Clover Hot & Cold Bottleless includes everything you need for pure, delicious water. Included with your cooler is the commercial-grade water filtration, installation kit and set-up instructions. The elegant design complements any style home or office. It is perfect for typical usage of up to 30 people. Hot & Cold: The Clover BottleLess Cooler (sometimes called "point of use") has instant cold and child-resistant hot water faucets. Our sealed, stainless steel reservoir holds 1-gallon of ice-cold water. The hot tank is also stainless and holds 1.2 liters of steaming water. The water is dispensed at 180 degrees. External: The one-piece, UV-resistant cabinet is easy to clean and very durable. The "drip tray" lifts out and is dishwasher safe. Internal: Equipped with a top quality, quiet 1.7A compressor. Components are lead free as defined by the Safe Drinking Water Act, and the Lead Free Contamination Control Act. CSA and Energy Star Certified. The cooler is sanitized and sealed at the factory. Filtration: The Twist-Off purification cartridges are the ultimate "user friendly" filters. Replacement is completed in seconds. Just detach the filter body from the permanent head with a twist of the wrist. The new filter cartridge is just as easily replaced by threading it into the head. The Twist-Off system automatically turns the supply water off when the cartridge is turned. No drips. No hassles. This 1-micron filtration system is independently certified for 1,500 gallons of use for chlorine, lead, cysts, bad taste and odor reduction. That's the same amount of water as 300 of those big 5-Gallon bottles! This filter has been tested to NSF performance Standard 42 and Standard 53. Installation kit: The kit includes a John Guest stainless steel angle adapter valve for easy connection to a water source, and 25' feet of John Guest food-grade, flexible ¼" waterway, wall anchors, cable clips, zip ties, ball valve, and union connector.