|Item Weight||29.9 pounds|
|Product Dimensions||60 x 3 x 3 inches|
|Item model number||36-T30|
|Item Package Quantity||1|
|Warranty Description||Two Year Warranty|
DELTA 36-T30 T2 30-Inch Fence and Rail System
|Price:||$395.00 & FREE Shipping|
Usually ships within 4 to 5 days.
- Enter your model number above to make sure this fits.
- The fence clamps securely to front tube and rear rail
- Steel tube fence body glides easily to handle quick and repetitive work along with precision ripping and squaring cuts
- Projected aluminum face attaches to solid-steel angle iron and tubing
- 3-point T square locking system is accurate with 1/64 of an inch
- Added rear hold down support when using jigs and featherboards
Frequently Bought Together
Customers Who Bought This Item Also Bought
From the Manufacturer
Top Customer Reviews
I have to admit - I purchased the fence from another retailer for a bit less money. But the Amazon deal is actually better - you get the legs and a table board along with the fence for almost the same price. My review will be confined only to the fence itself.
The fence comes nicely packaged. I was prepared to spend an afternoon doing the installation, but to my surprise, the fence bolted right onto my saw in about 20 minutes. I guess Delta has not changed the spacing of the bolt holes for the rails over the past 30 years. The instructions were pretty clear, and I had aligned the fence with the saw's slots in a few minutes. The fence includes 2 sets of alignment bolts that make accurate alignment in two planes simple. Although I did not use all the hardware, the fence includes a variety of additional bolts - I am guessing these are for installation on saws that use stamped steel wings, or perhaps different drilling of holes.
This fence is a significant upgrade over my original fence. I get an additional 6-8" of rip capacity to the right of the blade (and this is key when trying to rip a piece of plywood in half). The fence glides smoothly throughout its travel left and right. It includes a gauge that makes quick measurements possible by sight (I still use a ruler just to make sure).Read more ›
It was fairly easy to retrofit as well, only requiring me to drill a few holes in the table for mounting. The entire retrofit took less than 1 hour, drilling included. The fence lines up parallel to the blade within 0.005" every time (the old fence could be off more than 1/16" requiring tedious adjustment). It was parallel and square to my table out of the box. It also provides an additional 6" of capacity to the original rails. I look forward to using this fence for many years.
If you live near a Lowe's, this fence is usually on display on their Delta table saw. After trying it out in the store, I decided to purchase it.
The fence itself gets 5 stars. I gave it only 4 stars because I purchased this from Amazon as it was to come with a table board and legs. Unfortunately, I was told Delta changed the product and those are no longer included. This can be purchased elsewhere for slightly less.
Excellent product for the price.
This was installed on a late-seventies vintage Rockwell 10" contractor's saw. No holes to drill, with the right screws, (not supplied, but not a big deal) you could screw right into the original table. The supplied screws are smaller, and long enough to work.
If you plan on taking about an hour, you can clean and adjust your saw and the fence. (Twenty minutes stated in another review is fast.)
The fence moves easily and, after an easy adjustment, is dead on every time it's locked.
It moves well because of plastic slides, which will wear-out someday. I'm ordering an extra set and attaching them to the saw in a baggie.
The rails are longer than the original, which allows ripping a larger panel, but a little reorganizing may be needed if you maximize your tool space.
This fence really upgrades the saw. Sometimes you wish it wouldn't be so perfect, I can't say I need a new saw now.
Four rather than five stars because of the plastic guides.
Most Recent Customer Reviews
The instructions are ok to follow but it can get confusing. I've been using my new fence for about 6 months now and it's awesome.Published 9 months ago by Celso
It was ma bear to install on my saw, didn't thing it was going to work. WRONG, after tweaking it it work great.Published 9 months ago by Michael
Great product. Took a little work to mount and align to my Delta 34-670. Works great.Published 12 months ago by Sam Tanaka
1. Note in the box said it was opened for quality control and was taped (poorly) which is probably why the box and styrofoam packing was all but destroyed during shipping.
2. Read more
I have had my Sears craftsman tablesaw for 30 years and unfortunately I have lived with the miserable fence that long also,so I ordered the delta 36-t30 fence and was excited to... Read morePublished 12 months ago by Smb
CT Power Tools is selling the T2 but shipping the T3. The fence seems to be of similar quality but the sudden price inflation followed by the bait and switch is a little... Read morePublished 13 months ago by William Morton