Your rating(Clear)Rate this item


There was a problem filtering reviews right now. Please try again later.

83 of 83 people found the following review helpful
on September 21, 2010
I recently installed this unit to the ceiling joists in my studio (works on walls or ceiling). It holds up 3 rolls of 9 foot wide seamless paper. I love it. First, it takes only seconds to lower one background and raise another. Second, not big heavy rolls to lug around. Third, it saves floor space (no awkward stands required) and is much more stable than floor stands, which can tip and crash to the floor if you aren't careful, especially if working alone. Fourth, my paper stays in much better shape, with less tearing, wrinkling and wear & tear. I bought some thin pieces of wood lathe at Home Depot, (8' long X 1/4" thick X 1-1/4" high) and stapled them to the end each roll of seamless. This gives me a nice straight edge I can pull to lay out the paper and keeps it flat. It also provides just a little weight to the paper so it unrolls straight down instead of curling. The plastic chain and sprocket drive works great and eliminates the need to ladders or step stools.

I like it so much, I ordered a 2nd unit, which I plan to install for use with muslin backdrops. Since the muslins do not come on cardboard rolls, I will buy 10' long PVC, aluminum or cardboard pipes/rolls and use them with the muslin. Home Depot has cheap PVC 10' pipes for $3.50 each. I'll tape the muslin to the pipe and use it the same way I do the paper.

If you need to conserve space and want ease and speed, this is a great unit at a great price.
44 commentsWas this review helpful to you?YesNoSending feedback...
Thank you for your feedback.
Sorry, we failed to record your vote. Please try again
Report abuse
29 of 29 people found the following review helpful
on February 14, 2010
I was thinking about buying a motorized background support system for use in my simple garage studio, but after seeing the HUGE price difference, I decided on this one. It works very well, especially for 10x12 size backdrops. Larger backdrops may require an extra person to help it onto the rollers properly. Speaking of rollers, I simply went to Home Depot and bought 2" EMT conduit...works great!
The only thing I'm leary about is the plastic chain. Works fine if you don't put too much stress on it. Again, with a 10x12 backdrop, the chain works well. Also, it's very easy to shorten the length of the chain so that you can keep the whole loop closer to the ceiling.
1111 commentsWas this review helpful to you?YesNoSending feedback...
Thank you for your feedback.
Sorry, we failed to record your vote. Please try again
Report abuse
16 of 16 people found the following review helpful
on December 23, 2011
I just ordered this last week and installed it on the wall in my home studio.

***For all future buyers, you need 3, 10 foot by 2 inch PVC pipe, aluminum or cardboard tube to put backdrops up with. Now I used PVC pipes from home depot which were about $6.29 each. I then put the tube through the stitched end of my muslin backdrops and secured it with velcro strips on the inside of the stitching and outside of tube. This worked great!!

***I also needed different hardware then what came with this item. I have drywall/sheetrock thats hollow and needed good anchors to secure the backdrop mount to the wall. I went to ACE hardware and bought butterfly hooks that came with screws and it worked GREAT!!

All in all, after I had the correct hardware and pvc pipes, everything went smoothly. The roller system is awesome!!
Any questions please let me know.
55 commentsWas this review helpful to you?YesNoSending feedback...
Thank you for your feedback.
Sorry, we failed to record your vote. Please try again
Report abuse
17 of 17 people found the following review helpful
on February 3, 2012
If your backgrounds are already on a roll (as paper, vinyl, etc. often are), then you do not need PVC to put them on a roll. The PVC is needed for when you are putting up muslin or canvas that don't come on rolls. You can use the wall mount system directly into the paper roll!
11 commentWas this review helpful to you?YesNoSending feedback...
Thank you for your feedback.
Sorry, we failed to record your vote. Please try again
Report abuse
17 of 18 people found the following review helpful
on November 15, 2010
pretty nice heavy duty mounts for your seamless paper. like some people might say, the chains dont seem like theyd stand much tension. comes with primitive instructions, but its not hard to figure out. the tension screws are a little difficult to adjust sometimes.

careful about storing your seamless paper up there for prolonged time, they might sag and cause ripples.
11 commentWas this review helpful to you?YesNoSending feedback...
Thank you for your feedback.
Sorry, we failed to record your vote. Please try again
Report abuse
15 of 17 people found the following review helpful
on August 27, 2010
This is a great product, very easy to use and setup. . .once you figure out that you can't use the screws that are provided. You will need to obtain a different set of screws/anchors in order to attach the mounts. I struggled with what was provided before giving up and using anchors and screws that were much easier to use. If you are mounting into dry wall, get a good set of dry wall anchors (the kind that look like large screws and thread into the wall which you then screw the bolt into work best); this will save you about 30 to 45 minutes of frustration. If you are mounting into concrete, cinder block, or something similar go with bolts designed for that material. Once you get past that issue, everything is smooth sailing.
0CommentWas this review helpful to you?YesNoSending feedback...
Thank you for your feedback.
Sorry, we failed to record your vote. Please try again
Report abuse
14 of 16 people found the following review helpful
on January 30, 2013
I just put these to use in my new studio. It can mount to either the wall or the ceiling. I was concerned about the plastic chain being flimsy but although it is plastic it seems well rugged enough not to be of concern. I will tell you though that the colors of the plastic chains make me want to puke! My studio is supposed to look professional and these tacky colors do nothing to contribute to that. I suppose in the end it didn't bother me THAT much because I didn't replace them with other colored chains. Dear CowboyStudio, cowboy-up and make this set with some neutral colors! All black chains would be great. I don't need them color coded, I know what backdrop I'm pulling on.
0CommentWas this review helpful to you?YesNoSending feedback...
Thank you for your feedback.
Sorry, we failed to record your vote. Please try again
Report abuse
6 of 6 people found the following review helpful
on December 13, 2013
I didn't want to attach to a wall so I just used U clamps and attached to my Ravelli ABSL backdrop and it works great!
review image review image review image review image review image
0CommentWas this review helpful to you?YesNoSending feedback...
Thank you for your feedback.
Sorry, we failed to record your vote. Please try again
Report abuse
4 of 4 people found the following review helpful
on July 19, 2013
These things work great, use 2 inch PVC with them, but double wall the PVC or it will bow. Get a 10 ft of 2 inch PVC for the muslin backdrop. Also get a five foot piece of 1.5 inch PVC. Slide the 1.5 inch into the center of the 10 ft piece for support. There is some play inside the tube so I used two different methods to fill in the space. On one set I wrapped the 1.5 inch PVC with 14mm duct tape. Applied some dish washing soap on the tape for lubrication and slide the 1.5 into the 2 inch pipe. The second method I tried worked also but was a bit messy. I drilled three small holes into the 2 inch PVC then slide the 1.5 inch tube into the 2 inch tube then sprayed "Insta foam" into the holes I drilled. It's the spray foam from home improvement centers used to spay into cracks around door jams, windows etc. to insulate the. If you choose this method keep a piece of duct tape right next to the holes because as soon as you pull the straw from the hole the foam will find the path of least resistance (your hole) and come flying out. Until it sets up it will just keep oozing out. So ...duct tape or finger for about ten minutes. I tried the finger method, you don't want to use that. My muslin back drops have been hanging for about two weeks, deployed the rolled back up several times and the PVC shows no signs of bowing. Just be gentle with the plastic chains with the weight of the muslin. Buy them , they're worth the price.
0CommentWas this review helpful to you?YesNoSending feedback...
Thank you for your feedback.
Sorry, we failed to record your vote. Please try again
Report abuse
7 of 8 people found the following review helpful
on July 31, 2013
There were many versions of this type product online. This one was by far the cheapest and I mean only in price. The Brackets are strong and sturdy and even though the instruction sheet was a little confusing, it was very easy to install based on the obvious components. The expandable core holders work great with $5 - 2inch diameter PVC from Home Depot. You can also use direct with purchased Paper Roll using the existing cardboard cores. I like the PVC for my fabric backgrounds.
I would definitely recomend this product. Great way to get your backgrounds off the floor and open up floor spce from the traditional stands. Plus now I can use my stands for Lighting and flashes etc...
11 commentWas this review helpful to you?YesNoSending feedback...
Thank you for your feedback.
Sorry, we failed to record your vote. Please try again
Report abuse

Questions? Get fast answers from reviewers

Please make sure that you've entered a valid question. You can edit your question or post anyway.
Please enter a question.
See all 37 answered questions


Send us feedback

How can we make Amazon Customer Reviews better for you?
Let us know here.

Your Recently Viewed Items and Featured Recommendations 
 

After viewing product detail pages, look here to find an easy way to navigate back to pages you are interested in.