- Panasonic 0.33-inch CCD sensor
- Image resolution of 512 by 492 pixels
- Video resolution of 420 TV lines
- Light sensitivity allows camera to receive at minimum illumination of 0.5 Lux
- Built-in electronic auto-iris and back-light compensation
Product Details
Would you like to update product info or give feedback on images?
|
This camera utilizes a high-end 0.33-inch Panasonic CCD (charge-coupled device) sensor, with a resolution of 512-by-492 pixels or 420 TVL (TV lines). The CCM636 includes a 3.6mm lens, has a usable illumination down to 0.5 Lux, and a better-than 46 dB S/N (signal to noise) ratio. The unit's built-in electronic auto iris control, built-in automatic backlight compensation, low-illumination function, and exposure times ranging from 1/60 to 1/100,000 of a second ensure even higher picture quality with user-definable parameters. This camera can provide a frame rate of up to 30 frames-per-second (frames per second), equivalent to a 460-NTSC analog video. Powered via a 12-volt external DC power supply (included), it can operate in temperatures from -10 to 50-degrees Celsius.
Technical Features:
About Surveillance Camera Technical Features
Lux rating is the measurement used to indicate how sensitive a camera is to light, and stands for the level of light reflected off a piece of paper by a candle from one meter away. Thus a sensitivity of three Lux would mean a camera could generate an acceptable picture of a piece-of-paper-sized object that was illuminated by the equivalent of three candles from one meter away. The lower the Lux level, the better the camera's ability to work in low-light conditions. The camera's resolution should be greater than or equal to the resolution supported by the system's recorder or monitor. The S/N, or signal to noise ratio, is an important measure of a camera's quality. A poor camera, low-light conditions or poor wiring causes "noise" which consumes processing power and disk space. A camera with a wide dynamic range is ideal, especially for recording areas in which both indoor and outdoor light are present. CCD (charge-coupled device) sensors provide high-quality images that are less susceptible to noise. CMOS (complimentary metal-oxide semiconductor) sensors offer less image quality, but are usually more cost-effective and energy efficient.
|
Share your thoughts with other customers:
|
||||||||||||||||||||||
|
Most Helpful Customer Reviews
3 of 3 people found the following review helpful:
1.0 out of 5 stars
Product not complete,
By
This review is from: Clover Electronics CCM636 Ultra Miniature Color Camera with Cone Pinhole Lens - Small (Black) (Electronics)
This product is being sold without the necessary extension cord, so one cannot use it immediately upon receipt. It only uses a proprietory extension cord which is not offered with the product. I had to contact the makers to find out. Both the makers and retailers would do good to inform the customers ahead of time that they need and should purchase the extension cord together with the camera. I was unable to operate the camera, so I cannot comment on its performance.
Share your thoughts with other customers: Create your own review
|
|
Suggested Tags from Similar Products(What's this?)Be the first one to add a relevant tag (keyword that's strongly related to this product).
|
|
This product's forum
Active discussions in related forums
Search Customer Discussions
|
Related forums
|
|