- Coupler for connecting two pipes with the same diameter in a straight run
- Accepts nylon and polyurethane tube fittings
- Made of acetal copolymer plastic for low moisture absorption and high tensile and flexural strength
- Working pressure of up to 150 psi
- Imperial unit measurements for industry consistency
0 items added
To add items, choose from the table below
Celcon Push-to-Connect Tube Fitting, Acetal Copolymer, Straight Coupler, Tube OD
|Price:||$3.83 - $7.40|
|Maximum Pressure||150 PSI|
|System of Measurement||Inch|
|Connector Type||Tube OD|
This Celcon straight coupler fitting is made of acetal copolymer and has tu... See more product details
Customers Who Viewed This Item Also Viewed
This Celcon straight coupler fitting is made of acetal copolymer and has tube connectors. This coupler fitting connects two pipes with the same diameter going in the same direction to extend a straight run. It is a push-to-connect fitting that accepts the insertion of nylon, soft nylon and polyurethane tube fittings. It is made of acetal copolymer plastic, which has low moisture absorption, high tensile and flexural strength, and is hard and fatigue resistant. The working pressure for this fitting is up to 150 pounds per square inch (psi), and it uses imperial unit measurements for industry consistency and interchangeability.
Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. Push-to-connect compression fittings do not require tools or sealants, and are useful in installations where a heat source, such as a soldering torch, is prohibited. When purchasing pipe fittings, consider the application, as this will affect material type, shape, size, and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
Top Customer Reviews
Also, make sure the tube is cut as square as possible to allow it to seat properly in the fitting. Any jagged edges or angle cut may create a weak joint and cause a leak.
Used the coupling on my Kenmore Fridge water/ice maker line.
Home Depot suggested I do some 5 piece fitting that was metal and plastic with a screwe on compression mechanism. I couldn't for the life of me get it to work without leaking. So after a little research I discovered this. I thought it couldn't possibly work. Just cut the leaking section and push each end into this? No way. Two days later (thanks to prime shipping) I recieved what I figured would be a waste of money. About 2 minutes after opening the package, the leak was fixed. You literally make sure the ends of your hose are cut straight (I had already done this) and push each end into this little "doohicky". It fits snugly and you cannot pull it back out! There is a way to remove it, but I mean it stays put on its own. Turn the water on, and enjoy water and ice once again directly from the filtered fridgerator.
I waited about 2 months before I posted this review. I checked the fitting intermittently over the past 2 months to be sure it didn't have any leaks. No leaks. If it ever fails, I will post back here. But for now, this absolutely works and I fully recommend it if you have the need to repair a water feed to a fridge!
Most Recent Customer Reviews
Worked great to repair the hose on my LG fridge. Repairing this through someone else would have cost me a lot more.Published 1 month ago by Twerkin Merkin
Great product. Arrived fast. Does exactly what its been designed to do. Anyone can install this.Published 2 months ago by Ed
Worked perfect and great price. Just make sure you cut the tubing straight and push it all the way "home".Published 2 months ago by Robert D.
Great coupling for refrigerators. As advised, I made sure both ends were cut straight and I also added a light coat of PVC cement. Read morePublished 3 months ago by Eye In Sky
purchased this connection to repair the original plastic tubing and connect it to 5/16 copper tubing. Read morePublished 4 months ago by Boilercop