Crain 812H Super Saw 13 Amp Undercut Saw with Wood and Masonry Blades

Other products by Crain Cutter

Product Description

From the Manufacturer
Undercutting can be a pain, but here's the tool that gets the job done faster and easier than any other. The Crain Super Saw Kit Features a 13-amp motor and a 6 1/2-inch diameter flush-cutting blade for tackling the thickest doors and most awkward angles. Designed to undercut even those hard-to-reach inside door corners, the Super Saw cuts through 1-3/4-inch thick doors without taking them off their hinges. A blade height adjustment from flush 1-1/4-inch off the floor enables a variety of gapping sizes. A retractable stabilizer keeps the saw operating smoothly under load. Your purchase includes a carrying case, carbide blade, masonry blade, and easy-to-follow instructions.

FEATURES

• Fully adjusts from flush to 1-1/4" off the floor for a variety of door gap sizes
• Undercuts doors as thick as 1-3/4" without removal for less downtime and more productivity
• 13 amp motor for fast, clean cutting
• 6-1/2" diameter flush-cutting blade for cutting inside edge of door in tight areas
• Includes carrying case, carbide blade, masonry blade, and instructions.

SPECIFICATIONS

• 6 1/2-inch diameter
• 13-amp motor
• Cutting height range: Flush-1-1/4"
• Cutting capacity: 1-3/4" thick

Product Description
Saws are sold in kit form only, complete with carrying case; Powerful 13 amp. motor; 6-1/2" diameter flush-cutting blade; Blade height adjustable from flush cut to max. 1-1/4" off floor; Saw comes with one carbide blade, one masonry blade, detailed instructions, and carrying case

Product Details

• Product Dimensions: 14 x 13 x 11.5 inches
• Shipping Weight: 19 pounds (View shipping rates and policies)
• Shipping: Currently, item can be shipped only within the U.S.
• Shipping Advisory: This item must be shipped separately from other items in your order. Additional shipping charges will not apply.
• ASIN: B00023RTY0
• Item model number: 812H
• Average Customer Review: 4.0 out of 5 stars See all reviews (2 customer reviews)
• Amazon.com Sales Rank: #52,172 in Home Improvement (See Bestsellers in Home Improvement)

  Popular in this category: (What's this?)

  #3 in

  Home Improvement > Power Tools > Saws > Jamb Saws

Customer Reviews

Most Helpful Customer Reviews

5 of 5 people found the following review helpful:

5.0 out of 5 stars A Super Super saw, June 16, 2005

By	S. Paxson "Cool Tool Guy" (Chicago, IL) - See all my reviews (REAL NAME)

This puppy ain't cheap but it is worth the price. Laying ceramic tile by making many cuts and nibbling away till a tile fits properly around a door casing is a pain and very time consuming. 5 minutes of time with this saw (1 minute to get it out of the truck, 3 to get it out of the case and set up, 1/2 minute (i'm old) to get down on my knees and another 1/2 minute to make the cut) slide the tile under the jamb and casing for the perfect no grouting fit. WOW !!!
If the door binds on the tile, or anyother type floor, adjust the undercut saw accordingly and trim the door while in place! Your Done!!!

1 of 1 people found the following review helpful:

3.0 out of 5 stars It worked for me, January 9, 2007

By	Joseph S. Ribble - See all my reviews (REAL NAME)

I purchased this tool to cut vertical cedar siding at the top (under the overhangs) to receive aluminum soffit panels. The saw worked well for the majority of the cuts, and I used a Fein Multimaster to get what I couldn't with the Crain saw. I rated this item with 3 stars because it worked fine and I'd use it again for the same task or other tasks (perhaps cutting jambs like it was designed for). I rated it with 3 stars because it has a lot of room for improvement, chief among the problem areas is its cumbersome depth adjustment. I would say this is a utilitarian saw at best. This saw could benefit greatly from some thorough engineering effort to improve its adjustment/guard systems and make it much easier to use.