Qty:1
Add to Cart

Other Sellers on Amazon
Add to Cart
$34.97
+ $2.95 shipping
Sold by: Abacus24-7
Add to Cart
$28.94
+ $9.99 shipping
Sold by: HQ Security
Have one to sell? Sell on Amazon

Image Unavailable

Image not available for
Color:
  • Cheetah Mounts APTMM2B Flush Tilt (1.3" Profile) TV Wall Mount Bracket for 32-65 inch LED, LCD and Plasma Flat Screen TVs Up To VESA 684x400 and 165lbs, Including a Twisted Veins 10' Braided High Speed with Ethernet HDMI Cable and a 6" 3-Axis Magnetic Bubble Level
  • Sorry, this item is not available in
  • Image not available
  • To view this video download Flash Player
      

Cheetah Mounts APTMM2B Flush Tilt (1.3" Profile) TV Wall Mount Bracket for 32-65 inch LED, LCD and Plasma Flat Screen TVs Up To VESA 684x400 and 165lbs, Including a Twisted Veins 10' Braided High Speed with Ethernet HDMI Cable and a 6" 3-Axis Magnetic Bubble Level

by Cheetah
| 473 answered questions

List Price: $40.99
Price: $24.69 & FREE Shipping on orders over $35. Details
You Save: $16.30 (40%)
In Stock.
Sold by CheetahMounts and Fulfilled by Amazon. Gift-wrap available.
  • Fits Essentially All 32-65" TVs up to VESA 684x400 and 165lbs
  • Flush-Tilt design is only 1.3" from wall yet still tilts for better viewing and reduced glare
  • Stronger with Less Metal GREEN design
  • Fits 16 And 24" Wooden Studs plus Masonry and allows for 3 degrees of Rotation Adjustment
  • Includes a Twisted Veins 10' Braided High Speed with Ethernet HDMI cable and a 6" 3-axis Magnetic Bubble Level
11 new from $24.69 3 used from $24.00 1 refurbished from $39.00

Frequently Bought Together

Cheetah Mounts APTMM2B Flush Tilt (1.3" Profile) TV Wall Mount Bracket for 32-65 inch LED, LCD and Plasma Flat Screen TVs Up To VESA 684x400 and 165lbs, Including a Twisted Veins 10' Braided High Speed with Ethernet HDMI Cable and a 6" 3-Axis Magnetic Bubble Level + CH Hanson 03040 Magnetic Stud Finder + VideoSecu LED LCD TV Wall Mount for most 22"-47" LCD, LED & Plasma Televisions and some models up to 55" inches - up to 88 lb VESA 400x400 mm with Full Motion Swivel Articulating Arm, 20 in Extension and Post-installation Leveling System, for Monitor Flat Panel Screen, Bonus 10 ft HDMI cable and Magnetic Bubble Leveler WP5
Price for all three: $62.27

Buy the selected items together


Special Offers and Product Promotions

  • Save 25% each on Qualifying items offered by CheetahMounts when you purchase 1 or more. Enter code X78LXY7T at checkout. Here's how (restrictions apply)
  • Amazon Free 30-Day Tech Support: This item is eligible for free tech support for 30 days from the date of delivery. Over the phone, our trained technicians can help you set up, configure, connect, and troubleshoot so you can start enjoying your new purchase. Owners of qualifying products can reach Tech Support by calling 1-800-362-5703. Learn more


Technical Details

  • Hole Pattern Coverage up to 700x400mm (27.6x15.8") Including VESA 100x100, 200x100, 200x200, 300X300, 400x400, and 600X400
  • Stronger (Dual Hook) with Less Metal GREEN Design Supports 165lbs with Less Than 6lbs of Steel
  • All Mount Pieces Are Made From 100% Cold Rolled High Grade Steel
  • Flush Position is Only 1.3" From the Wall Yet Mount Tilts Up To 15 Degrees
  • Included 10' Braided Cable Supports 1080P, 3D, Ethernet, and Audio Return conforming to Lastest HDMI 1.4 Standard

Product Details

  • Product Dimensions: 17.7 x 5.6 x 2.8 inches ; 4.4 pounds
  • Shipping Weight: 5 pounds (View shipping rates and policies)
  • Shipping: This item is also available for shipping to select countries outside the U.S.
  • ASIN: B0012S4APK
  • Item model number: APTMM2B
  • Average Customer Review: 4.3 out of 5 stars  See all reviews (5,792 customer reviews)
  • Amazon Best Sellers Rank:
  • Date first available at Amazon.com: January 18, 2008
  •  Would you like to give feedback on images?


Product Description

FITS 32-65" TVS

This mount fits essentially all 32-65" TVs sold today. Specifically, it fits TVs with mounting holes as close as 4"x4" or as wide as 27"x16" (in TV terms - VESA 100x100mm to 684x400mm).


LOW 1.3" PROFILE

The APTMM2B profile is only 1.3" for today's thinner TVs yet still tilts to improve viewing and reduce glare. Due to the low profile, some TV’s inputs are difficult to reach once mounted. If input access is an issue, Cheetah offers various arm mounts.


STRONGER WITH LESS METAL

The APTMM2B uses a "Stronger with Less Metal - Green" design, holding up to 165lbs with less than 6lbs of steel. A unique design uses thicker metal in key areas of the mount.


STANDARD SIZE PACKAGING

The APTMM2B fits Amazon's standard size package specifications, saving on shipping and CO2 emissions and helping to get you your mount quickly. The smaller box means some assembly is required.


FITS 16" OR 24" STUDS

The APTMM2B is 26" wide for 16" or 24" studs typical in US homes.


3 DEGREE ROTATION ADJUSTMENT AND COMPLIMENTARY LEVEL

The APTMM2B wall slots allow for 3 degrees of rotation adjustment and a 6" 3-axis Magnetic Bubble Level ensures level mounting.


10' HIGH SPEED WITH ETHERNET HDMI CABLE

A Twisted Veins 10’ High Speed with Ethernet HDMI cable is included, featuring a braided jacket and capable of 3D 1080P signals.


INCLUDES ALL NECESSARY MOUNTING HARDWARE

This mount ships with hardware for both wall and TV mounting.


LIFETIME 100% GUARANTEE

If ANYTHING is wrong with your mount, please contact the Manufacturer. Your mount has a lifetime guarantee.

Customer Questions & Answers

Customer Reviews

4.3 out of 5 stars
5 star
3,611
4 star
1,259
3 star
446
2 star
218
1 star
258
See all 5,792 customer reviews
Priced right, Compared to Best buy.
Amazon Customer
Super easy instructions and super quick install, even included level and HDMI cable!
Celeste S.
The mount works perfectly for our 46" TV.
LoJack

Most Helpful Customer Reviews

1,366 of 1,410 people found the following review helpful By Young on June 3, 2009
Verified Purchase
I was skeptical of this mount. Why should this be so cheap compared to other mounting kits? I ordered one (due to the price), and prepared to return it if I did not think the mount could handle the weight of the 52" LCD TV (Samsung).

Once I got it, I understood the cost. Good low-cost design and built with solid heavy duty steel.
- Two horizontal bars are load-bearing, and for proper VESA spacing, they have to be parallel and relative distance must be in the right tolerances. These are made of solid steel.
- Two vertical bars (in the wall mount) are flimsey, and that's ok. it should be solid enough make a rectangle box w/ square angles. That's it.
- Two vertical mounting (to the TV) brackets are of heavy duty metal. Making this in to two parts (not one), reduction of material, but also allows free horizontal adjustment on the TV mount.
- By doing the above, the kit is small, uses less metal (and reduce shipping and material waste).

Positives
---------
1. Good solid and heavy duty construction.

2. Good value (low-cost). Paid less than $ 25 including shipping.

3. Easy install. Took 15 min to figure out the instruction (which is not totally clear), and 10~15 min to install and ready to watch.

4. built-in level worked well during marking of mouting holes on the wall --I tested w/ my own, and was consistent.

5. Once the mounted on the wall, and bracket on TV, you could adjust horizontal TV placement on the mount, just by sliding few inches left or right, post install. I expect this to be safe and true if the wall mount is directly screwed into the wall studs. I do not expect dry-wall install without the use of the studs to handle such adjustment.

6.
Read more ›
25 Comments Was this review helpful to you? Yes No Sending feedback...
Thank you for your feedback. If this review is inappropriate, please let us know.
Sorry, we failed to record your vote. Please try again
318 of 335 people found the following review helpful By Chaz D on April 3, 2012
Verified Purchase
I rarely write reviews, but I have been installing HDTVs for over 5 years and I am constantly getting questions from people asking which wall mount they should buy. Without exception, I refer them to Amazon and Cheetah Mounts. I've used over a dozen of these mounts for installations, and other than the built-in level being NOT trustworthy, this is a great mount and should work for just about any TV in the 32-65" range. I have used this to mount anything from lighter LCD/LED displays to large heavier plasma TV's and it supports all of them just fine. I have also used other expensive wall mounts in the past and so I can provide a comparative review.

A lot of the reviews say the Cheetah mount looks cheap or flimsy. In comparison to the more expensive mounts, I would agree with that observation. However, when you understand the physics of what the wall mount is actually doing, you'll realize that a bulkier mount really isn't giving you much additional support in a fixed or tilt mount application. That's because contrary to popular opinion, the wall mount isn't really carrying the entire weight of your TV - in fact, with the exception of articulating arm mounts, it's actually not even carrying a majority of it. When the back bracket is installed across two studs (which is absolutely the way it should be done) and the bolts are firmly attached, the bracket, wallboard, and studs become tied together as one cohesive unit. This allows maximum load transfer between the wall mount and the studs, which leaves the studs bearing most of the weight. This concept applies the same whether you use a Cheetah mount or a more expensive mount.

I am not saying that the more expensive mounts that use thicker gauge steel aren't stronger than the Cheetah Mount.
Read more ›
10 Comments Was this review helpful to you? Yes No Sending feedback...
Thank you for your feedback. If this review is inappropriate, please let us know.
Sorry, we failed to record your vote. Please try again
216 of 232 people found the following review helpful By Rick on April 25, 2013
Verified Purchase
I have been using Cheetah mounts for several years now. They used to be a 5 star product, but I'm re-reviewing this product and lowering it to 1 star after they have made several changes to the product in an obvious attempt to cut manufacturing and shipping costs. After opening the package to hang my latest television, I discovered that the top and bottom rails are no longer 1 solid piece of steel. They are now two pieces that need to be bolted together in the center by 12 screws, just so they can make the box smaller. The steel itself is much thinner now and instead of a powder coat finish, they are using cheap spray paint. There used to be a bubble level attached to the top bracket, in addition to a small torpedo level in the box. The mounted bubble level is now gone, and the torpedo level has been replaced with a cheaper one too. You used to be able to adjust the tilt of the mount using thumb levers. Those thumb levers are now gone, and have been replaced with philips screws, so now you need to try to hold a screwdriver in the 3" gap between the wall and the television. Believe it or not, they even cut back on the lag bolts used to secure the mount to the wall. Now, instead of 4 large lag bolts, they now give you 2 large and 2 small. I used to be able to assemble one of these in 5 minutes; this one took 30.

What's worse is they replaced the original Cheetah mount with this piece of crap, so they could keep all the 5-star reviews they had received on the previous bracket! What they should have done is listed it as a new product, as they have completely changed every aspect of the product and certainly the quality. Very deceptive practice! I will certainly never purchase another bracket by this manufacturer. They should be ashamed of themselves.
6 Comments Was this review helpful to you? Yes No Sending feedback...
Thank you for your feedback. If this review is inappropriate, please let us know.
Sorry, we failed to record your vote. Please try again

Most Recent Customer Reviews

Search