The American Dryer DR10TNSS stainless steel cover automatic hand dryer has a one-piece, 18 gauge, type 304 stainless steel cover with brushed finish; a permanently lubricated, maintenance-free, brushless induction motor for reliable service; and an infrared sensor that turns the dryer on when hands are under the outlet and off when they aren't to reduce the risk of germ transmission by eliminating the need for a manual control. This hand dryer is rated for 110-120 volts and 60 hertz for use with single-phase power in North America, and 15 amps for use in older buildings with limited electrical capacity. Two tamper resistant screws hold the cover to the mounting base to help reduce vandalism damage (security hex key included), and the air intake vents are shielded for additional protection. The air nozzle is chrome-plated to resist corrosion, and rotates 360 degrees to allow alternative airflow directions. The motor and the heating element unit each have an automatically resetting thermal protector to help reduce the need for parts replacement in case of damage or failure. This hand dryer is compliant with standards for use in the United States and Canada by United Laboratories (UL), and the automatic sensor is compliant with the EU Restriction of Hazardous Substances Directive (RoHS) for environmental and human safety.
|Motor horsepower||1/10 hp|
|Motor speed||3,200 RPM (revolutions per minute)|
|Air flow||160 CFM (cubic feet per minute)|
|Air velocity||5,500 LFM (linear feet per minute)|
|Air temperature||130-145 degrees F at an ambient temperature of 72 degrees F|
|Automatic shutoff time||60 seconds|
|Sound level||71 dB|
|Voltage rating||110-120 volts|
|Amperage rating||15 amps|
|Overall dimensions*||9-1/4 x 11 x 8-7/8 inches (H x W x D)|
*H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Hand dryers have electric motors that blow heated air to dry hands with. They are mounted on a wall, and are hard wired to a dedicated electrical circuit. Hand dryers are typically installed in high traffic or public restrooms to reduce the costs associated with providing high volumes of clean towels and removing used ones.
World Dryer manufactures hand dryers, hair dryers, and baby-changing stations. The company, founded in 1948, is headquartered in Berkeley, IL.