Customer Reviews

Brabantia 385742 Wall Mounting Ironing Table Holder, Black

5 star:		(19)
4 star:		(5)
3 star:		(2)
2 star:		(1)
1 star:		(0)

 

 

this holds my rowenta ironing board and iron and is mounted on the laundry closet's door. this one's quite a toughie as it holds quite a lot of weight and keeps everything in order. the gaps on either side makes room for the long cord. the hardware that comes with it didn't seem like it would hold the weight very well but after mounting it on a wood door, it's not going anywhere. but if you must mount it on a drywall, use either a molly or a toggle bolt to mount it in place as the hardware that comes with it seems like it would only work on wood.

I have a Rowenta iron and a Seymour board. My previous Iron broke when it was knocked off of the ironing board, the usual place where it was kept. Because of the price of the Rowenta iron, I decided to invest in a safer place to store it. Receiving this unit, I followed the included instructions to insert the board hooks, and mount to a 3/8" sheetrock wall. It is only held by two screws with simple dry-wall anchors. I was not impressed with the included hardware, and used my own anchors and screws, which hold the unit much better. The actual unit however is very well designed, and holds the iron, iron cord, and board very well. Freed up a large amount of space since the board was always left open due to lack of storage options.

I am using this product just to store the iron. I wrap the cord around the ironing board hanger. I like the fact that I can put the iron away hot and it doesn't hurt the rubber heat proof backing.

Good product. This easily holds my Rowenta iron which is 5" wide. My previous iron holder by Rubber Maid was too narrow for the Rowenta, but this one has plenty of space. The metal arms are curved to enclose the iron body (unlike the picture)and there is no chance of it falling out. I don't use the hook for the ironing board, but use it to hang the cord instead.

I have a Rowenta Iron and I have had a hard time finding a wall mount ironing holder, but now the search is over. This is a great iron wall mount, it fits the Rowenta with no problem at all and it has the hooks to hold your iron at the bottom. The only advise I would give some one who wants to get it, is that it comes with two screws for put the mount up. But if you notice the bar that snaps on the back of the wall mount has a hole for a smaller screw, I would use a smaller screw to attach that bar to the wall then snap the wall mount in place and then screw the other bottom screws in place just for better support. But in all this is a great wall mount for Rowenta Irons of any other large Irons out there.

Product (Does the item do what it says) = A
Build (Material it is made out of) = A
Assembly (Putting it together) = A

Your Friendly Neighborhood Consumer
BK_Shark

Sturdy and worth the price. Has a heavier plastic, quality feel to it. Product looks great on the wall in my sewing room.
Easy to install. Just the usual pain installing on drywall. I have one screw into a stud and an anchor behind the other. Both screw holes are elongated to allow for leveling adjustment. One is vertically elongated and one is horizontal. I installed it at a height where the bottom legs of the ironing board hit the baseboard when it is hanging. The holder keeps the top legs off the wall very nicely. So, no marks on the wall.
My ironing board has T-shaped legs with a diagonal brace at the bottom. Fits just fine.

Love this iron & ironing board holder. Made very well. Hung it on the back of my laundry room door and this gave me much more space in that room!

This thing looks great, seems sturdy. Holds up my heavy "Rowenta 8080 Pro Iron" and my heavy "The Board C30 ironing Board"

The only issue is that the table holder hangs about 4 inches lower than it needs to meaning you have to mount the iron higher to keep the board from hitting the floor. I cut the top of the table holder off and rebent it, to raise the table up. That took about a half hour. Much better since I have this hanging on the back of a door.

Anything that helps me organize is fabulous. My laundry room is smaller than I'm used to and there is no where to leave the ironing board up. Having it perched again the wall was less than ideal; this wall mounting ironing table holder is really easy to use and install. It took me awhile to find one that I like especially in regards to the reviews. This one is sturdy and I'm very pleased with it. I know it's a good choice because it's attached to the laundry room door and my children are in and out of there, and no one complains. It's a true test of how good it is! I also bought the Spectrum 33300 Mop And Broom Organizer at the same time and I'm really pleased at how the organization in the laundry room is turning out.

After a thorough search on the Internet, my wife and I decided on this product. We were looking for a holder to mount on a wall in our pantry. Some of the holders that we looked at were too large and others too flimsy. This iron and ironing board holder is very sturdy, and with care should give many years of service.