From the Manufacturer
Sleeveless vest with open neck line. Zipper front, with panel shaping at the waist and center back. Hip length and shorter in the front, so as not to limit normal movement or activity. For safety purposes this vest also has 2-Inch reflective tape sewn on the front and back, for times when visibility is a necessity. Great visibility in poorly lit areas and at nighttime. Cool Medics products are constructed from a patented three-layer fabric that by combining hydrophilic fibers into a fibrous batting core and a thermally conductive lining will provide cooling after allowing the product to soak in water for 10 - 30 seconds. Not longer. The water activates the cooling process by charging the fibers with moisture and creating an environment for evaporation. When moisture in the batting evaporates, heat is removed and cools the surrounding area, transferring the cooling effect to the wearer. Depending upon the environment this cooling could last up to 8 hours, and can be recharged again by simply immersing the product in water to restart the cooling process. Activation - A simple 3-step process: •Step 1: Immerse the product in water for about 10 - 30 seconds so that the fabric absorbs the water right to the inner filling. The water does not need to be cold water for this activation process to work. WARNING: DO NOT let it soak for longer than 30 seconds as the product will absorb too much water and you may risk permanently damaging the internal fibers •Step 2: Gently wring out the excess water so that the product is wet, but not dripping. You may towel dry the inner membrane if you require. •Step 3: Wear the product. You will be pleasantly surprised how cool you will instantly feel. Washing Instructions: SPOT wash with cool water and gentle care soap. Allow to flat dry or hang dry. DO NOT use a washing machine or tumble dryer. This will damage the patented inner fibers of the garment and your Cool Medics product will lose its cooling properties.