DEWALT DW988K-2 18 Volt XRP 1/2-Inch Drill/Driver/Hammerdrill Kit

by DEWALT

Product Description

Amazon.com Review

Delivering solid performance and serious convenience, DeWalt's heavy-duty, 18-volt, 1/2-inch drill/driver/hammer drill will do up to 2,000 rpm and 34,000 beats per minute, and can produce 450 inch-pounds of maximum sustained torque. The carbide-tipped chuck jaws have excellent bit grip. There's also an automatic spindle lock, as well as an antislip comfort grip. We were especially impressed with the balance of this hammer drill--its T-handle design distributes weight evenly so it's easy to hold, even over long periods of time, and the grips seem to work for people of all different hand sizes. --Jonathon Tudor

From the Manufacturer

DEWALT DW988K-2 18 Volt XRP 1/2-Inch Drill/Driver/Hammerdrill Kit

See all Product Description

Product Details

• Product Dimensions: 16 x 14.2 x 5.2 inches ; 13.8 pounds
• Shipping Weight: 13.8 pounds
• Shipping: This item is also available for shipping to select countries outside the U.S.
• Shipping Advisory: This item must be shipped separately from other items in your order. Additional shipping charges will not apply.
• ASIN: B00005O6B2
• California residents: Click here for Proposition 65 warning.
• Item model number: DW988K-2
• Average Customer Review: 3.7 out of 5 stars  See all reviews (23 customer reviews)
• Amazon Best Sellers Rank: #326,150 in Home Improvement (See Top 100 in Home Improvement)
• Discontinued by manufacturer: Yes

Customer Reviews

Most Helpful Customer Reviews

12 of 12 people found the following review helpful:

4.0 out of 5 stars DW988K, July 24, 2002

By A Customer

This review is from: DEWALT DW988K-2 18 Volt XRP 1/2-Inch Drill/Driver/Hammerdrill Kit (Tools & Home Improvement)

After reading about the clutch and gearbox problems some owners where having with the early production models, I was worried I might have to switch brands again and have an oddball 18V system that wouldn't be interchangeable with my other DeWalt 18V tools.
I needed a replacement for my worn out DW997K 18V hammer drill that I used every day on the job for two years, with the only repairs being an occasional motor brush change.
I decided to bite the bullet and purchased the DW988K. The first thing I did was check the clutch operation in all three gear ranges, and was glad to find that it was working correctly.
I am now looking forward to another abusive relationship with this DeWalt cordless.
Overall, it feels more solid and works as good or better than the old DW997 it replaced, although the clutch adjustment collar seems a little more fragile compared to the old model. Time will definitely tell. I don't care for the location of the spare bit storage. I liked it better when it was tucked up out of the way on the upper motor housing of the old model where it was less likely to interfere with or snag on things, but since I don't use it for extra bit storage that often, I can live with it.
I also wasn't sure that the DW988's "Max" 3rd gear was necessary, but after using it for a while, I can say that it does help get the job done faster when drilling small 3/16" or 1/4" holes in hollow masonry block. I occasionally will push it to a 5/8" hole in hollow block using Medium [2nd] range.
The DeWalt website lists the maximum size hole saw in wood as 2", but I routinely use it in the hammer mode with a 3-5/8" or 3-3/4" hole saw in 2X or 3/4" PT plywood and engineered lumber to cut in old-work fixture boxes and ceiling fan support boxes and on smaller jobs to make holes in joists to pull cable bundles or run conduits. I have also used it in low range with a 4-5/8" hole saw and 18" extension to make holes through double 2X for bath vent fan and dryer ducting. Large holes like this required one fully charged battery for every third 4-5/8" hole through 2X material, but the job went quickly in tight quarters without having to drag out my large DW124 right-angle drill and extension cord. It has also been used on occasion for rewiring jobs with a 9/16" and 3/4" X 54" long Diversibit to drill down inside a buildings wall cavities and into a crawl space below.
The DeWalt's all metal 1/2" ratcheting keyless chuck is manufactured by ROHM, the same company that manufactures chucks for Bosch and others, has been around for a few years and has proven itself to be extremely durable and damage resistant even when making contact with other metal objects while drilling. The spindle lock is also an excellent feature and once you've had it, you'll never want to own or even use a keyless chuck equipped drill without it ever again.

Overall, I would recommend the DW988. DeWalt seems to have the bugs worked out of it and it has performed well for me in every drilling task asked of it, even if it exceeded the tools design rating.

18 of 21 people found the following review helpful:

2.0 out of 5 stars The clutch is DEFECTIVE ***, March 28, 2002

By 

hethfeth (CA United States) - See all my reviews

This review is from: DEWALT DW988K-2 18 Volt XRP 1/2-Inch Drill/Driver/Hammerdrill Kit (Tools & Home Improvement)

After one return for a new drill and then trying several Drills at the Depot, and two calls to Dewalt, I finally got the answer to why the clutch DOES NOT WORK in low gear - the drill is DEFECTIVE. The Dewalt tech put it this way: "We designed it to work in all speeds, but that's just the way it came out." In other words, the production model is defective. I have an old 2-speed 18V drill, and the clutch works as it should in the 0-450 rpm range. The XRP clutch does not work in the 0-450 range. Since low speed has the highest torque, this is where you most need a clutch!! Wait for Dewalt to fix this! They know it is defective, but are trying to tell everyone it is normal. Bad show.

8 of 9 people found the following review helpful:

5.0 out of 5 stars Great Drill, January 25, 2003

By A Customer

This review is from: DEWALT DW988K-2 18 Volt XRP 1/2-Inch Drill/Driver/Hammerdrill Kit (Tools & Home Improvement)

I have had this drill for 1 year and have had absolutely no problems. I believe it is the best drill on the market, which is why I bought it. As far as some of the other reviews are concerned I know plenty of people who have this exact drill or the non hammerdrill model and none have had problems. As far as it compared to the Milwakee 18v: Dewalt has more power 450in/lbs to 400in/lbs, 3 speed instead of 2 speed, and a one handed chuck which has never ever slipped compared to a two handed chuck. I have dropped this drill to concrete a number of times, once from a second story straight on the drill bit/shaft. The drill bit was completely bent and the concrete had a big mark but the drill shaft is perfectly straight. I also ran my drill over with an F350 and it still runs like new. Anyways, it is a great drill with more power than alot of corded 1/2 inch drills. I recommend it to anyone.