Most helpful critical review
54 of 58 people found the following review helpful
Inexpensive but not exactly high quality
on May 20, 2010
I'm not sure what the other reviews where talking about when they said 'all metal'. Obviously the shoe mount is metal as are the screws but the main body is all hard plastic. Which isn't all bad if you're worried about weight (but probably not as durable as a metal design). The top mount works as expected (in my case I'm mounting a transceiver and then my 580EX II on top of that). What seems out of whack is the design for the umbrella holder. There is a flat spring in the hole meant to hold the umbrella steady (I can see what they were going for here, my other brackets have a simple flaw, the umbrella always either works itself loose or you put huge gouges in the umbrella shaft from cranking down on the screw to hold it in place). However, the spring just so happens to line up with the side of the spring with the umbrella is in the hole. So instead of holding the umbrella in place, the screw just tightens on the spring. Not real helpful. So in the end I did what I've had to do so many times before with this type of equipment, rig up my own solution. Essentially, to make it work, you need to get a small piece of pvc or copper pipe, (about 1/8" or less in thickness) cut it in half, then cut a portion of that off to fit into gap in the hole for the umbrella. That pushes the umbrella shaft up higher into the spring and allows the screw to engage correctly and tighten everything down. If only the 'engineer' that designed this had tested it before they started shipping it. I guess for $10 that's about what you'd expect.