This is a LED Clip Lamp foraquarium lighting with 3 MODE light effects. By touching the switch, it can be changed among white, blue, white-blue light and light off. Except for aquarium lighting¡£ Features:
-Can be used for aquarium lighting and daily energy-saving lighting
-A good decoration for the aquarium tank.
-Energy-saving LED Clip Lamp with 3 working Mode.
-48 LED light beads: 40 White and 8 Blue
-High Brightness of white light and beautiful blue light effects
-3 Modes: Blue Light only, White Light only, or Blue+White Light.
-Flexible lamp arm: can be rotated at any angle to put the light where you need.
-Suitable for the tank whose length is 30 to 50 cm
-Safe to use: powered by DV 15 through a power adaptor
-Wide input range of 110-220V
-Rotate the two screws according to the width of the tank to fix the lamp Specification:
-Power consumption: 3W
-Recommended Tank Size: 30~50cm
-Input voltage: AC 110-240V
-Output voltage: DC15V
-Power Cord length: 1.2M
-Applicable tank thickness¨Q 8MM/0.32inch
-Lifetime of the clip lamp: 9000 hrs NOTE:
(1) Make sure that the power adapter is dry and ventilated. It's forbidden to use the power adapter when it's wet. Keep the LED clip lamp far away from water. Once it gets wet, stop using it. The clip lamp cannot be used until t it is dry inside completely.
(2) When the power adapter is connected to the electricity, make sure there are no other objects within 2 centimeters of the touch switch so as to avoid error detection of the touching module, which might incorrectly turn the lights on/off.