D-Link Wireless DIR-615 N Router, 4-Port 10/100 Switch, 2 Antennas, Draft 802.11n

Other products by D-Link

Product Details

• Product Dimensions: 10.7 x 2.6 x 8.5 inches ; 2.7 pounds
• Shipping Weight: 2 pounds (View shipping rates and policies)
• Shipping: Currently, item can be shipped only within the U.S.
• ASIN: B000QD7B6W
• Item model number: DIR-615
• Average Customer Review: 3.2 out of 5 stars  See all reviews (243 customer reviews)
• Amazon.com Sales Rank

  Popular in this category: (What's this?)

  #14 in

  Electronics > Computers & Accessories > Networking Products > Routers

• Date first available at Amazon.com: July 7, 2004

Product Description

Product Description

The D-Link Wireless N Router (DIR-615) provides a better wireless signal for your network than existing wireless 802.11g technology. Upgrading your home to Wireless N provides an excellent solution for sharing an Internet connection and files such as video, music, photos, and documents. D-Link Wireless N products use Intelligent Antenna technology to transmit multiple streams of data which enable you to receive wireless signals in the farthest corners of your home. Not only does D-Link's Wireless N technology extend your wireless range, it also works with your existing 802.11g and 802.11b wireless devices. The DIR-615 supports the latest wireless security features to help prevent unauthorized access, be it from over a wireless network or from the Internet. Support for WEP, WPA, and WPA2 standards ensure that you will be able to use the best possible encryption, regardless of your client devices. In addition, this Wireless N router utilizes dual active firewalls (SPI and NAT) to prevent potential attacks from across the Internet

Customer Reviews

Most Helpful Customer Reviews

89 of 96 people found the following review helpful:

4.0 out of 5 stars Good Value and Performance, January 28, 2008

By	Tom G (Arizona) - See all my reviews

This is a very good router, but I had issues during setup. I have Qwest DSL and the DIR-615 wizard setup couldn't auto-configure the router to provide internet service.

Most routers use an intranet address in the range of 192.168.x.x and then devices connected to the router are assigned within that ip range. I finally manually played with the settings and still couldn't get it to work. Frustrated, I called Qwest thinking the problem was with the DNS values. That assumption was incorrect and generally Qwest DSL requires no tweaking at the router level. Qwest DSL tech support was great. They said it was a setup issue with the router and called Dlink's tech team on a Sunday morning and we had a 3-way call. Dlink's technician had me fixed up in 3 minutes.

Here's what worked for me. Under the router's 'network settings' we set the router IP address to 172.16.0.1 and the subnet mask to 255.255.0.0. If not checked, enable "DHCP Server". Under 'Wireless' set the Channel to 11 and the Mode to "Mixed" to support 802.11b,g,n. I set security to WPA-Personal. Be sure to save the configuration and this will cause the router to reboot. If things don't work immediately, unplug the modem to cold-start the system, wait a minute and finally plug in the router.

Contrary to what someone wrote in a review, this router does indeed support wireless-N devices in a mixed environement and does not downstep to G for the whole network.

Remember, you can't setup the router via wireless. You have to use an ethernet cable from your pc to port #1 on the router. Another cable runs from the router Internet port to the dsl modem.

Before calling tech support, first confirm that the modem is working. Run a cable from the pc to the modem and confirm you can browse the Internet. With the modem eliminated as an issue, the tech people can quickly help you configure the router. I'm using Vista and the setup process did not require any Windows firewall changes so keep the firewall 'On'.

I may be wrong but here's what I think the core setup problem was for me. The Qwest DSL modem uses a DHCP Default Gateway of 192.168.0.1. This is the same IP the Dlink router attempts to use as its address. Thus you end up with an IP addresss conflict since both can't use the same address. The Dlink technician changed the router address to a different subnet in 172.16.x.x and eliminated the conflict.

91 of 102 people found the following review helpful:

3.0 out of 5 stars Good router, but N mode doesnt work in mixed environment, December 14, 2007

By	Andrew Sigal (Oakland, CA United States) - See all my reviews (REAL NAME)

This is an attractive router. I found it easy to set up, it has up-to-date security features and works well (except for the 802.11N issue)

My problem with this router is that if you have any 802.11G devices in your network, then the network will run at G speeds, period (says customer support.) I have one network device that is 802.11G and non-upgradeable. I bought this router with a DLink 802.11N PCMCIA card to get my laptop running at 802.11N, however, the router will not talk N to the card in the laptop, because I have a G device on my network. Thus, while the router is now doing a fine job as an 802.11G router, I might as well throw the PCMCIA card away.

DLink's web site says of the DIR-615 router that "Not only does D-Link's Wireless N technology extend your wireless range, it also works with your existing 802.11g wireless devices." It would be nice if DLink fessed up that mixed-mode doesnt work as expected. That factoid is hidden in a FAQ on the page for the PCMCIA card. I had to call customer support to learn this. They say there are no plans to upgrade the firmware to truely support mixed mode environments.

19 of 21 people found the following review helpful:

5.0 out of 5 stars No Problem with DIR-615, February 5, 2008

By	Billy Lee (Queens, NY) - See all my reviews (REAL NAME)

I'm writing this review to help dispel the myths about this router. I read many bad reviews for this router after I ordered it. I got really anxious and started getting buyer's remorse, before I even had it in my hands. I received the DIR-615 today and immediately hooked it up, I transfered all the cables from my D-Link 'b' wireless router. I restarted my Time Warner Cable Modem and my Mac G4 computer. Everything worked fine. I checked the wi-fi connection to my iMac, which worked perfect, after I changed the network selection on the iMac. I then took my Titanium G4 Powermac to the second floor (the DIR-615 is setup in the basement). I got perfect reception 2 flights up. After checking all Wi-Fi functionality, I upgraded the firmware, from ver. 2.2 to 2.4 via D-Link's web site, all is well. no problems.