648637 Features: -Removal pieces: Combo yoke, national fine center screw, center point piece and bolt pairs. -Installation pieces: National fine center screw, thrust bearing, forcing nut and jaw nut. -Kit 12 includes 22-piece for removal and installation of harmonic balancers with threaded holes. -Adapters included: M12-1.5, M14-1.5, M16-2.0, 0.44''-20, 0.5''-20, 0.56''-18 and 0.75''-16. Product Type: -Pullers. Use: -Bearing/Harmonic Balancer. Quanitity: -Set. Generic Dimensions: -10.25'' H x 13'' W x 3'' D. Dimensions: Overall Height - Top to Bottom: -10.25 Inches. Overall Width - Side to Side: -13 Inches. Overall Depth - Front to Back: -3 Inches. Overall Product Weight: -7.63 Pounds.
From the Manufacturer
Each kit includes step-by-step usage instructions and photos showing the tool in use. Instruction sheets are laminated to resist staining and are permanently fastened to the case. All instructions are developed by a professional repair manual writer. Kit 12 tool set is for removal and installation of harmonic balancers that have threaded holes. For removing balancers, the kit contains 2/3 combo yoke, 5/8-Inch by 5/8-Inch national fine center screw, center point piece and the following bolt pairs: 3/8-Inch-16 by 4-Inch national coarse, 3/8-Inch-24 by 2-Inch national fine and 5/16-Inch-18 by 2-Inch national coarse, M8-1.25 by 80mm and M10-1.5 by 50mm. For installation of balancers, the kit contains 7/8-Inch by 4-1/4-Inch national fine center screw, thrust bearing, forcing hut, jaw nut and the following adapters: M12-1.5, M14-1.5, M16-2.0, 7/16-Inch-20, 1/2-Inch-20, 9/16-Inch-18 and 3/4-Inch-16.