Customer Reviews

Boeshield T 9 Rust & Corrosion Protection Waterproof Lubrication 12oz (aerosol)

5 star:		(18)
4 star:		(1)
3 star:		(1)
2 star:		(2)
1 star:		(1)

 

 

I have a small garage shop with not a few cast iron tools sitting around. During certain times of the year I have a problem with humidity and surface rust. This Boeshield T-9 spray is a good solution! Though I used to use a lot of WD40 and steel wool to keep the rust at bay, this stuff is way better. While the surface is rust free, spray the T-9 on and let it sit a while and then rub it off with a clean rag. The surface is then lubricated and coated to prevent further rust. Wood GLIDES across the metal after a treatment of T-9. Buy some - you will love it!!!

Rust will not form if you use this stuff. Contains no silicon.

If you are looking for a good rust preventer, this is the best. I use it on my shop tools and am totally rust free.

I first tried Boeshield T9 in the 12 oz spray cans back in 2006. I bought 2 cans, and they both stopped spraying when the cans were still 1/2 - 3/4 full!

Boeshield replaced the products, and all was OK.....until about a year & a half later.

I just tried using the replacement cans on my snowblower, before storing it away for the season. When I first received them in 2006, they worked just fine. Now, however, NO PRESSURE! This is the same problem shown by
the original 2 cans (different lot#)!

Until proven otherwise, Boeshield seems to have a major quality problem with their 12 oz spray cans.

The product itself is great at preventing rust. The squeeze bottles are probably OK, but I WOULD NOT trust the spray cans to last more than a month or two. Buyer beware.

I needed to place a table saw and jointer in storage while doing a two year overseas tour of duty. Based upon advice from Delta, I sprayed a thin coat of this on my table saw and jointer surfaces then rubbed it in. Repeated once more then sprayed on a heavy coat and let it sit.

After returning from overseas and getting the tools out of storage I found that the material was still tacky and had collected quite a bit of dust. Fifteen minutes with a scotch-brite pad and some mineral spirits removed all the T-9 and revealed two perfectly preserved tool surfaces.

Considering these tools were stored in coastal New England with no climate control, I was extraordinarily impressed. Some hidden areas of the table saw that had not been given the same treatment were coated with a layer of rust that would have been disastrous had it been on the working surface.

I discovered Boeshield when I was a Marine Electronics editor (for national magazines) in the early 1990's. The folks at Boeshield gave me 2 4oz cans that I hoarded for years before the Internet came along.

I guarantee Boeshield out-performs any lubricant for protection and freeing up frozen parts. Buy with confidence!

Great for lubing smaller bike parts and keeping steel frames from rusting - this stuff is Sold by Bike Friday in Oregan for their folding bikes - it is usually not in bike shops - but it is GREAT on smaller bike parts (shifters cables and inside the frame)

After polishing alloy wheels I treated them with Boeshield. It leaves a waxy film that attracts dust and dulls the finish, however there is no sign of tarnish or oxidation. Very easy to clean off when you want really bright wheels.

I use it to safeguard my Denali 10 Inch Compound Miter Saw from Michigan's variable weather extremes. It does what it says and does it well. T-9 actually loosens rusted parts, and because it won't harm paints, plastics, or vinyls, you can safely use it without having to be extremely precise about where its coverage is going. It will protect your tools for months at a time. T-9 corrosion protection is widely used for air, sea and land equipment. It's a small price to pay to safeguard your tools. ~ The Boss

I've used T-9 for years. This is the best lubricant, rust prohibitor, penetrant available. Beats WD-40, hands down!
Buy it and try it! You'll like it.