The Camco 57305 Olympian RV 5500 Stainless Steel RV Grill is a unique, high-quality grill designed to be used while attached to your RV, or as a standalone outdoor grill with its included mounting bracket. It is constructed of stainless steel and is compatible with either standard or disposable propane cylinders via a low-pressure quick-connect propane outlet. Additional features include: minimal assembly, a cast iron smoker plate and a one-year limited warranty.
The Perfect Grilling Option for Your RV
Suitable for use both for RVs and in other outdoor situations, the Olympian RV 5500 is a high-quality lightweight stainless steel barbecue that is designed to increase the flavor of cooked food without causing dangerous flare-ups that you don't want around your vehicle. The unit is constructed of durable and easy-to-clean stainless steel and comes with a versatile mounting bracket which allows for use along the side of your RV or to use as a stand. Its patented smoker plate is designed to offer the fullest flavor while minimizing the chance of flare-ups by vaporizing grease. Add to this quick and easy assembly and compatibility with both standard commercial or disposable LP cylinders and you have the perfect grilling option for your RV.
Multi-Purpose Mounting Bracket
Use with Your RV or Trailer
If the RV or trailer has a preinstalled mounting rail, the provided mounting bracket can be used to hang the grill from the side of the RV or trailer. The mounting bracket can be attached by holding it at a 45-degree angle over the mounting rail and sliding it onto the aluminum mounting rail and then slowly lowering towards the trailer or RV. The horizontal mount channel on the side of the bottom housing has small tabs that will lock into the grooves on the support arms. Slide the grill to the desired location and then allow the tabs to lock in place. Make sure the grill is square on both support arms.
General Outside Use
The mounting bracket doubles as a table stand if you want to use the grill away from the RV or trailer. Set the mounting bracket on the table or other flat surface with the support arms pointing up. Position the grill with the back toward the springs on the mounting bracket and slide the support arms into the vertical mount channels on the side of the grill. The mounting bracket has leveling rubber bumpers for balancing or leveling the grill.
Standard or Disposable Propane Cylinders
Your new grill is designed to operate with any RV or trailer equipped with a low-pressure quick-connect propane outlet. When you receive your grill it will be factory equipped with the proper propane gas quick-connect and hose assembly to connect to your RV or trailer. If the RV or trailer does not have a low-pressure quick-connect propane outlet, you may purchase an accessory hose that will connect your grill to a 5 lb or 20 LB propane cylinder or to a 1 LB throwaway cylinder. There are several other options to use your RV or trailer's propane if you are not already equipped.
- Attaches directly to mounting rail of your RV or trailer
- Mounting bracket allows for use away from your vehicle
- Minimal assembly required
- Utilizes either standard or disposable propane cylinders via a low-pressure, quick-connect propane outlet
- Made of durable and easy-to-maintain stainless steel
- One-year limited warranty
What's in the Box
- A nearly fully assembled grill
- Burner assembly
- Control valve assembly
- Mounting bracket
- Cooking grate
- Cast iron smoker plate
- Grease tray
- All necessary hardware
One Year Limited Warranty
The manufacturer extends a (1) year warranty from the date of purchase against manufacturing defects in material and workmanship to the original purchaser of this product if used under normal conditions of operations. If this product fails to operate because of a manufacturing defect, the defective part will be repaired or replaced on written consent of Camco Mfg., Inc. This warranty covers only the repair or replacement of parts and does not cover labor or shipping costs.
About Camco Manufacturing
Camco started in 1966 with one employee and one product. Today, over 40 years later, we have more than 350 employees, over 3,000 products and five manufacturing facilities to better serve our customers’ needs. Our home office is in Greensboro, North Carolina. We also have locations in Elkhart, Indiana; Portland, Oregon; Leominster, Massachusetts and our newest facility in Beilun, China.
Competitive pricing, superior service, quality products and customer satisfaction are the foundations upon which Camco operates. Our friendly, knowledgeable customer service staff stands ready to assist our customers with any questions. At Camco, we take pride in meeting the ever changing demands of a challenging marketplace while serving you, our most valuable asset.