Customer Reviews

Clock Repairing as a Hobby: An Illustrated How-To Guide for the Beginner

5 star:		(3)
4 star:		(2)
3 star:		(3)
2 star:		(1)
1 star:		(1)

 

 

The work being reviewed here is the 1972 Edition. There have been two or three reprints of this work throughout the years but about all that has changed is the cover.

There are a couple of considerations that need to be addressed in reviewing this work. First, this is a work, as stated on the cover and in the preface, "....for the beginner." It does not take a rocket scientist to figure out that a complete course in clock repair and building can not be covered in 124 pages, and that is 124 pages of a rather small book. Secondly, this book was first published in 1972 which makes it 37 years old at the time of this review. This is okay though due to the fact that most of the clocks targeted in this book are well over 100 years old and the principles and techniques that worked in 1972 still work just as well today. Hey folks, we are not talking about a book here that teaches you to change batteries in ten dollar digital watches. Good grief, throw the bloody thing away and buy a new one (after you properly dispose of the battery of course, and not just send it to the landfill where it will add to the poison that will haunt your great, great, great grandchildren). Once again...this book is strictly for the beginner and concept and theory has not changed in well over 200 years, much less in thirty. The information here is not outdated. Now that being said:

I love this old book. I have been fascinated with clocks since I was a wee one and was the bane of my father's existence as I would dismantle every clock in the house as fast as he could replace them. The problem came in when it was found that I was unable to put them back together. I love niggle little work, fine work, and he use to take me to his office that he shared with my grandfather. It was a dental office and they use to let me practice making dentures, partials, filling pulled teeth, and repairing such. Again, the problem came when I started taking apart their expensive dental equipment (I wanted to see how it worked), and again,I was not real good at putting in back together.

Over the years I have collected old clocks; you know the kind, the wonderful old windups that you found on your grandmothers mantel. I have only one requirement when I purchase these clocks...they must NOT be in working condition! A working clock is a wonderful thing, it is like magic, but it is even more wonderful and wondrous if you know you are the one to make it so, i.e. work.

This little volume covers basic clock movement, both theory and design, and practical clock repairing. I found that the section addressing the pendulum and the various variations of particular use. The author uses simple and for the most part nontechnical language to explain the complex workings of these machines, and explains them at the level that a beginner can easily understand. Wonderfully simple schematic drawings are provided. In the section devoted to the chimes and chiming mechanisms the author has even provided the sheet music for several popular (Whittington chime as an example) sounds. This, to be quite frank, is rather unique.

I love the section devoted to practical repairing. The author has given us a complete rundown on all of the tools needed for your hobby. We also provided with a very nice explanation as to what each tool us used for and how to use it. The author has even gone into quite a bit of detail as to the work bench which (and trust me here) is quite important. The book does discuss the lathe and grinding wheels, but to be honest with you, if the repair requires machining special parts I am way over my head in this area and I simply take that part of the task to a professional.

Now most of what I have learned has been completely self-taught. The author has stressed the importance of cleaning and maintenance. I learned long, long ago that many fine old clock that do not work and have not worked for years upon years can be purchased from the unwary for the price of a few cups of coffee, taken home and given a good cleaning, which takes very little time, and resold for enough to buy whole bunches of other old "broken" clocks! I know, I am a terrible person, but you know, business is business. If this book has one weak area for the beginner or hobbyist, it is the fact that is does not put enough emphasis on cleaning or cleaning techniques. There are other books out there that cover that and of course there is the thrill of simply learning it yourself.

Is this the only book you will need to pursue this hobby? Heavens no! Will this work turn you into a master craftsman or woman overnight in the field of clock repair? Nope! Is this the best book out there for the beginner? I haven't a clue as I have not read all of them or used all of them. Did this book work for me? Yes. It has given me all the basic I needed and I have found that if I need more information I need to find "clock specific" literature on the particular piece I am working on and in many cases have to go directly to the manufacturer. Or I find that being a complete pest pays off big time. When I get in trouble I simply pester local professionals and wheedle information out of them a bit at a time.

Am I good at this hobby? Hardly, there is so much to know and learn, but I do enjoy learning it and I do enjoy fiddling with the things. It is a good thing though that I do not have to make a living working on clocks...there would be great hunger and poverty in the family if I did. Anyway, this is a good book and I do recommend it.

Don Blankenship
The Ozarks

Part of the way into Goodrich's "The Modern Clock," I realized I needed to start with a text that didn't assume the reader already works in a clock repair shop. There being several options, I decided to check a few out of the library before buying. Kelly's "Clock Repairing as a Hobby" was one of the ones that was available. It is definitely better suited to the beginner than Goodrich. It defines many of the parts and describes the workings, and also gives basic advice on how to proceed in clock repairs. I'd rate it as useful, but uneven and insufficient. Some clock parts are mentioned in the text or appear in a drawing (e.g., "cannon pinion") but are never defined. There are drawings of several escapements or striking mechanisms, but the reader is left to imagine how the parts move relative to each other based on the description in the text. For a beginner's book like this one, a drawing showing several states of the mechanism would be much more appropriate. Several basic concepts, like how the "lift" is distributed between the pallet faces and escape gear teeth, or what is meant by the "run of the lock" are never touched on at all! If I hadn't already seen an Internet-based animation of the deadbeat escapement, I wouldn't have a clue how it worked based on the description in Kelly! So I'm going to keep looking for a better book.

Book seems fine unless you are looking for a book to repair cuckoo clocks...which I was. I searched for "cuckoo clock repair" and this came up. Seems like a fine book, but is useless to me.

This was a Christmas gift for my husband whom is interested in the repair of watches and clocks. He just needed additional information on repairing clocks, and he said this was the perfect book! He was very pleased.

"Clock Repairing as a Hobby", offers a rather good, if brief, description of the basic nomenclature and operation of several types of clock movements.

The paper quality of the book is of the poorest paperback book kind.

The illustrations are simple, hand drawn sketches, and although referenced in the text, do not often appear on the same or facing page as the text referencing them. This requires much flipping through the pages to see what is being described. I found the illustrations to be of some value, although some illustrations had labeled components that were not referenced in the text, and vice-a-verse.

The relatively large section covering "Tools, Materials and Supplies" is a complete waste of space and seems to be simple "filler".

The section on "Special Repair Techniques", which is the only section addressing clock repair at all, does not contain any useful information except for a discussion of how to unwind one type of mainspring without killing yourself.

You cannot expect to repair a clock movement from the information provided in this book, but it may well enhance your interest in further study of the subject.

There is a whole genre of books written by people who know an awful lot about their subject but have no idea how to teach it, and this is one of them.
A book this size can't really be expected to teach anyone 'how to' repair a clock. But pad it out with sections on the musical notation of different chimes, and there's no hope.
If you want a light read that tells you superficaially how clocks work and a few of the things that clock repairers do to them, you might like this; or you would if it was written better. But if you actually want to take a clock to pieces yourself, put it back together and make it work, forget it. You need to Google 'British Horological Institute' and look up their 'Distance learning course'.

This book is a good introduction, and left me wanting to learn more about clock repair.

The book is well written and understandable. I'm a novice and the information is exactly what I was hoping to find.

Book is ok, print a bit small for people with bad eyes but otherwise a great book. Was disippointed to find out after the fact that the book came from the UK, took almost a month for delivery. When I complained all I got was a note from the seller saying the book had been shipped and he was sorry I hadn't recieved my book.

i am sure this book will helpful just haven't got to it yet but sure it will do the trick thank you john