BébéSounds Angelcare Movement Sensor w. Sound Monitor w. Two Parents' Units

by BébéSounds

• Under-the-mattress Sensor Pad detects your baby's slightest movements
• Very simple to set up
• Three modes to choose from
• Includes two handheld parent units as well as a nursery unit
• Can be battery operated

Product Description

Amazon.com

Parents of preemies and infants at increased risk of SIDS lose a lot of sleep wondering if their babies are still breathing. Even parents of healthy babies experience this kind of anxiety. With its movement sensor pad, sound transmitter, sound lights, and movement detecting "ticking" sound, The Angelcare Movement Sensor with Sound Monitor can take away virtually all this anxiety.

Three Functions, Infinite Peace of Mind
The Angelcare Movement Sensor has three modes of use, enabling parents to use the sensor/sound monitor well into toddlerhood and beyond, if desired. With the Sound & Movement function, you can hear your baby’s sounds, see sound lights, and hear a "tic" sound with every movement the baby makes. If no movement is detected, the "tic" will stop and after 20 seconds the alarm will sound. In the Tic Off mode you will not hear the ticking sound with every movement. However, you will still hear the baby’s sounds and see sound lights, and your baby’s movement is still being detected. An alarm will still sound if absolutely no movement is detected for 20 seconds. And finally, with Sound Only, the movement sensor is disabled, but you will still be able to hear your baby’s sounds and see sound lights. In this mode, the Angelcare functions as a regular sound monitor. For many parents, just being able to hear the sighs and squeaks of the newest member of the family is reassurance enough. For those who need more input, for whatever reason, the additional sensory features of the Angelcare can be lifesaving.

How the Angelcare Movement Sensor Works
A sensor pad is placed under the center of baby’s crib mattress on a flat, hard surface. The sensor pad cord passes underneath the mattress entirely, exiting the crib in the corner. It is then plugged into the jack of the nursery unit transmitter. The nursery unit can be plugged into an electrical outlet or it can operate with four AAA batteries. The same goes for the parents’ unit receivers (two parents’ units included). Turn the parents’ units on by selecting either channel A or B. Make sure they’re set to the same channel as the nursery unit. Set the nursery unit to the desired mode (Sound & Movement, Tic Off, or Sound Only). You may leave one parents’ unit in your bedroom and carry the other with you as you move about the house and yard. Now, depending on the function you’ve selected, you’ll be able to keep track of your baby’s every sound and movement.

Sound Lights
Indicator lights on an LED sound bar (on the parents’ unit) allow you to "see" your baby’s sounds if background noises prevent you from hearing baby. As baby’s sounds get louder, more lights illuminate.

Optional "Tic" Feature
When the nursery unit is set to Sound & Movement, it will continuously tick with every movement your baby makes. If no movement is detected by the sensor pad beneath baby’s mattress, the ticking will stop.

Movement Indicator Light
The movement indicator light is located only on the nursery unit. When the nursery unit is set to Sound & Movement or Tic Off, the movement indicator light will flash green with baby’s every movement. The flashing green light will let you know that movement is being detected, which will allow you to check on a sleeping baby in the dark.

False Alarms
False alarms are possible with the Angelcare Movement Sensor, especially if instructions have not been followed to a "t". Make sure to turn off the nursery unit after you’ve taken baby out of the crib. Also, once baby starts being more mobile, she may roll right off the sensor pad area of the mattress. A troubleshooting guide in the instruction manual gives other solutions to false alarms.

What’s in the Box
Angelcare Movement Sensor includes movement sensor pad, nursery sound monitor, two parents’ units, instruction manual, and three AC adapters. Twelve AAA batteries are required (not included).--Emilie Coulter

Product Description

Keep yourself and your spouse from worrying when baby is sleeping with this highly sensitive Angelcare Movement Sensor with sound monitor and 2 units. The sensor pad monitors the entire mattress and detects all baby's movements, even the slightest, whether awake or asleep. An alarm sounds only if absolutely no movement is detected for 20 seconds. The set also includes a regular nursery sound monitor and 2 parents' units. The nursery and parents' monitors have dual channels for optimal reception, movement indicators and alarm, low battery indicators, and for extra assurance, an optional "tic" feature that transmits sounds with every movement baby makes. The parent units also allow you to leave one in the bedroom and the second in the room that you are in. Includes movement sensor with sound monitor, under-the-mattress sensor pad, nursery unit, 2 parent units and 3 AC adapters. Imported. 15Hx10-1/2Wx4L".

See all Product Description

Most Helpful Customer Reviews

429 of 435 people found the following review helpful

5.0 out of 5 stars Great Monitor for Peace of Mind January 28, 2005

By A. Moore VINE™ VOICE

We have used it with the movement sensor for my son's first year and without the movement sensor for the last 6 months. (My son is now 18 months old.) We love this monitor for several reasons.

1. The monitor with movement sensor can be used in a basinet, portable crib, or a regular crib. Just make sure you put a plywood board under the sensor pad if the bottom of the basinet or crib is soft or just a spring base. This helps prevent false alarms. The sensor also packs easily in a suitcase for travel.

2. The monitor has a good range and is clear. We have a large house and yard. This monitor works at the complete opposite end of the house and throughout our yard.

3. Our son was a preemie and this monitor gave us the piece of mind to sleep at night, especially with the fear of SIDS. It truly detects movement and not just weight. (We tested it with a large dictionary and the sensor went off after a few seconds.) It picks up your child's movement from breathing even in the sounded state of sleep. When our son started rolling over and became a tummy sleeper (even though we put him to bed on his back) the monitor was the only reason I slept at night.

4. You can use this sensor in several modes. It has one mode that give an audible beep with each movement as well as detecting sounds from the nursery (for extra piece of mind and so you know it is working if you are really nervous), another mode that detects movement (and sounds) and sets off an alarm if baby does not move for 15 seconds, and the last mode lets you shut off the movement sensor and use it just as a sound monitor (great for an older baby or toddler and you don't need to buy a new monitor). We also liked that before the alarm went off, it gave a warning beep. This gave us time to go in and check on our son, before the alarm went off and woke him up. We had no false alarms with this monitor when our son was an infant, and a few when he started really moving in his sleep because he would roll off the monitor pad. It just took a little experimentation with pad placement to fix this situation.

5. Baby slept better with this monitor because we were not constantly going into his room to check on him and accidentally waking him up.

6. The monitor also has a light display that lights up more lights (in a row) when your child makes more noise. I can visually look at the monitor in the middle of the night and tell by the display if he is sleeping soundly.

7. The monitor has two bands (a & b). You can switch bands on both the nursery and parent unit if one band is getting a lot of static or interference. If you have two small children you can also use two monitors, one set to each band.

We love this monitor so much that we are planning on purchasing a second unit before the birth of our second child.

117 of 122 people found the following review helpful

5.0 out of 5 stars THIS MONITOR SAVED MY DAUGHTER'S LIFE! A DEFINITE MUST FOR EVERY SINGLE PARENT OUT THERE! January 17, 2006

By A. Palau

PLEASE READ>>>>>>
It was Sunday, January 15 and my husband and I were sound asleep. All of a sudden a hear the alarm from the monitor go off and when I went into my daughter's room, she was facing down on her crib (she turned on her own; she does not sleep on her belly) and I went to turn her and she was blue.

It was the most horrific experience my husband and I have ever been through. I screamed for my husband and he came in and gave her rescue breathing (CPR) and with his first breathe, she came back to life. I was on the phone with 911 as he was performing his second breathe and she came back to her normal self 20 minutes later.

We don't know how long she was without breathing, but thanks to the monitor, we were alerted in time to save her life. We only have had 2 false alarms since she was born (she is 4 months old) because she was deep sleeping. Two false alarms is nothing compared to the fact that you can feel comfortable knowing this product does work and can save your baby.

PLEASE LET EVERYONE YOU KNOW ABOUT THIS FANTASTIC PRODUCT! IT IS DEFINTELY WORTH THE $99 and more than anything, your baby can be saved, just like my baby girl was.

UPDATE: DECEMBER 17, 2012.
Hello everyone! My daughter is now a healthy 7 year old and I still stand by and recommend this product. I also used it for my youngest daughter and it worked great. That was one of the scariest moments of my life. We spent 5 days in the hospital and I am so grateful that she was fine. I hope that you find this product as helpful as I did. It's a true life saver. Happy Holidays!

138 of 146 people found the following review helpful

5.0 out of 5 stars Excellent! Get it! You won't be sorry September 6, 2004

By B. Petty

I got this after considerable research on baby movement sensors. I compared features, false alarms, etc. And I can tell you can I have been VERY pleased after using this for 2 months after bringing home out baby from the hospital.

Our little 2 month sleeps for 10 hours straight through the night! Why? Because with the Angelcare Movement Sensor, we're not afraid to let him sleep on his belly. Of course, we remove all blankets and the pillow to reduce the chance of SIDs. But I have complete faith in this product.

We using the sensor in a basinet for now. Make sure the sensor is under a wooden board. I think the people who have had bad luck with this product maybe didn't follow these directions.

The sensor has gone off twice. Once when he was 2 weeks old and later when he was 6 weeks old. We came running to check him out and he was fine. We'll never know if it was a false signal, but again, I trust my son's life with it. It's eased our sense of fear of SIDs and let's us get a full night's sleep. I highly recommend it.