Customer Reviews

Cables Unlimited USB-2110 USB 2.0 to IDE and SATA Adapter Cable with Power

5 star:		(41)
4 star:		(15)
3 star:		(5)
2 star:		(1)
1 star:		(6)

 

 

First of all, i'm an I/T geek and i've used several of these adapters. This one works well but has a couple flaws:

CON's:
1) It comes with no instructions or spec's, which are necessary because of #2 ...
2) This device will not work if you connect it to a laptop running on battery power. I connected this device to my laptop's USB port. All three SATA drives were recognized but failed to be accessed until my I/T "spider-sense" tingled & I connected my laptop's A/C adapter. Now all of the drives are accessible.

Most users are not professional I/T geeks and would not be aware of this- they'd erroneously think the adapter was defective and likely return it.

PRO's:
So, as long as you connect this device to a desktop or laptop on A/C power, it'll work fine. One thing i particularly liked is the SATA power adapter cable is short, sturdy, and is shaped at a right angle to "idiot proof" it from naive users who would otherwise yank it straight out by the (fragile) wires and not by the end piece.

I give it 4 stars.

I have two of these cable adapter units. One for my office and one for my truck. Don't leave home without it as you will inevitably run into a situation where you need it to fix one of your customer's computers.

Very handy and universal. I like this better than any other quick adapter I've used. Only once has it not worked with a hard drive. But that was a bizarre situation with a low RPM hard drive. I had to find a special PC to make data recovery with that hard drive work.

Excellent product.

I have three IDE drives to try this on.
The Seagate 160G, never could get it to work.
Maxtor 160G, works every time.
Western Digital 120G finally got to work after setting drive jumper to Master with slave. Would not work when set to Master standalone.
Didn't try the ESATA.
Manual is the typical chinese translated to english type and doesn't have much in it.
Question you need to ask yourself if you're thinking of buying this is, do you feel lucky?

Worked fine to transfer all data from the hard drive before sending my laptop in for repairs. I didn't need to go through driver installation procedures on the enclosed disk, just plugged it in and it was ready to go.

I have used this at least twice since getting it, maybe more. Although I haven't used it yet with an SATA hard drive, it does exactly what it says it will do with a regular (IDE) drive. I have had to get some information from an old computer and put it on a new one and that worked really well. I work in the computer/IT field at a small hospital so sometimes I have to migrate data from one computer to a new one and this allows me to do it without hassles. Here is a link to the amazon page for this product: USB 2.0 To IDE & Sata Adapter Cable With Power

I bought this to transfer data from my broken PC to my new Vista PC. The old hard drive would not directly connect to the new connections on my new PC. So, I got this product. The instructions were not the best, but the good thing is, I didn't need them. I just plugged it up to my old hard drive, then plug it into my new PC's USB port. Worked instantly. I could drag and drop files as I liked. Great product and will use again for backup purposes.

I used this product to recover files from a reformatted hard drive. I was able to connect the equipment easily. Product worked great! Thanks.

I use it with my laptop to access external IDE drives.
Flawless installation, good access speed.
I have not tested SATA yet.
Power supply is a little bulky, similar to a laptop's.

Really think the product would have been what I was looking for except it did not include drivers and when I tried to contact the supplier they had gone out of business

I maintain computers for a living and, like it or not, drives fail. This device makes recovering data for those who forget to perform regular backups very easy and convenient.