Customer Reviews

Dish Network DPP Separator

5 star:		(3)
4 star:		(1)
3 star:		(0)
2 star:		(0)
1 star:		(0)

 

 

I spent a couple of hours trying to get this two work properly using a single coax from a DPP LNB direct to the separator and the outputs connected to my VIP222K reciever. It simply did not work properly for TV2 until i installed a DPP33 multiswitch between the LNB and the separator. it therefore does not work as stated in the description (on Amazon at least).

it works fine with my tunner..
I have a dual tunner, and I was able to run a single wire to get it working.

One cable to a HD PVR with the use of this separator, as one cable will provide all the transponders/channels to both tunners of the dual tuner PVR. Works as described and easy to install. If you are using a power inserter for Port #1, ensure that the sepator is connected closet to the PVR, then the power inserter with the cable to Port #1 on the DPP 44 switch. This separtor requires that you have either a DP LNB and a DPP switch, a DPP LNB or a DPP LNB and a DPP switch.

Cobra

Received the above item in great conditions, I am very happy and I thank you very much the above company that sent the above tool
that I could repair what I needed to do as soon as possible. Thanks again.