The American Dryer Global GX3-M steel cover automatic hand dryer has a one-piece 18 gauge steel cover with white epoxy finish for corrosion resistance; a permanently lubricated, maintenance-free, brushless induction motor for reliable service; and an infrared sensor that turns the dryer on when hands are under the outlet and off when they aren't to reduce the risk of germ transmission by eliminating the need for a manual control. This hand dryer is rated for 208-240 volts and 50/60 hertz for use outside of North America, or with three-phase power, commonly found in commercial/light industrial buildings in North America. Two tamper resistant screws hold the cover to the mounting base to help reduce vandalism damage (security hex key included), and the air intake vents are shielded for additional protection.
The motor and the heating element unit each have an automatically resetting thermal protector to help reduce the need for parts replacement in case of damage or failure. The automatic sensor is compliant with the EU Restriction of Hazardous Substances Directive (RoHS) for environmental and human safety. This hand dryer is compliant with standards for use in the United States and Canada by United Laboratories (UL). To comply with Americans with Disabilities Act of 1990 (ADA) Standards for Accessible Design and International Code Council (ICC)/American National Standards Institute (ANSI) A117.1 Accessible and Usable Buildings and Facilities standards, the hand dryer can be installed with a recess installation kit (sold separately).
|Motor horsepower||1/12 hp|
|Motor speed||3,100 RPM (revolutions per minute)|
|Air flow||130 CFM (cubic feet per minute)|
|Air velocity||4,500 LFM (linear feet per minute)|
|Air temperature||130 degrees F at an ambient temperature of 72 degrees F|
|Automatic shutoff time||80 seconds|
|Sound level||63 dB|
|Voltage rating||208-240 volts|
|Amperage rating||6 amps|
|Overall dimensions*||9-3/8 x 10-1/8 x 5-5/8 inches (H x W x D)|
*H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Hand dryers have electric motors that blow heated air to dry hands with. They are mounted on a wall, and are hard wired to a dedicated electrical circuit. Hand dryers are typically installed in high traffic or public restrooms to reduce the costs associated with providing high volumes of clean towels and removing used ones.
World Dryer manufactures hand dryers, hair dryers, and baby-changing stations. The company, founded in 1948, is headquartered in Berkeley, IL.