Qty:1

Have one to sell? Sell on Amazon

Image Unavailable

Image not available for
Color:
  • Boston Gear HL152Y-G Bevel Gear, 2:1 Ratio, 1.000" Bore, 12 Pitch, 36 Teeth, 20 Degree Pressure Angle, Straight Bevel, Keyway, Steel with Case-Hardened Teeth
  • Sorry, this item is not available in
  • Image not available
  • To view this video download Flash Player
      

Boston Gear HL152Y-G Bevel Gear, 2:1 Ratio, 1.000" Bore, 12 Pitch, 36 Teeth, 20 Degree Pressure Angle, Straight Bevel, Keyway, Steel with Case-Hardened Teeth


Price: $101.90 & FREE Shipping. Details
Only 2 left in stock (more on the way).
Ships from and sold by Amazon.com.

Specifications for this item
Brand Name Boston Gear
Part Number HL152YG
UPC 781711118740
Material Type Steel
Bore Diameter 1.000  inches
Hub Diameter 2.120  inches
Hub Projection 0.880  inches
Pitch 12;pitch
Number of Teeth 36
EAN 0781711118740
Number of Items 1
Outside Diameter 1.275  inches
UNSPSC Code 31171708

This Boston Gear HL152Y-G bevel gear has a straight bevel, a 12 diametral p... Read full product description



Product Features

  • 36 teeth for use with HL152Y-P mating bevel gear in 2:1 gear ratio applications
  • Straight bevel 90 degree mesh transmits mechanical power between perpendicular shafts
  • Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles
  • Low carbon steel (0.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion
  • Case-hardened teeth for applications where hardness and strength are needed to transmit torque and motion

Product Details


Product Description

This Boston Gear HL152Y-G bevel gear has a straight bevel, a 12 diametral pitch, 36 case-hardened steel teeth, and a keyway to transmit torque between perpendicular shafts to provide rotational power to another part of a motorized system. This bevel gear is intended for use with an HL152Y-P bevel pinion gear for applications requiring a 2:1 gear ratio. It has a keyway and setscrew for use with a 1.000" diameter keyed shaft (not included), is made of low carbon steel (0.2 percent carbon), and has case-hardened teeth for applications where hardness and strength are needed to transmit torque and motion. The 20 degree pressure angle provides a lower contact ratio between gears than a smaller pressure angle, resulting in higher load capacity. This gear is used only with its mating pinion gear because bevel gears can mesh only with gears that have the same pressure angle, spiral angle, and diametral pitch (that is, the number of teeth per inch). This Boston Gear bevel gear is suitable for use in a variety of commercial and industrial applications, such as construction equipment, aeronautics, conveyors, and manufacturing equipment, among others.

Bevel gears have a blunt-end cone shape with teeth along the cone face and are used for transmitting torque and motion between perpendicular rotating shafts. A bevel gear's pressure angle, spiral angle, diametral pitch (also called DP or pitch), and its material are important factors to consider. A bevel gear is part of a set of two gears, and the gear ratio for the set is determined by the number of teeth on each gear. Gears come in several types for use in different power transmission configurations and for different applications, including spur gears (for rotating shafts parallel to each other), change gears (to increase or decrease torque and speed), helical gears (for high rates of rotational speed), internal gears (where one gear is nested inside the other), rack and pinion gears (for turning rotational motion into linear motion), and worm gears (for perpendicular shafts in tight spaces and quiet operation). Gears are suitable for use in the agriculture, automotive, construction, mining, and packaging industries, and can be found in a variety of machines, including bicycles, automobiles, and elevators, among others.

Boston Gear manufactures gears, gear drives, bearings, valves, shaft collars, couplings, and other power and fluid transmission components. The company, founded in 1877, is headquartered in Charlotte, NC, and meets International Organization for Standardization (ISO) standard 9001:2008 standard.


Customer Questions & Answers

Customer Reviews

There are no customer reviews yet.
5 star
4 star
3 star
2 star
1 star
Share your thoughts with other customers