Have one to sell? Sell on Amazon

Image Unavailable

Image not available for
Color:
  • Contour Helmet Mounts 6260
  • Sorry, this item is not available in
  • Image not available
  • To view this video download Flash Player
      

Contour Helmet Mounts 6260

by Contour

Available from these sellers.
  • Easy to use - will affix to any helmet
  • Cost effective
  • Includes a weatherproof carry bag
5 new from $44.93

There is a newer model of this item:

HELMET MOUNTS
Currently unavailable.


Product Details

  • Product Dimensions: 4.5 x 3 x 7.3 inches ; 5 ounces
  • Shipping Weight: 1 pounds
  • Shipping: This item is also available for shipping to select countries outside the U.S.
  • ASIN: B007VZY8QO
  • Item model number: 6260
  • Average Customer Review: 4.0 out of 5 stars  See all reviews (22 customer reviews)
  • Amazon Best Sellers Rank: #5,118 in Camera & Photo (See Top 100 in Camera & Photo)
  • Date first available at Amazon.com: April 17, 2012

Product Description

From the Manufacturer

Connect View Card

Contour Helmet Mount Details

Connect View Card
Contour Helmet Mounts

A combination of mounts for all helmet types. Whether you're using a vented, motocross, downhill, snow, skate, or climbing helmet, we have you covered. An extra 3M adhesive pack is included to allow you to easily change mounting positions or helmets.


Kit Contents

Connect View Card
Vented Helmet Mount

The Vented Helmet Mount has been given a serious upgrade in how the mount tightens and clamps down to your helmet. Find your mounting location, slide the straps through, and cinch them down. Slide your Contour camera onto the Trail system, and you're ready to go! Addittionally, you can tilt the camera forward or back to find the best angle.

Connect View Card
Profile Mounts (left and right)

The low profile design of the Profile Mount gets your Contour camera within millimeters of the surface that you apply it to, making the world's smallest HD wearable camera even more compact. Its 3M base adheres best to flat surfaces, but will conform to curves of helmets and fairings.

Connect View Card
Rotating Flat Surface Mount

The Rotating Flat Surface Mount is the ultimate in smart design and simplicity. This useful multi-purpose surface mount was developed to be easy to use, and give you the confidence that once locked, it will stay in place. Simply slip the camera onto the TRails, rotate the camera into position, push on the lock button, and you are good to go.

Connect View Card
Weatherproof Carry Bag

The bag is compact and fits easily into a small backpack or camera bag.

Product Description

A combination of mounts for all helmet types. Includes a Vented Helmet Mount, a right and left Profile Mount, a Rotating Flat Surface Mount, two (2) Rotating Flat Surface Mount Adhesives, and a Contour Weatherproof Carryiing Bag

Customer Questions & Answers

Customer Reviews

I'm very happy with these assorted mounts, they did the job perfectly!
Dstaubli
They come off with a little work and the adhesive doesn't just fall apart when you pull it off ( it comes off in one sheet).
Crowe
Helped mount my camera to the side of my mask, now I just need to figure out what to do with all the other pieces!
Shawn Forgey

Most Helpful Customer Reviews

1 of 1 people found the following review helpful By Crowe on January 29, 2014
Verified Purchase
The rotating mount and profile mounts are clutch for pretty much anything you could possibly need a sticky mount for. They come off with a little work and the adhesive doesn't just fall apart when you pull it off ( it comes off in one sheet). I've fallen a few times on my Roam2 mounted to these and they've held on nicely. Had a profile mount on my old bike for about a year without it falling off at all living outside in the rain and going down about once everytime I took it out (weekly or at worst bi-weekly).

My only complaint is that the vented helmet mount requires you to have a helmet with a LOT of vents in it. My Giro DH helmet's vents are too far apart for this to fit properly. that said I managed to make it fit anyways by awkwardly putting it on the visor area. It works, but not quite how it's supposed to haha. Still 5 stars purely from the longevity and impressive quality of all of contour's mounts.

TL;DR

Rotation mount: 10/10- sticky, locks nice, comes with spare stickies.

Profile mount 9.5/10. Just with these were designed a little less left/right biased than they are.

Vented helmet mount. 8/10 just because it didnt work properly on my helmet. Works on my friend's Bell helmet though. this might be slightly more my fault than the mount's fault.

Idealy i'd give this like a 4.5/5. but i'll give em the 5!
Comment Was this review helpful to you? Yes No Sending feedback...
Thank you for your feedback. If this review is inappropriate, please let us know.
Sorry, we failed to record your vote. Please try again
1 of 1 people found the following review helpful By mark on April 23, 2013
Verified Purchase
when I ordered the Contour Camera wasn't sure how I would like it and or how to mount it the mounts were great gave me many options
Comment Was this review helpful to you? Yes No Sending feedback...
Thank you for your feedback. If this review is inappropriate, please let us know.
Sorry, we failed to record your vote. Please try again
1 of 1 people found the following review helpful By D. Bei on December 5, 2012
Verified Purchase
Make sure that you check the angle of view before you permanently mount it. Otherwise the kit is great. it sticks
Comment Was this review helpful to you? Yes No Sending feedback...
Thank you for your feedback. If this review is inappropriate, please let us know.
Sorry, we failed to record your vote. Please try again
By Sven Christen Bybee on November 12, 2013
Verified Purchase
Good set of attachments. Had no problem mounting my camera to my bike helmet, and it is pretty sturdy too.
Comment Was this review helpful to you? Yes No Sending feedback...
Thank you for your feedback. If this review is inappropriate, please let us know.
Sorry, we failed to record your vote. Please try again
By John Brigan on October 31, 2013
Verified Purchase
They throw in a bunch of crap that you really don't need. I just wanted a good, quality helmet mount. The mount I got is worth, maybe 15 bucks. Very limited adjustment. But, the company has gone out of business. So it really doesn't matter.
Comment Was this review helpful to you? Yes No Sending feedback...
Thank you for your feedback. If this review is inappropriate, please let us know.
Sorry, we failed to record your vote. Please try again
By FromPhilly on October 18, 2013
Verified Purchase
Are these worth the $50? Probably not. Do they work? Yes. Are there alternatives? Look up other universal camera mounts.

Any other problem? Company is down now...
Comment Was this review helpful to you? Yes No Sending feedback...
Thank you for your feedback. If this review is inappropriate, please let us know.
Sorry, we failed to record your vote. Please try again
By DENELLE O'BYRNE on September 7, 2013
Verified Purchase
I used this for demo derby to hold my contour camera the sticky tape did let go so I ran couple small screws into helmet cause I use it for derbys and take a lot of jolts
Comment Was this review helpful to you? Yes No Sending feedback...
Thank you for your feedback. If this review is inappropriate, please let us know.
Sorry, we failed to record your vote. Please try again
By John on July 31, 2013
Verified Purchase
If you have a contour camera, these are a must. I have one mounted on top of my motorcycle helmet and another side mount on a headband. They work great, but they are pricey. There is no "generic" alternative that I know of though.
Comment Was this review helpful to you? Yes No Sending feedback...
Thank you for your feedback. If this review is inappropriate, please let us know.
Sorry, we failed to record your vote. Please try again

Customer Images