Customer Reviews

Antec P180 Advanced Super Steel Mid Tower ATX Case

5 star:		(5)
4 star:		(5)
3 star:		(1)
2 star:		(1)
1 star:		(1)

 

 

I had bought this pc case a month ago after doing a search on the internet for a computer case on a new build. What I have found out about the case after I've recieved it is that it is a very quiet case due to the way the case itself is constructed, unlike typical aluminum case which are thin the design of the walls of this case is made of 3 layers; aluminum-->dense plastic-->aluminum. By doing this the walls themselves absorbs any vibrations caused by the internal components such as fans, hard drives, optical drives...etc. The main point to this is that the case was design to be air cooled since the insides are a bit cramped due to the fact that the psu is isolated on the bottom level with a gondola for 4 3.5in drives, this is done so that there are two different levels of heat zones in the case; kinda like the apple G5 tower. Because of this the upper level where the motherboard, cpu, drives, and the rest of the components are located is not too spacious so if you'r going for liquid cooling a external unit is much better than a internal one. Plus there is a black box screwed to the inside of the case called a vga cooler which you can attach a optional 80mm fan to; this is done to cool down your video card or cards if you have SLI. When you get a power supply for this case make sure you get one that is compatable with the case itself, I had bought a 500w Ultra X-Connect psu from amazon.com and getting the 24pin Mobo cable through the small openings inside the case was a pain since the cables on this psu are a bit stiff so it took a bit of force to get it to go through. So regular psu's with a bunch of cables coming out of the back of the unit is a better choice here.On the out side every thing was fine; the silvery exterior goes well with home theater setups; very simple and clean looking. The only gripe I have with the outside is that the front case door itself is a bit flimsy so rough handeling would probably cause it to break off. So here is my over all view of The Antec P180 case--> PROS: quiet case design, attractive exterior, comes with 3 120mm antec 3 speed case fans. CONS: flimsy front case door ,and skimpy manual on how to put the case together. Over all a good buy on a mid price range computer case.

The Antec P180 is one of the best constructed computer cases I have seen at this price point. The points I liked about it are:

1. Attractive and well made. Layered steel and plastic walls are durable and help deaden fan sounds.

2. Unique configuration places power supply at the bottom of the case in away from the CPU. The power supply sits in its own chamber. This dramatically reduced the heat level in the main motherboard chamber (at least in my rig).

3. Three 3-speed 120mm fans do an excellent venting job. One pulls air from the front over the lower hard drive chamber and into the power supply. The other two sit at 90-degree angles in the top and rear to vent heat from the motherboard chamber. There are mounts for 2 more 120mm fans; one suction fan for middle HD chamber and another that sits over the GPU position on the motherboard.


What I found to be 'annoying' about this case:

1. Door for running wires from lower power supply chamber to motherboard chamber could be better designed. A Real challenge to get my fingers through there.

2. No removable motherboard mounting plate. Motherboard mounts directly to rear wall. (Main chamber is roomy however.)

3. HD mounts are rather flimsy and there is no shock mount provision for 5.25" chamber.

4. Instructions manual from Antec could be better.


The reason I say this is not for everyone is that this case definitely requires pre-planning. If you are new to PC assembly, or used to 'winging it' this might not be the case for you. My building notes are as follows:

1. PREPLAN, PREPLAN, PREPLAN. With the power supply in the bottom, not all makes of PSU are going to have cables that reach everything. If you purchase this case, think about it before you buy your PSU. (Antec TruPower 2.0 550W worked for me.)

2. Install the PSU near the end of the build; otherwise you will not have room to maneuver.

3. Remove the lower fan during the PSU install. If not you will have a hard time running your cables up.

4. Plan your cable routes and tie where necessary.


That all said, this is a really great case. I am very happy with it.

The guy that said, "Oh, another thing you should know, it doesn't have any front panel LED. So you don't know when the system is accessing your hard drive and if it weren't for the sound of the fans you could not tell wether the computer is on or off. I guess that's a minus." is wrong.

There is at least one blue LED light for the HDD activity right above the reset button, and another one above the power button that is not active on my machine. I haven't plugged quite all of the connectors in from the front panel. A look at the manual should tell you what it does... my guess is a second HDD activity light. There is also a small pinpoint power status LED right below the power button that is always active when the computer is on.

Some more tidbits: The case is wonderful for starters.. the lower power supply compartment design is excellent, but makes running cables a little tricky. All of my HDD's are down there, while the upper HDD bay has been removed and a fan installed at the front of the case for better air flow. I have also removed the VGA cooler and plugged the holes, and disabled the top fan and plugged it's opening too. So the air flows in from the front and out the back. My system is fairly quiet, and stays relatively cool. Playing the heavy load games definitely warms up the BFG7800GTX but the VGA cooler and top fan don't help that.. I need and am getting a Danger Den liquid cooling system.

Personally, I wish I didn't have to remove, disable, and plug up holes... but it's a sweet case nonetheless. I did a ton of research for the perfect case, and originally had a ASUS Vento which was just too cramped - this case is decent. If you really want room go with a Stacker or something of the like.

One more thing.. over time you'll realize you can get better air flow by just leaving the door open, and removing the clicky-doors that cover the dust filters.

The front mounted USB and Firewire ports are excellent.

The last beef I have is the sandwich style lamination of aluminum/plastic/aluminum seems like a good idea, but over time the temperature will warp the doors and panels, and the adhesive holding the brushed aluminum on will start to peel away. This has happened to mine in less than 6 months. This makes the fron door not want to close well because it's bowed and the magnetic latch doesn't quite reach anymore. Since I leave the door open it's not really a problem. I might close it up once in a while when we have company over to give my desk a really polished look.

Bottom line, it was worth it then.. and even with the quirks this case is top of the line. I didn't really get into the inards, but they are sweet and you'll love it.

I've ordered 5 of these cases now and will continue to use them for quite a while. It is extremely well built and looks great as well.

Great case, I have used it for over 5 years now and I have had no problems.

I really like the fact that it has air intake filters to keep dust and other particles out. The split level case with the power supply apart from the motherboard cuts down on the noise and heat. Wire management can be a bit of a hassle but it is not too hard to work around. Lots of places for 120mm fans, and lots of space for addition drive.

Price was a bit high but I feel it was worth my money for the amount of time I have been using it.

I would recommend this to anyone looking for a solid case with a decent amount of room to work in.

Don't get me wrong, see the title of my review, this is a beautiful case. I absolutely adore this case. This is the best case I have ever seen let alone owned.
My disappointment with this case comes in Antec's decision to place the power supply at the bottom of the case. I love having the power supply and drives in their own compartment, the issue is having to pull power cables over the motherboard to the connectors. In particular my 4-pin ATX power cord for power to the CPU doesn't reach without pulling it tight across the CPU fan. I've ordered an extension to make it work.
The cables are blocking the card slots and S-ATA ports. As mentioned above I've ordered an extension for the 4-pin, I've also purchased an extension for the 24-pin power cable. Now I need to route my cables so that they look good and are useful. I'll use small tie downs to tie them to the right side of the case, the side that you don't normally remove.
I hope, in the end, to have an installation that is functional and nice looking, I really do love this case and want it to work out.

Things I love about the case:

The side walls are laminated sheets, first a sheet of aluminum, then a sheet of plastic, then a second sheet of aluminum. The panels feel very sturdy.

Fans, the case has three 120mm fans, I didn't feel the need to add another although there is space for an intake fan at the front of the drive bays.

Rubber stand offs for the hard drives. Each hard drive is mounted on rubber grommets to lower noise and vibration.

Drive rails for 5.25" drives. The drive rails are cool. You screw them onto your DVD or other drives and slide the drives into the case. The rails snap into place in the case securely holding the drives without screwing them into the case.

This case is large and heavy and wonderful. I highly recommend it, try it and you'll love it, just get extension cables for your power supply.

Got this case for a new build with an EVGA 123-YW-E175-A1 nForce 750i SLI FTW 775 Mainboard - Retail, Intel Core 2 Quad Q6600 Quad-Core Processor, 2.40 GHz, 8M L2 Cache, LGA 775 processor and an Geforce Gtx 260 Pcie 2.0 896MB DDR3 2PORT Dvi 576MHZ Far Cry 2 graphics card.

Overall this is a pretty good case. Installing the mobo was really easy, and it is very well designed in terms of cable management. Just make sure you have a PSU with cords that are long enough. I'm using an Apevia Quartz 750W and they can all reach. It's a rather large PSU however (though not the biggest) and it barely fit with the lower fan. It's not a modular PSU, but if it was, i would have had some real trouble plugging in the cords.

And i wish this case was an inch or 2 deeper. I have a GeForce GTX 260 video card, which is 10.5 inches long (and that's the lenght for most high-end gpus) and it barely fits. It made one of the upper hard drive trays useless because it was in the way, and didn't leave room to install a fan on the upper HD cage. But i'm using the lower cage anyway.

My biggest beef with this case is the stock fans. Don't believe people when they say this case is cool and quiet: i have the top and back case fans on high and they are rather loud, and my internal temperature after running the computer for about half an hour, and not under a particularly heavy load, is usually in the 90's Fahrenheit. And i wish the case fans had 3-pin connectors in stead of the built in speed controllers, so i could control them with the mobo or a fan controller. I will def replace these.

And also a minor annoyance, the connector for the power led is 3 pins wide (the + and - pins on either side of an empty pin), which is nonstandard. Most motherboards have a 2-pin connector, with no empty pin in the middle, so for now, i have no power LED.Intel Core 2 Quad Q6600 Quad-Core Processor, 2.40 GHz, 8M L2 Cache, LGA 775

Had no problems other than installing the power supply. The could have done a better job with it. You have to remove the video card exhaust in order to insert the power supply and to install any PCI expansion card you might have.

The ventillation is amazing and the system stays cool must of the time. The dust already installed dust filter are a very neat attachment which keep the system from collecting dust inside to a minimun.

I really like this case. Oh, another thing you should know, it doesn't have any front panel LED. So you don't know when the system is accessing your hard drive and if it weren't for the sound of the fans you could not tell wether the computer is on or off. I guess that's a minus.

This case is very well designed for sound proofing and air flow, recommand for quiet-pc users.

This is the most nonfunctional piece of *&*&*(!. The plactic slides on the side panels broke several times. The top fan vent slides on and off too easily. The swinging door plastic pivots also broke. If you don't purchase an antec power supply you will have to purchase extensions for just about all your connectors. One of the two front panel usb ports broke. the space between the power supply, preinstalled fan in the bottom, and the hard drive rack is way to cramped for such a large case.

This case is beautiful if you plan to never touch again after the original build.