently on the market, allowing it to be used under harsh conditions. Dual axis plus rudder sensor dramatically improves swashplate and rudder correction precision compared to last generation 3G. This is clearly noticeable in stable hover as well as highly aerobatic routines. 3GX utilizes 16 bit processor which is 4 times faster than previous generation, along with a completely re-written firmware. The result is a dramatic stability improvement from previous generation, with stability that rivals a flybarred helicopter, yet posses explosive agility. With built in pirouette compensation function, 3GX is able to stabilize the helicopter on a fixed point during pirouetting maneuvers. Pirouetting flips type of maneuvers are easily accomplished with precision. 3GX's rudder control is similar to the high end GP-780 gyro in that rudder sensitivity is catered specifically for the helicopter's rudder response characteristics, allowing consistent rudder feel even under high speed conditions. This excellent control feel will allow pilot of all skill levels to experience the perfect integration between 3GX and helicopter. Additional peripherals planned for the 3GX includes 3-axis accelerometer, 3-axis magnetic compass, and GPS positioning system. While the commonly available position hold gyro system utilizes only 6 sensors, 3GX’s total of 10 sensors ensure positioning of helicopter with superior accuracy, providing the ultimate solution for aerial photography or other special purposes.
Includes:Requires:T-REX 450 PRO 3GX Kit Set X1 set1.Transmitter(6-channel or more,helicopter system)3GX Flybarless System X1 (AGNHEG3GX01)2.Receiver(6-channel or more)325D 3G Carbon blades X1set (AGNHD320D)3.Pitch gaugeX1RCE-BL35X 35A Brushless ESC X14.11.1V 3S Li-Po 2000~2300mAh batteryX1450MX Brushless motor(3400KV) X1 (AGNHML45M01)DS410M (Metal Gear)Digital servoX3 (AGNHSD41002)DS520 Digital servo X1 (AGNHSD52001) Specification:(T-REX 450PRO V2) Length: 635mm Height: 230mm Main Rotor Diameter: 710mm Tail Rotor Diameter: 158mm Motor Drive Gear: 15T Main Drive Gear: 150T Autorotation Tail Drive Gear: 106T Tail Drive Gear: 25T Drive Gear Ratio: 1:10:4.24 Weight(w/o power system): 530g Flying Weight: Approx. 640g