Customer Reviews

Delta 50-820 500 CFM Portable Dust Collector

5 star:		(1)
4 star:		(1)
3 star:		(0)
2 star:		(0)
1 star:		(0)

 

 

My shop consist of a one car garage and I do alot of Bandsaw projects. The amount of sawdust produced by a Bandsaw is enormous and with very little air circulation this poses a health hazard. This dust collector takes care of this problem. Its ease of mobility to go from one machine to another has keeped sawdust to a minimum with very little to clean up at the end of a day, also making it easy to store. This unit does get warm but not hot and has not tripped any breakers during long operating periods. It is rated at 80db but because of the size of my shop is seem alittle louder than that. I had this unit running in about five minutes out of the box and have been pleased with its perfomance.

I recieved this collector as a gift. Probably would not have bought it on my own, mainly because I thought I needed more hp. I was wrong. Have had this little jewel in the shop now for about 7 months and its perfect. I have a very small shop, 120 sq ft, and this unit fits under my home made saw table (New Yankee Workshop version). I generally only have one machine running at a time so I just move the hose around. Very seldom have to move the machine. It does a great job of collecting the dust and chips from the table saw, planer, miter saw and band saw. The only problem I have had is with the zipper on the bag, I think it could have been a little heavier construction, but if you remember to vacuum the zipper edges before you attempt to close it up again it works fine. I added an additional length of 4" hose (10ft) to the hose that came with the machine so I could easily reach all my chip producers as I did not want to constuct a permanent pipe system and have not had any problems with static electricity. I'm thinking of adding one of the "can" type second stages to my little system so I am not emptying the bag so often. This is a perfect upgrade from a shop vac type of system.