- Not Sure Which Drill to Buy? Our cordless drill buying guide explains the differences between screwdrivers and impact drivers, and can help you figure out which drill is right for you. Learn more
| Part Number : | DCD950B |
| Power Source: | battery-powered |
| Voltage: | 18 volts |
| Item Package Quantity: | 1 |
| Batteries Required?: | Yes |
| Battery Cell Type: | NiCAD |
| Item Dimensions | |
| Weight: | 1.2 Pounds |
| Length: | 10.13 inches |
| Width: | 11.13 inches |
| Height: | 4.13 inches |
|
This hammerdrill / drill/driver has three speeds for all kinds of fastening and drilling applications. View larger. |
Its stand-out feature is its patented triple speed range (0-500, 0-1,250, 0-2,000 rpm) and a corresponding triple speed range for hammer drilling (0 - 8,500, 0 - 21,250, and 0 - 34,000 bpm) which makes it easy to match the correct speed to the job.
Efficient, Powerful Motor for Robust Operation
The DCD950B owes its robust performance to a high-power, high-efficiency motor that delivers 450 unit watts out of maximum power for superior performance in all drilling and fastening applications.
Lightweight, Compact Design for Tight Spaces
Weighing in at just 3.9 pounds (without battery), the DCD950B lets you work all day without putting excessive strain on wrists and hands. Its compact size also makes it easy for you to drill in tight spaces like under sinks, and in corners or a closet.
Powered by Convenient, Long-Lasting XPR Batteries
The DCD950B uses any DeWalt 18-volt batteries - ideally XRP, which power the entire DEWALT line of 18-volt tools allowing users to run multiple tools off of the same battery packs.
Warranty Information
The DEWALT DCD950B 1/2-Inch 18-Volt XRP Hammerdrill / Drill/Driver is backed by a limited three-year warranty, 90-day money-back guarantee, and one-year free service contract.
What's in the Box
1/2-inch Hammerdrill/Drill/Driver, 360-degree side handle, and manual.
Product Details
Would you like to update product info or give feedback on images?
|
|
Share your thoughts with other customers:
|
||||||||||||||||||||||
|
Most Helpful Customer Reviews
19 of 20 people found the following review helpful:
5.0 out of 5 stars
De Walt is back were it should be,
This review is from: DEWALT Bare-Tool DCD950B 1/2-Inch 18-Volt XRPHammerdrill/Drill/Driver (Tools & Home Improvement)
I had an XRP that I used for 10 years and it was a great drill and it still runs but the case cracked on it and the drill tries to split in two when I use it. So i decided to order this one and I know De Walt has had some quality issues in the past but they have been fixed with this model. I have actually broke paddle bits with this drill. and the all metal chuck and shaft is great for long term usage.
18 of 20 people found the following review helpful:
3.0 out of 5 stars
Problem with motor not running,
By
Amazon Verified Purchase(What's this?)
This review is from: DEWALT Bare-Tool DCD950B 1/2-Inch 18-Volt XRPHammerdrill/Drill/Driver (Tools & Home Improvement)
I own a different model DEWALT cordless drill which I use regularly and really like. The DEWALT drills are built for rugged use. I purchased the DEWALT DCD950B 1/2-inch XRPHammerdrill/Drill/Driver as a backup drill and one for drilling into concrete or brick. I read reviews before purchasing where folks who purchased this same model had difficulty with the drill operating regularly. Upon arrival of my drill, I quickly pulled the trigger a few times and all seemed well. It mostly sat for a couple of months until yesterday when I needed two drills for a floor project where I didn't want to have to keep changing bits. Well, my newer hammerdrill worked sometimes and sometimes not. When it failed, the work light would go dim and the motor would not operate. If I turned the mode selectors and kept pulling the trigger, I could usually get it to start operating again until the next failure. This was quite aggravating. The good part was when I called Amazon.com and explained the problem, they immediately shipped me a replacement and expedited the shipping so that it will arrive in one day (tomorrow)! You can't beat that for good service. I can only hope that the replacement drill doesn't have the same problem. Thanks Amazon.com!
11 of 11 people found the following review helpful:
4.0 out of 5 stars
Dewalt Hammer Drill,
By
Amazon Verified Purchase(What's this?)
This review is from: DEWALT Bare-Tool DCD950B 1/2-Inch 18-Volt XRPHammerdrill/Drill/Driver (Tools & Home Improvement)
I purchased the 950 as a second 18V Dewalt cordless to support my work in homebuilding/remodeling and furniture making. I already have another 18V Dewalt and this gave me the added hammer drive feature plus a second drill/driver. I have had the older one for some 6 years. It is a work horse although a bit heavy when you use it for extended periods especially overhead. The new 950 is a work horse as well and is made a bit sturdier with the metal drive train. It too is heavy. Neither drill/driver disappoints in terms of power. I have 4 batteries and only the non XRP batteries wane in heavy use. By the way I just learned that I can use the new Lithium batteries with either drill driver. I think this is a great design consideration on the part of Dewalt! Certainly this will lighten the unit in use. I will have to wait and see regarding balance when I purchase the Li ION batteries.
The 950 has one LED to light the way and it is a handy feature but I do notice that in some areas the shadow the head casts makes the light somewhat less effective. I had an unpleasant experience with the first 950 I ordered. I was using it to install a storm door, i.e. light duty.I had freshly charged batteries and within just a few screw installs it would not operate upon trigger actuation. The LED would light but the drill motor did not turn in the low speed setting. I found that switching to the second or third speed setting would allow normal operation, even if I switched back to the lowest speed. Needless to say I sent it back. A new one arrived very quickly and seems to be OK although I did experience the same event once more (one time). So why did I rate this as a 4 star you say? Primarily because it is a workhorse and I expect it to hold up as my other unit does. I find the hammer drill feature to be the answer to driving deck lags and drilling into concrete for TapCons. I also like the fact that I can swap in/out Li ION batteries and finally the price was right.
Share your thoughts with other customers: Create your own review
|
|
Tags Customers Associate with This Product(What's this?)Click on a tag to find related items, discussions, and people.
|
|
This product's forum
Active discussions in related forums
Search Customer Discussions
|
Related forums
|