Heavy-duty, UV-rated plastic post protects lighting fixtures from damage. View larger.
Dual openings and an angle-cut bottom for easy wiring access. View larger.
With an overall height of 19-1/2 inches, the GARD-N-POST light fixture support is perfect for illuminating a walkway, backyard, garden, or anywhere else you need a little extra light, and/or an extra GFCI outlet or low voltage connection (phone, security, entertainment). The post's angle-cut bottom provides easy access to underground wiring.
Choose from one of Arlington's GARD-N-POST light fixtures (sold separately), or connect any outdoor light fixture (up to 25 pounds) using the 1/2- or 3/4-inch NPT threads. The post comes with an installed NPT metal reducing bushing.
Dual Openings for Back-to-Back Power
The Arlington GARD-N-POST has openings on both sides to set up back-to-back power. For added convenience, a low-voltage separator is included so you can install a power and a low-voltage outlet on either side of one post. The post also comes with a locknut with copper ground wire for fixture installation, two blank device plates with gaskets and screws, and a removable KO plate.
Sturdy, Long-Lasting Construction
The GARD-N-POST provides rigid support right out of the box with four built-in stabilizers and heavy-duty plastic construction. Plus, thanks to molded-in color, the finish won't chip or fade over time, increasing the life of the support. The post comes with a plug for the top hole, for good looks and protection when there isn't a light fixture installed.
Overall, the GARD-N-POST, with stabilizers, measures 19-1/2 by 8 by 8 inches (H x W x D). The post itself measures just under 3-1/2 inches square and 19-1/2 inches tall. The finished height from ground level (up) varies depending upon how deep the post is buried and can be buried up to 1 inch below the access panel.
The GARD-N-POST is a UL-listed enclosure, and is backed by a one-year limited warranty.
About Arlington Industries
Since 1949, Arlington Industries has been providing solutions for electrical installations, saving installers time and money while delivering attractive, labor-saving, and cost-effective products.
What's in the Box
Post, locknut, copper ground wire, two blank device plates, gaskets, screws, plug, low voltage separator, and KO plate.
The GARD-N-POST has openings on both sides for back to back power
and a plug for the top when there isn't a fixture installed.