Get a $75 Gift Card with $500 or more spent in Business, Industrial & Scientific Supplies

0 items added

To add items, choose from the table below

Image Unavailable

Image not available for
Color:
  • Cleveland 2513 Cobalt Steel Long Length Drill Bit, Gold Oxide Finish, Round Shank with Tang, 118 Degree Notched Point
  • Sorry, this item is not available in
  • Image not available
  • To view this video download Flash Player
      
Image is representative of the product family. Select individual products in the table below for more specific images and product specifications

Cleveland 2513 Cobalt Steel Long Length Drill Bit, Gold Oxide Finish, Round Shank with Tang, 118 Degree Notched Point

Available in multiple versions


Price: $19.50 - $98.40
Product Specifications
Brand Name Cleveland
Material Type Cobalt Steel
Finish Types Gold Oxide
Cutting Angle 118  Degrees
Cutting Direction Right-Hand
Drill Point 118 Degrees
Flute Type Spiral
Shank Type Round with Tang
UNSPSC Code 20121600

The Cleveland 2513 long-length, high-speed steel (HSS) conta... Read full product description


Currently showing 1-12 of 12
Size Part Number Price Quantity
   
1/2 in B003LSSNRA
In Stock (1)
$35.11
Prime Eligible
13/32" B003LSSNMA
In Stock (1)
$27.19
Prime Eligible
15/32" B003LSSNPM
In Stock (1)
$32.10
Prime Eligible
23/64" B003LSSNKM
In Stock (1)
$24.90
Prime Eligible
27/64" B003LSSNN4
In Stock (1)
$29.47
Prime Eligible
29/64" B003LSSNOI
In Stock (1)
$31.67
Prime Eligible
3/8 in B003LSSNL6
In Stock (1)
$25.55
Prime Eligible
31/64" B003LSSNQG
In Stock (1)
$34.72
Prime Eligible
5/32" B003LSSNES
In Stock (11)
$32.28
Prime Eligible
7/16" B003LSSNNO
In Stock (1)
$29.51
Prime Eligible
7/32" B003LSSNH0
In Stock (1)
$19.50
Prime Eligible
9/64" B003LSSNDY
In Stock (1)
$98.40
Prime Eligible
Currently showing 1-12 of 12
Could not load your selection

We're sorry. An error occured when we tried to load your product family table. Rest assured, we're working to resolve the problem as soon as possible. Please refresh the page.


Product Features

  • High-speed steel (HSS) containing cobalt is a good combination of toughness and hardness, for use on drilling through hard substances
  • Long-length, for extra reach and deeper holes
  • 118-degree angle, notched-point provides ease of penetration when starting holes and prevent walking
  • Gold oxide reduces grinding stress within the tool
  • Round shank with tang, for secure fit a variety of tool-holding systems

Product Details

  • Shipping Information: View shipping rates and policies
  • Domestic Shipping: Currently, item can be shipped only within the U.S. and to APO/FPO addresses. For APO/FPO shipments, please check with the manufacturer regarding warranty and support issues.
  • International Shipping: This item is not eligible for international shipping. Learn More
  • ASIN: B004P8JR2U
  • Manufacturer’s warranty can be requested from customer service. Click here to make a request to customer service.

     Would you like to give feedback on images?


Product Description

The Cleveland 2513 long-length, high-speed steel (HSS) containing cobalt drill bit has a 30-degree helix angle, with a 118-degree notched-point drill point and gold oxide surface treatment, which is designed for heavy-duty drilling applications. The shank diameter is the same as the drill size. This drill has high red hardness for extended wear life in high heat conditions.

The 2513 series performs best when drilling into stainless steel, carbon steel, and cast iron. Gold also known as straw oxide is a low-temperature heat treatment that reduces grinding stress within the tool. Spiral flutes act as a passageway for chip extraction from the hole and for coolant to enter the hole. The twist of the flutes brings chips up and away from the cutting edge. The 118-degree notched-point drill point works well for hard and tough materials. The notched point can withstand higher thrust loads and has same benefits as a split-point design. The long, also known as taper length has more reach than Jobber-length bits and allows for deeper holes. Round shanks allow use with a wide variety of tool holding systems. The round shank with tang provides a means to securely hold the drill bit in the tool holder. Made from cobalt steel which can be run at faster speeds and stays sharp longer than HSS tools, while offering resistance to heat and abrasion.

The tolerances for various aspects of the Cleveland drill bits are: drill diameter range through 1/8” +0.0000”/-0.0005”, over 1/8” to 1/4” +0.0000”/-0.0007”, over 1/4” through 1/2” +0.0000”/-0.0010”, over 1/2” to 1” +0.0000”/-0.0012”, over 1” to 2” +0.0000”/-0.0015”, over 2” to 3-1/2” +0.0000”/-0.0020”; drill overall length and flute length #80 through 1/8” +0.1250”/-0.0626”, over 1/8” to 1/2” +0.1250”/-0.1250”, over 1/2” to 1” +0.2500”/-0.1250”, over 1” to 2” +0.2500”/-0.2500”, over 2” to 3-1/2” +0.3750”/-0.3750”; drill point angle diameter range 1/16” to 1/2” included angle 118 or 135 degrees +/-5 degrees, over 1/2” to 1 1/2” included angle 118 degrees +/-3 degrees, over 1-1/2” to 3-1/2” includes angle 118 degrees +/- 2 degrees; drill lip height diameter range 1/16” to 1/8” total indicator variation 0.0020”, over 1/8” to 1/4” total indicator variation 0.0030”, over 1/4” to 1/2” total indicator variation 0.0040”, over 1/2” to 1” total indicator variation 0.0050”, over 1” to 3 1/2” total indicator variation 0.0060”.

Drill bits are cutting tools used to make holes in a range of materials. They are used in machines such as handheld portable drills, drill presses, machining centers, and lathes. Drill bits come in a variety of types and lengths. Twist drill bits are the most common type of drill bit. They are a round, twisted shaft, end-cutting tool with two or more cutting edges and two or more flutes. Long length bits (also called taper length) are twist bits that are a little longer than jobber length, allowing for deeper holes and longer reach.

Greenfield Industries manufactures tools under the brand names Cleveland, Chicago-Latrobe, Cle-Line, Vermont Tap & Die, Bassett, Putnam Tools, Geometric, Vers-O-Tool, H & G, and Acme-Fette. The company owned by Top-Eastern Group and headquartered in Seneca, SC, makes tools that meet American National Standards Institute (ANSI), National Aerospace Standard (NAS), and Deutsches Institut für Normung (DIN) standards.


Customer Questions & Answers

Customer Reviews

There are no customer reviews yet.
5 star
4 star
3 star
2 star
1 star
Share your thoughts with other customers