Bosch 1677MD 15 Amp 7-1/4-Inch Wormdrive Construction Saw with Direct Connect

by Bosch

Product Description

Amazon.com

If you're looking for unparalleled power, here's the saw for you. In addition to the sheer brawn, Bosch really has finessed this machine, and the beauty is in the details. Our favorite feature is the Direct Connect system: The tool itself has no power cord, just a receptacle for your extension cord and a super locking mechanism to keep the cord connected. It's so secure that you can actually lower the tool off scaffolding to the ground by the cord. Next time you accidentally cut the cord, it won't put the whole saw out of commission: Just grab another extension cord. Storage is a breeze, too, because there's no integrated cord to tangle with. We love the left-side blade for unmatched line of sight, the worm drive gear train will hold up for years under the toughest conditions. Changing depths and bevels are fast, easy, single-lever operations, and you'll like the lower guard design when slicing off a narrow piece because it does not snag. If we had to name a down side, the saw is a bit heavy, but that's a negligible detail in a piece of machinery like this.--Kris Jensen-Van Heste

From the Manufacturer

With innovations in visibility, snag-reduction, bevel capacity, and even storage, this 7-1/4-inch wormdrive construction saw from Bosch is one smooth operator. A 15 amp motor and a wormdrive gear train mean ultimate durability and maximum tool life. Bosch's inventive Direct Connect Cord System lets you plug the extension cord directly into the saw for convenient tool storage. A left blade design offers better visibility, and a rear-handle means straighter, faster cuts. An anti-snag lower guard reduces hang-ups when making narrow cutoffs. The saw also features a built-in saw hook, 50-degree bevel capacity with a positive stop at 45 degrees, and a magnesium waffle-design footplate for greater strength and stability.

FEATURES

• Plug extension cord directly into the tool for easy storage and fewer hang-ups
• 50-degree bevel capacity for a wide variety of bevel cuts
• Rear handle design for more power and straighter cuts
• Magnesium body and guards for durability
• Easy serviceable brushes for convenient maintenance
• Wormdrive gear train and all ball bearing motor for longer tool life

SPECIFICATIONS

• Model Number 1677MD
• Amperage 15
• No Load RPM 4,400
• Blade Diameter 7-1/4?
• Arbor Size Diamond Arbor
• Depth of Cut at 90 Deg. 2-3/8?
• Depth of Cut at 50 Deg. 1-13/16?
• Depth of Cut at 45 Deg. 1-15/16?
• Weight (lbs.) 14
• Engineering Number 06016771AA
• Voltage 120V
• Bevel 50 degrees

Product Details

• Product Dimensions: 18.5 x 8 x 7 inches
• Shipping Weight: 16.6 pounds (View shipping rates and policies)
• Shipping: This item is also available for shipping to select countries outside the U.S.
• Shipping Advisory: This item must be shipped separately from other items in your order. Additional shipping charges will not apply.
• ASIN: B0002WRH4S
• Item model number: 1677MD
• Average Customer Review: 4.6 out of 5 stars  See all reviews (25 customer reviews)
• Amazon Best Sellers Rank: #36,493 in Home Improvement (See Top 100 in Home Improvement)
  • #67 in Home Improvement > Power & Hand Tools > Power Tools > Saws > Circular Saws

Customer Reviews

Most Helpful Customer Reviews

32 of 32 people found the following review helpful:

5.0 out of 5 stars Skil wormdrive with features, December 1, 2004

By 

Douglas S. Gulick "dgulick" (Littleton, CO USA) - See all my reviews
(REAL NAME)   

This review is from: Bosch 1677MD 15 Amp 7-1/4-Inch Wormdrive Construction Saw with Direct Connect (Tools & Home Improvement)

This is the Skil Magnesium Wormdrive Saw in blue (Bosch owns Skil). Framers in my area swear by the durability and power of the Skil wormdrive saw (though not the Skil brand). This saw offers some features over the Skil version though, there is a framing hook that flips out so you can hook it on a rafter or on your ladder, the blade gaurd has a lip that will retract it while making bevel and miter cuts, the base plate is also very strong magnesium (I bought this saw because my old saws base plate was no longer flat causing much more frequent kicks and blade pinches) and it uses an extension cord that plugs into the base. I like wormdrives/hypoid because the blade is on the left so it is easily visible over typical sidewinders saws. The saw is heavier compared to typical sidewinders, though with the magnesium cover and base plate, it is lighter than the Makita hypoid. Overall I like this saw, it has lots of power which is nice when doing a 20' rip. One thing about this saw, you have to check and (I presume) change oil in it! I have yet to do this, I don't even know how often I'm supposed to do this, but I have to assume that being able to replace the oil would offer longer tool life, though I've only had the saw for ~6 months, so can't speak for the tools longevity, though I know people who've had the Skil wormdrive for years.

28 of 28 people found the following review helpful:

4.0 out of 5 stars It's a beast, October 31, 2006

By 

walter - See all my reviews

This review is from: Bosch 1677MD 15 Amp 7-1/4-Inch Wormdrive Construction Saw with Direct Connect (Tools & Home Improvement)

Received my saw a few days ago and have put it to considerable use. It's powerful, the guard retracts well, the weight is not really a problem. The thing that finally got me to buy it was a review by Larry Haun who says it's the best saw he's ever used. The baseplate is well made, a substantial improvement over the Skils. The integrated skyhook is key. You've seen the reviews and praise: I agree with most of them, but here are a couple of comments from the field. First, and most puzzling, the cord adapter will barely accept a repair plug. It's simply too small and the plastic housing spreads apart when it's pushed in. I've tried various repair plugs, but they're all pretty big. Nearly all of our cords have big plugs on them, and it's hard to understand that they wouldn't factor this in, however it's not the end of the world. That said, the direct connect feature is great and was an important factor in my purchasing decision. My advice to users is to throw away the included thin kerf blade immediately. Thin kerf blades are dangerous and perform extremely poorly. They bind in the cut much more readily than the older type and can cause a nasty kickback. This mule kicked back at me and got my full attention. One kickback ruined that toy blade. A note to you engineers out there: stop fixing things that ain't broke. Saw blades used to be thicker and I liked them that way.
The visibility of the cut when the saw's leaned over to 45 degrees is pretty poor. The 45 degree stop is weak and does not stop it firmly at 45 which means that if I want a true 45 degree cut, I have to check the angle against the indicator. There goes the whole point of the 45 stop. Also, when the blade is set to full depth and the saw is leaned over to 45, the baseplate interferes with the guard retractor handle. I can't remember if the old Skils do this, but that's a poor design. Finally this saw needs to come with a case.
All complaints factored in, I love this saw and would buy it again.

44 of 49 people found the following review helpful:

2.0 out of 5 stars BEWARE - Out of Square, July 11, 2005

By 

J. Knutson "Montana wood bender" (NW Montana) - See all my reviews
(REAL NAME)   

This review is from: Bosch 1677MD 15 Amp 7-1/4-Inch Wormdrive Construction Saw with Direct Connect (Tools & Home Improvement)

I am a professional carpenter and I use this tool every day. It is considerably lighter than the standard Skil wormdrive and the deck is substantially more durable than the Skil MAG 777. A great saw with one major exception. I have seen several that come out of the box with the outside edge of the deck out of parallel to the blade. This problem makes it impossible to use a BCI cut guide or to simply hold the edge of the saw to a speed square for quick, precision cuts. If you buy one, take your framing square to the store with you and make sure that the blade and the edge of the deck are on the same plane. My depth adjustment also binds but I have experienced the same problem with almost every Skil wormdrive I have used. Its annoying but doesn't affect the functionality of the saw