Customer Reviews

DeoxIT® FaderLube F5 Spray (NSN-6850-01-477-1528) 5% solutio

5 star:		(4)
4 star:		(1)
3 star:		(0)
2 star:		(0)
1 star:		(1)

 

 

I had scratchy (really scratchy) volume potentiometers on an old receiver, and I've been trying to clean them with rubbing alcohol, which I now know can damage volume pots because it strips them of any lubrication. After using this, things are much improved, although I'll still eventually have to replace the pots, they're just too far gone in the upper half. I wish it had a way to keep the straw with the can when not in use: any spray product that comes with a straw should have a way to keep the can and straw together (especially when it costs this much). I've learned a lot about the longevity of rubber bands over the years.

My volume knobs on my guitars emitted a scratchy electrical sound when I turned them. I used Deoxit and that problem is solved completely.

I have an electric guitar from the 80s where the volume and tone pots had became so bad over time that it was essentially unusable. At most settings there was no sound or a loud scratching noise and you had to fiddle with the knob to get any sound to come out at all. I heard about this product and thought I would give it a try. I applied it according to the directions (only a couple of tiny squirts was necessary in each pot) and the pots started working just like new. Not only did the pots work as they should, but the guitar's sound improved quite dramatically as well. I am totally sold on this product.

Good for scratchy pots ... a disaster for faders. Totalled out the faders on my vintage Arp Odyssey and Tapco 4400. The faders no longer move. Both pieces were never toured and kept covered. The ARP was bought new. Dielectric grease by Luberex is the choice if you have to get into your vintage faders.

good for cleaning faders...the lube isnt that great if you wanna buy a lube get the f100 but if you wanna clean then get this its the f5...i had to spray a lot of times to get the fader as loose as i wanted it to be on my ooollllddd ttm56 rane mixer....so i ordered the f100 so i dont have to spray my faders as much but the f5 is great for cleaning rane faders

I used DeoxIT on my Rane TTM57SL mixer. Some of the effects buttons and knobs were not as responsive anymore. I was skeptical when I first ordered it, but after applying it on the mixer buttons, they instantly started to work again with every press. My mixer is like new again!