Campbell Hausfeld HV2500 58 CFM Fine Finish HVLP Paint Sprayer

by Campbell Hausfeld

Product Description

From the Manufacturer

Delivering a perfectly fine finish with low overspray, Campbell Hausfeld's HV2500 sprayer is ideal for painting or staining cabinets, trim, furniture, machinery and equipment. The unit sprays light, medium, and heavy-stains, varnishes, oil-based paint, and latex. With 58 CFM and 5 PSI, the sprayer offers just the right output for professional results. A 2-stage turbine motor facilitates a transfer efficiency of 85 percent. The purchase includes an HVLP spray gun, 25-foot hose, 2 needle/nozzle sets, a wrench, a viscosity stick, strainers, and a cleaning brush. Best of all, weighing just 26 pounds, this fine finisher won't wear out your arm-ensuring that you execute flawless detail work.

Product Description

Includes 2-Turbine High Volume / Low Pressure Painter - HV2500, 25-ft Heavy Duty Air Hose, Semi-Professional Spray Gun, (1) Wrench, (1) Cleaning Brush, (1) Viscosity Stick, (2) Disposable Stainer Cones, (1) Needle/Nozzle

Product Details

• Product Dimensions: 12.5 x 22.5 x 12.5 inches ; 26 pounds
• Shipping Weight: 28.6 pounds (View shipping rates and policies)
• Shipping: This item can only be shipped to the 48 contiguous states. We regret it cannot be shipped to APO/FPO, Hawaii, Alaska, or Puerto Rico.
• Shipping Advisory: This item must be shipped separately from other items in your order. Additional shipping charges will not apply.
• ASIN: B0002FT8RO
• California residents: Click here for Proposition 65 warning.
• Item model number: HV2500
• Average Customer Review: 4.0 out of 5 stars  See all reviews (20 customer reviews)
• Amazon Best Sellers Rank: #62,785 in Home Improvement (See Top 100 in Home Improvement)
  • #12 in Home Improvement > Air Tools > Power Sprayers

Customer Reviews

Most Helpful Customer Reviews

38 of 39 people found the following review helpful:

3.0 out of 5 stars Hold out for a better HVLP, June 14, 2008

By 

M. Conger "DIY Mark" (Dana Point, CA United States) - See all my reviews
(REAL NAME)   

Amazon Verified Purchase

This review is from: Campbell Hausfeld HV2500 58 CFM Fine Finish HVLP Paint Sprayer (Tools & Home Improvement)

I've had this unit for a couple of years now...and in short it's priced fairly. Not too great but not too bad. It got me started with HVLP. It just does not have enough power for shooting any thick (even kinda thick) finish. If you just want to shoot waterborne poly it works fine.

I wanted to shoot paint and oil based poly. For paint, forget it. Even with the heavy needle it just shoots splatter. For oil based poly it can't shoot a smooth even finish. With the heavy needle in it you get orange peel.

It was a good intro machine for me, but I ended up going for the top end
Accuspray on the second go round. Triple the price but you get professional results (why waste your time spraying if you get sub-par results?) and 3M's PPS which makes clean up a breeze. You know it's hard to justify the price for an expensive unit but think how many hours you have into your project. Why risk an average finish on it.

37 of 38 people found the following review helpful:

4.0 out of 5 stars Great bang for the buck!, January 28, 2006

By 

C. Goldstein - See all my reviews
(REAL NAME)   

This review is from: Campbell Hausfeld HV2500 58 CFM Fine Finish HVLP Paint Sprayer (Tools & Home Improvement)

I have tried HVLP conversion guns in the past...Well, cheapy ones and was left dissapointed. A bathroom project that consisted of spraying a significant amount of Urethane and a bathtub with Acrylic polyurethane was on my list so I needed an HVLP and decided I wanted a turbine. Not wanting to invest alot of money I did a tremendous amount of research and decided on the HV2500. Although it is only a 2 stage unit I was satisfied with the specs and decided to give it a try. This unit comes with a fine and general fluid set. For an affordable $15 I bought a thick coatings fluid set should I attempt latex.

I used the Fine fluid set for the clear urethane which came out fantastic with great atomization and no runs. For the white Acrylic Polyurethane on the bathtub I used the general fluid set with satisfactory results. I got some orange peel but I blame that more on lack of experience than I do the HVLP itself. I need more practice spraying and getting the settings just right. The gun is reasonably easy to clean and should last a while so long as your not using this commercially. The unit comes with a 25' hose which is great to afford you the ability to keep the unit far away from the spraying vacinity and since they sound like vacuum cleaners the farther away the noise the better.

Overall if your looking for a decent HVLP with good parts availability at a really good price, give the HV2500 a try. It may suprise you.

20 of 20 people found the following review helpful:

5.0 out of 5 stars Great HVLP Sprayer, June 21, 2006

By 

Mark Novak "Mark N" (Seattle WA) - See all my reviews
(REAL NAME)   

This review is from: Campbell Hausfeld HV2500 58 CFM Fine Finish HVLP Paint Sprayer (Tools & Home Improvement)

Bought the CH HV2500 to paint all the cabinets in my house. Had never used a sprayer before. Took me six days to prepare the cabinets (remove hardware, wash, sand, prime, tape off face etc), and only about three hours to spray the whole job, 62 cabinets. I sprayed acrylic latex. The hardest part was in getting this thick paint thinned down to the correct viscosity. I also used Floetrol to help the latex lay flat. Once I discovered the correct mix, the CH HV2500 put on a mirror-like finish. I am very happy with this product.