Customer Reviews

Culligan FM-15RA Level 3 Faucet Filter Replacement Cartridge

5 star:		(100)
4 star:		(41)
3 star:		(10)
2 star:		(12)
1 star:		(11)

 

 

The Brita faucet filter does an excellent job of filtering out impurities from tap water -- that is, when it manages to stay attached to the faucet. However, in my experience with it (two years and two different models), a tremendous amount of my valuable time was wasted trying to reattach the filter after it would repeatedly fall off. Although I have no direct experience with the Pur faucet filter, my understanding (drawn from other reviews) is that it suffers from the same problem.

Happily, after purchasing the CULLIGAN Faucet Filter several months ago, I can now report with confidence that it is plagued by no such similar defect. In other words, once attached, it remains firmly in place, and works every bit as effectively as rival brands. So for anyone who has tried those other brands and encountered endless frustration in endeavoring to keep them attached to the faucet, my advice is: Don't give up just yet! Try the Culligan model. It's solidly built, competitively priced, and replacement cartridges are readily available from Amazon. For me, at least, the Culligan at last put an end to the gratuitous, time-wasting burden of having to continually reattach a recalcitrant water filter.

I love the culligan water systems. The base that the cartridge goes into is made better than britas,With brita I was buying a new base with almost every cartridge change and culligan is superior in price ,quality and every other aspect.And I think the water also taste better than water that is filtered using brita.Try it and see for yourself

Buy one at a time, and not too far in advance. Filter works well, but Culligan only warrants for 30 days from date of purchase. If you buy several (as I did) and one is defective (spurting water all over kitchen!), no real way to obtain a replacement.

At first, I did experience what a few of the other reviewers mentioned: after a short while the filter didn't appear to have any affect on the taste of the water.

The problem, I discovered, is that if you run the water through the filter too quickly (by opening up the tap all the way) the charcoal filter just can't do its job. As a rule of thumb, only allow enough flow through the filter so that it takes about 10-15 seconds to fill up a glass of water, and you'll have great tasting water. So, if you have high water pressure, make sure you don't open of the faucet all the way when filling a glass. There's just no way a filter as small as this can do its job properly at the max flow rate of most faucets. You really need a large in-line filter for that.

Note that this only applies to the filter's odor and taste removal properties, because this involves a chemical reaction of sorts where activated charcoal pulls chlorine (and other chemical) out of the water by binding to them. This is a completely different mechanism than what you normally associate with filtering, such as particles being caught in a mesh (which is essentially how the rest of the filter works in these, and so it's really only the odor and taste that is affected by the rate at which you let water through the Cullgan).

The Culligan filter is more reliable and lasts longer than the Pur or the GE filters but it is also the slowest filter in terms of water flow.

I wanted a simple but effective economical water filter for my apartment. I did considerable research (including purchasers of various products at Amazon) and at Consumers Reports as well as various internet sites. What appeared to be the best solution for me was a filter that attached to the tap. Simple to attach and effective water filtration. I've been using the Culligan FM-15RA level 3 filter for over a year now and besides being economical it is easy to install and to replace filters (every few months). Since purchasing, we had our water professionally checked for chlorine, bacteria and contaminents (metals etc) and it came through with fjying colors. We are very pleased with the unit.

These filters are a b**ch to get out of the casing (maybe I'm tightening them too much, so be careful not to do that), but other than that I'm happy with Culligan. And, the new option to have it auto-shipped regularly is handy, especially because the Culligan filter doesn't have a fancy replacement indicator light.

Finally, after wasting a couple of hundred dollars in Pur products, I moved to Culligan and have not been disappointed. It DOES NOT LEAK, the filter life is twice as long, and is much easier to replace.To top it, the subscribe & save pricing of amazon is amazin !

This product gives fairly clean water, but it really does not last long. Even though it says it'll last about 2 months, about one month into using it, the one I have runs very slowly as if it has been plugged. I would suggest going with a different type of filter so you won't have to keep buying this filter refill.

I got this as replacement for my Pur facet. Pur started to leak after using it for 2 months. I turned to Culligan. First time installation is easy for Culligan faucet, but changing filter is kind of a drag. The filter design is a bit awkward as you have to loosen the old filter from the bottom. I found changing Pur filter was alot easier. Culligan filter are stuck so hard in the faucet that I have to take out the entire faucet system off before changing the new filter. If you are old, forget about buying Culligan. You will have to rely on some one younger to replace the filter.