DEWALT DW746X Woodworker 10-Inch Left Tilt Intermediate Saw with 30-Inch Fence, 115-Volt 1-Phase

by DEWALT

Product Description

Amazon.com Product Description

The DeWalt DW746X woodworker 10-inch left-tilt intermediate saw with 30-inch fence is a precision rip fence that delivers smooth action and always travels parallel to the blade, making precise adjustments quick and easy. A massive cast-iron trunnion provides solid arbor support delivering smooth, accurate cutting performance. A blade elevation crank with plenty of hand clearance makes blade height adjustments on the table saw quick and easy. Accurate blade-angle adjustments are also easy thanks to the large, adjustable bevel scale and the graduated bevel crank (each revolution equals a 2-degree adjustment). The large, easy-access on/off switch eliminates fumbling around when you're ready to start or stop cutting operations. Powerful and space efficient, the 1-3/4 HP TEFC induction motor provides the power you need to cut the toughest hardwoods. And unlike other woodworker's table saws in the category, the motor is located in-board and out of your way, making it easy to store against the wall when not in use. For easy dust collection, this DEWALT table saw is equipped with a dust collection port making it easy to connect your saw to a vacuum or dust-collection system. Other vital specs include a 115-Volt, 1 Phase motor, a 5/8-inch arbor, a no-load speed of 3,000 RPM, and a tool weight of 254 pounds. This rip fence comes with a 10-inch 30-tooth blade, a miter gauge, and 30-inch rails.

From the Manufacturer

DEWALT DW746X Woodworker 10-Inch Left Tilt Intermediate Saw with 30-Inch Fence, 115-Volt 1 Phase

Product Details

• Item Weight: 274 pounds
• Shipping Weight: 307.5 pounds
• Shipping: This item can only be shipped to the 48 contiguous states. We regret it cannot be shipped to APO/FPO, Hawaii, Alaska, or Puerto Rico.
• Shipping Advisory: This item must be shipped separately from other items in your order. Additional shipping charges will not apply.
• ASIN: B0000302Q7
• California residents: Click here for Proposition 65 warning.
• Item model number: DW746X
• Average Customer Review: 4.3 out of 5 stars  See all reviews (19 customer reviews)
• Amazon Best Sellers Rank: #222,197 in Home Improvement (See Top 100 in Home Improvement)
  • #94 in Home Improvement > Power & Hand Tools > Power Tools > Saws > Table Saws

Customer Reviews

Most Helpful Customer Reviews

85 of 85 people found the following review helpful:

5.0 out of 5 stars I studied a long time before buying this saw..., February 26, 2005

By 

Scott Pointon "Former Marine, Librarian, Wood... (Crest Hill, IL United States) - See all my reviews
(VINE VOICE)    (REAL NAME)   

This review is from: DEWALT DW746X Woodworker 10-Inch Left Tilt Intermediate Saw with 30-Inch Fence, 115-Volt 1-Phase (Tools & Home Improvement)

My woodworking hobby outgrew my starter saw a few years ago, but circumstances did not allow me to buy a new saw until this year. Since I really wanted to take my time with this decision, I studied the market, put my hands on every saw I could, and read everything I could find on the web about table saw features. Since I work in a library, I also had access to every table saw review in most of the woodworking magazines.

Eventually I came up with the following criteria:

- I have a one car garage for a workshop, so space was a big issue. I was only looking at saws with 30" capacity to the right of the blade. I also limited my search to saws that could be pushed flat against a wall if need be. This left only hybrids and cabinet saws to consider.

- I wanted the most powerful motor I could get without having to switch to 240 volts, yet have the option to rewire the saw for 240v later if I so choose (thus eliminating 3hp saws).

- I wanted a solid fence that was accurate and DID NOT DEFLECT when locked down.

- I wanted some decent dust collection abilities.

- I wanted a quieter saw with less vibration than my old Delta contractor's saw.

- I wanted to spend less than $1000 to get the saw, yet have lots of options for upgrading/outfitting later.

Eventually I chose the DeWalt 746, and here are my observations:

The saw package arrived in relatively undamaged crating (seven days after I ordered it from Amazon), and the saw was in perfect condition. Here's a tip - I ordered this saw over the phone and was given the option to pay $25 to have the saw delivered on the ground in my shop - well worth it! Assembly was not too bad (3 hrs), but the manual could have been a bit better. In my mind it was a bit too small and the illustrations corresponding to each step of assembly were not always on the same page! This saw is heavy and the cabinet/stand is very stiff and strong. I feel that the base of this saw is a much better design than the open stand of my old Delta. The saw also runs very smoothly - it is A LOT quieter than my last saw and vibration is at a minimum. The motor is about as powerful as you can get while running 120v without popping breakers left and right (which I have read is a common problem with the 2hp motors running 120v). I have not had any problems ripping 8/4 white oak with a good sharp blade... Speaking of blades, the one that came with this saw is inferior. I will keep it just for those instances where I want to cut treated lumber for outside projects or some other such task not requiring precision or smooth cuts. I have always wanted a Biesenmeyer fence, but I read good things about the fence on this saw and was eager to try it for myself. I am pleased to say that it is a very sturdy (and heavy) fence with some ingenious features. Most importantly this fence operates very smoothly, it does not deflect when locked down, it was easy to adjust square to the miter slot and blade, and zeroing the fence scale could not have been easier. I did have to fuss with it a bit to get the fence face set 90 degree to the table, but once I got it there it seems to hold the setting well. Dust collection on this saw is absolutely excellent. I hooked up my Fein Turbo II vacuum and basically no significant sawdust escapes. I couldn't be happier in that department. As for safety features, I like splitters and hate blade guards so I was pleased to find that the splitter/blade guard on this saw is able to be separated (I did just that). The splitter is easily adjustable and works well.

As far as downsides go... Well, as I mentioned earlier the assembly manual could have been way better and the blade that came with the saw is junk. Also (and I read this several places ahead of time) the table is not absolutely flat. Using a straightedge I found a couple of hollows in the surface. I don't think they are significant enough to throw off the accuracy of what I am doing with this saw, but be forwarned that if you use a tablesaw to cut something more intricate than tenons you may have a problem with this. Unlike other reviewers I didn't have too much of a problem with the steel extension wings that came with this saw. When installed properly are they perfectly level to the main table? Yes. Are they perfectly flat? No, but acceptible for what they are. I wanted a good saw that could be upgraded and these are good enough for temporary use. In fact there are a host of great accessories/upgrades available for this saw. I already ordered a cast iron router table wing (made by Bench Dog) and soon I plan to order the DeWalt cast iron wing for the other side of the saw.

When it comes down to it, I am very pleased with this saw. The features all met or exceeded my personal needs. This is important, because I have no doubt I could have gotten a saw that performed nearly as well for a lot less money, but it would have failed to meet one or more of MY criteria. As for the price - I bought mine at a time when the saw was on sale and the mobile base was included (see my separate review of the mobile base). The sale price coupled with Amazon's ongoing deal of 25 dollars off any order over 199 gave me this saw at more than a seventy dollar discount. If your needs are similar to mine, then take a close look at this saw. I highly recommend it!

44 of 45 people found the following review helpful:

4.0 out of 5 stars IT'S NOT A UNISAW...., May 29, 2005

By 

KRASSEL (SPANAWAY, WA USA) - See all my reviews

This review is from: DEWALT DW746X Woodworker 10-Inch Left Tilt Intermediate Saw with 30-Inch Fence, 115-Volt 1-Phase (Tools & Home Improvement)

But I don't think it was suppose to be. It's billed as a "hybrid" and I think as such it does a pretty good job. I've had mine for a couple of years now and yep...had to do some improvements to it. First the miter gauge...its junk..toss it and get an Osborne EB-3, build a good panel sled and you've got that problem solved. Toss the throat plate and get a Tru-Cut, its easier to get level and the replacable inserts are the cats meow. The blade guard, splitter and dogs are adequate, haven't seen anything on the market that would work better, so I have just learned to live with it. The dust collection part was actually the easiest to fix, I removed the lower blade "cover" that the 2" dust hose was connected to, enclosed the back of the saw with a scrap piece of veneer, then enclosed the bottom of the saw with a piece of 1/4 in ply with a 4" connector epoxied to it. Once or twice a year I open the plastic side and with the chip collector running I blow out the saw to get the little that doesn't go on its own, this is when I also do the little bit of maintenance that is nec... lube, oil, etc.
The fence....yeah well the fence...I've actually had very good luck with my fence. Its pretty solid and the face doesn't have the cup or deflection that several reviewers have reported. Once I got it "zeroed" its stayed pretty much where it belongs. But adding accesories to it is a pain. Feather boards, stop blocks, etc., have to be custom built and arn't exactly works of art. This is where a Biesmeyer really shines, as it is simple to add attachments to the Biesmeyer. I do 90% of my cutting with the miter gauge or a sled, so I don't really feel the need to upgrade the fence.
99% of the cutting I do is Hardwoods. Especially exotics, vera, quebracho, mesquite, and a lot of burl maple. I've never had the saw bog down or had the breaker kick out. I only use Freud thin kerf blades and keep em sharp. I also use Dri Cote on my blades and cutters and feel this really makes a differance.
My woodworking buddy has the Jet Supersaw (see review). Its a good saw, but he's had to make "improvements" also. We both still enjoy using our saws and of course we both think we got the best one.
If you buy the Dewalt or the Jet, expecting a UniSaw, you will be disappointed. But I do think its better than a contractors saw, I had a Sears and a Delta contractors saw and I like this one a lot better. More stable, more surface area on the table (I did add the cast iron wings to both sides)and the noise level is less than either of my contractors saws.
I added the Dewalt mobile base (separate review)...in a small shop its a must...the after markets don't make it, go with the Dewalt base.
I would recommend the Dewalt 746 or the Jet Supersaw to anyone looking for a "cabinet" saw with a smaller profile and a smaller price than the Unisaw.
UPDATE...I've had this saw over three years now and decided it was time to upgrade the fence. Found that there are only a couple of after market's that will fit on it and Bismeyer ain't one of em. I replaced the aluminum face with apple ply on both sides of the fence body with a strip running down the top. It looks just like a Bismeyer now, (everyone else stole the design, why not me?)and functions just like one. Attaching jigs and featherboards is a snap,and the fence is a lot more rigid. An added bonus is being able to cut on both sides of the fence now. I'm glad I took the time to make it. Great addition to a great saw. If you would like more info on adapting your fence send me an email and I will send you some pic's and a better description on constructing it. My email is on my about me page.
Here is another tip..I removed the blade guard from the splitter, laid the splitter on a hard flat surface and pounded the mounting "fingers" flat. Now it only takes a couple of turns of the two nuts to install or remove the splitter and kickback pawls. I use a small air ratchet and a 10mm socket to zap the nuts on and off. Really speeds up the process and the splitter is just as secure as before. The blade guard has been relegated to a dark corner in one of the storage bins.

23 of 23 people found the following review helpful:

4.0 out of 5 stars My first piece of equipment for my small shop., June 28, 2005

By 

Brian Wallace (Annandale, VA) - See all my reviews
(REAL NAME)   

This review is from: DEWALT DW746X Woodworker 10-Inch Left Tilt Intermediate Saw with 30-Inch Fence, 115-Volt 1-Phase (Tools & Home Improvement)

I consider myself a weekend warrior just getting into woodworking, so my review will be written from that perspective.

After purchasing a new house I had a new 18x12 foot shop to fill with new toys. A new table saw was at the top of my list. Like everybody else, I studied, went to local stores and spoke to salesmen, went to trade shows, and read just about every review on the internet about table saws I could before I decided which one to buy. Once I decided on my budget, there are not that many different manufactures to chose from. I know there are many out there who would disagree, but I mean there are only 3-4 MAJOR manufactures to choose from. All of them offer one model with a few different options in the $900-$1000 price range. I chose the Dewalt because I have numerous other power tools made by them and they have served me well over the years. I believe the Dewalt nosed out the other saws also because Amazon was offering a free mobile base with the saw.

I gave the saw 4 out of 5 stars because of a few minor problems I feel should be addressed before it deserves a perfect rating. I will list all the things I liked about the saw and all the small problems I had with the saw.

The Good:
1) The saw was basically ready to go right out of the box. I did spend about 3-4 hours putting the saw together, but all factory settings were right on. (I did purchase a set up kit to check table flatness, arbor runout, and a few other things and everything was well within tolerences.)

2) The saw has run FLAWLESSLY for about a year now. No major adjustments have had to be made.

The Bad
1) The instructions were horrible. A $950 dollar saw and the instructions look like they were a copy of a copy quickly made and taped to the saw. Many of the pictures were in places on the page not next to the section I was following. They were also only a small booklet.

2) The miter gage is not very precise. But to be fair, all models I looked at the miter gages seemed pretty cheap. I believe all manufactures expect them to be replaced rather quickly if you plan on doing any precise cutting.

3) The stock extension wings are pressed steel. I have not had any problems with them, but I think they make the saw look cheap. I hope Dewalt could make the optional cast-iron extension wings standard.

I am very happy with my purchase and I believe I made the right decision for me. I have had the saw for about a year now and it continues to do anything I ask of it. I would gladly purchase the saw again and recomend the saw to any woodworker looking for a great table saw.