DELTA 34-568 Miter Gauge Clamp

by Delta

Product Description

Amazon.com Product Description

The DELTA 34-568 Miter Gauge Clamp helps you increase the accuracy of your miter gauge. It attaches to the DELTA 34-895 miter gauge and lets you clamp your workpiece more securely, allowing for more accurate cuts. Included is a clamp bar, front and rear mounting posts, and two sliding clamps.

Product Description

Includes Clamp Attachment for Miter Gauge - 34-568, Clamp Bar, (2) Sliding Clamp Screws, Front & Rear Posts

See all Product Description

Product Details

• Product Dimensions: 1 x 4.8 x 17.5 inches ; 1.3 pounds
• Shipping Weight: 1.6 pounds (View shipping rates and policies)
• Shipping: This item is also available for shipping to select countries outside the U.S.
• ASIN: B0000223EB
• California residents: Click here for Proposition 65 warning.
• Item model number: 34-568
• Average Customer Review: 4.2 out of 5 stars  See all reviews (5 customer reviews)
• Amazon Best Sellers Rank: #49,219 in Home Improvement (See Top 100 in Home Improvement)
  • #68 in Home Improvement > Power & Hand Tools > Power Tool Accessories > Gauges

Customer Reviews

Most Helpful Customer Reviews

7 of 7 people found the following review helpful:

4.0 out of 5 stars Does what it says it will do, February 21, 2001

By A Customer

Amazon Verified Purchase

This review is from: DELTA 34-568 Miter Gauge Clamp (Tools & Home Improvement)

The clamp goes on well and holds on to material securely. The only draw back is that the size that will fit in the miter clamp is limited by the rails securing the hold down. Really not a flaw, just an inconvenience. Amazing how Delta stuff fits so well on Delta products.

6 of 6 people found the following review helpful:

5.0 out of 5 stars 11 Stars and Counting, September 20, 2004

By 

Bob Feeser "MillCrafters.com" (Springfield, PA USA) - See all my reviews
(VINE VOICE)    (TOP 1000 REVIEWER)   

Amazon Verified Purchase

This review is from: DELTA 34-568 Miter Gauge Clamp (Tools & Home Improvement)

(...)
I just received this Delta Deluxe Miter Gauge #34-928. You wouldn't believe me if I told you how long ago I ordered it. I guess a fresh batch is in so order it quick. Now on to the item. When they say that it is accurate, the first thing I did, when I took it out of the box, was break out the Bosch Digital Protractor. It measures angles with a digital readout in tenths of a degree. (Equal to 3600 dots in a circle, no matter how small the circle) I put the miter gauge to the test. I clamped an aluminum level onto the face to extend the surface, and guess what? I got perfect readings after trying the detent stops, and even got the same results when I eyeballed a setting just using the pointer. It wasn't even off by a tenth of a degree.
At first I was confused, because some of the stops weren't right on the number, then I realized that they have stops at the popular detents, and some of those are in tenths of a degree.
Point number two is that I was impressed that the miter gauge bar that rides in your miter slot has little Allen bolts imbedded in it, so you can adjust it perfectly, to eliminate any play. When I put it in my Powermatic 66, it fit so perfectly, without any play, that I don't even need to fiddle with it. It is so snug that you would have to measure the play in thousandths of an inch, as in non-existent, yet it slides along the track like it was on greased wheels. It fit my Bench Dog miter track on their Router table extension for table saws the same way. The Might T track miter track guides had a little slop in it, but that is obviously the track and not the gauge. I guess you can tell where I will be using it. (Although the play is adjustable for any 3/4 x 3/8 track)
Point three is that the bottom of the gauge is polished so smooth that it will not scratch your saw tabletop. The front face of the gauge where you rest your work, looks like it was fine ground-polished with something like a 1000 grit wheel. You can see ultra-ultra fine lines going in a circle from where it was fine machined.
I strongly recommend that you also get Delta's clamp attachment that works with this gauge. The one that I bought is the 34-568 clamp assy, and it fits and works perfectly. Delta and Amazon feature the Delta cheapy miter gauge with the clamp as a combo package for about the same money as buying this Deluxe gauge and the 34-568 clamp assy as separate pieces. So for about the same money you are getting Delta's best, and in this example it is worthy of that title.
The gauge and clamp combo perfectly resolves the problem of when you are trying to cope the ends of your rails in a raised panel bit set. You know the problem, you have to hold that two-inch wide board and run the bit over the tip. Trying to get the bit to not move the board, by either pushing it a little away from the fence, or run into the second fence face causing a stop is a major accomplishment. Many use sleds with clamps on them, but then you are raising the work piece off of the table to make up for the sled base plate. With a router, that is a major consideration, because that oftentimes leads to having to raise the bit higher up out of the collar, causing more vibration and potentially a dangerous bit flying condition. This gauge and clamp combo locks it in just the same, but keeps the work piece flat against the tabletop. The other advantage to that is if you are running some larger pieces at the same time, you can do it by removing the gauge, and not have to change a bit setting. Wow! I'm getting off on this, I don't know about you. :-)
Another point is that the picture doesn't do it any justice. The fit, the finish, the accuracy of the deluxe gauge is better than any other miter gauge I have seen, even the one that came with the Powermatic saw. I can't recommend this high enough. Is it because it is a waxed Ferrari sitting in the garage? No, it is because it is as accurate and fine as a miter gauge can get. Buy one, you won't be sorry. Hope this helps.

1 of 1 people found the following review helpful:

5.0 out of 5 stars Just what I needed!, November 10, 2006

By 

J. Houston (Atlanta, GA United States) - See all my reviews
(REAL NAME)   

This review is from: DELTA 34-568 Miter Gauge Clamp (Tools & Home Improvement)

This Miter Gauge Clamp is definitely what I have been needing. I cut many odd size and shape pieces of wood for scroll saw projects and this clamp helps me hold the boards square to the blade. It is also a great safety feature when you cut odds and ends like I do. It has probably saved me four times what I paid for it in being able to get the most from a piece of lumber.