SEPTLS262IDPAL - IDPAL Labeling Tools

by Brady

Product Details

• Item Weight: 1.2 pounds
• Shipping Weight: 1.2 pounds
• ASIN: B000KKWQDO
• Average Customer Review: 2.0 out of 5 stars  See all reviews (3 customer reviews)
• Amazon Best Sellers Rank: #100,881 in Electronics (See Top 100 in Electronics)
• Date first available at Amazon.com: November 19, 2003

Product Description

IDPAL Labeling Tools

Customer Reviews

Most Helpful Customer Reviews

4 of 4 people found the following review helpful:

4.0 out of 5 stars Brady ID Pal, April 29, 2007

By 

Max King (Prescott Valley Arizona United States) - See all my reviews

This is a very good unit for the price. I have owned and used 2 of them for several years and have used them in some very bad environments. Battery life is excellent, the only issue I have is that after awhile, I had to insert a piece of cardboard between the cartridge and printer frame, at the top, to keep it printing right. There are several other electricians in my department that also had this same difficulty. With the cardboard spacer in, the problem went away. Very tough and shock resistant. I would highly recommend this to anyone making a lot of labels for marking wiring. It is better than the high end Brady labelers in my opinion.

1 of 1 people found the following review helpful:

1.0 out of 5 stars Buy the Dymo Rhinopro 5000 instead - DO NOT waste your money on the ID Pal, May 8, 2009

By 

Robert L. Russell (Colfax WA. United States) - See all my reviews
(REAL NAME)   

Buy the Dymo Rhinopro 5000 instead - DO NOT waste your money on the ID Pal

I bought this 13 months ago for all my home project wire labeling needs. I am very easy on all the equipment I buy. This label maker turned out to be a waste of money. It is very light duty. The label maker is poorly constructed... The cartridges require a lot of force to insert and remove and if a small amount of label tape is sticking out of the cartridge when you are inserting or removing the cartridge you can damage the cartridge so the cartridge will not feed correctly.

My ID Pal stopped feeding the tape out of the cartridge when I would try to print. I would just hear the whir of the motor and the small display would say "printing" but the label was not being printed. I finally took the case apart and I found the cheap nylon drive gear on the motor was split and spinning on the motor drive shaft. I emailed Brady and here is their reply:


========================================================

" Bob ,
Per your email request
Unfortunately we do not have replacement gears for this printer.
The cost to service, repair costs is more then the value of a new printer.
Our labor cost is $100.00 per hour a new printer is $99.00, reason being
we have no need to inventory parts. The printer comes with a standard 1 year
warranty replacement"

========================================================

So, don't waste your money on this label maker buy the Dymo Rhino Pro 5000. My company has several of the Dymo Rhino Pro 5000s and they are awesome label makers and you can buy them here on Amazon for same price as this Brady ID Pal piece of junk. The 5000 will even make heat shrink labels too. TIP: I use vinyl label tape to permanently label my wires P/N 18443, 18444 and 18445

3 of 4 people found the following review helpful:

1.0 out of 5 stars Buy the Dymo Rhinopro 5000 instead - DO NOT waste your money on the ID Pal, May 8, 2009

By 

Robert L. Russell (Colfax WA. United States) - See all my reviews
(REAL NAME)   

This review is from: SEPTLS262IDPAL - IDPAL Labeling Tools (Personal Computers)

Buy the Dymo Rhinopro 5000 instead - DO NOT waste your money on the ID Pal

I bought this 13 months ago for all my home project wire labeling needs. I am very easy on all the equipment I buy. This label maker turned out to be a waste of money. It is very light duty. The label maker is poorly constructed... The cartridges require a lot of force to insert and remove and if a small amount of label tape is sticking out of the cartridge when you are inserting or removing the cartridge you can damage the cartridge so the cartridge will not feed correctly.

My ID Pal stopped feeding the tape out of the cartridge when I would try to print. I would just hear the whir of the motor and the small display would say "printing" but the label was not being printed. I finally took the case apart and I found the cheap nylon drive gear on the motor was split and spinning on the motor drive shaft. I emailed Brady and here is their reply:


========================================================

" Bob ,
Per your email request
Unfortunately we do not have replacement gears for this printer.
The cost to service, repair costs is more then the value of a new printer.
Our labor cost is $100.00 per hour a new printer is $99.00, reason being
we have no need to inventory parts. The printer comes with a standard 1 year
warranty replacement"

========================================================

So, don't waste your money on this label maker buy the Dymo Rhino Pro 5000. My company has several of the Dymo Rhino Pro 5000s and they are awesome label makers and you can buy them here on Amazon for same price as this Brady ID Pal piece of junk. The 5000 will even make heat shrink labels too. TIP: I use vinyl label tape to permanently label my wires P/N 18443, 18444 and 18445