- Pipe tap cuts threads in pipes and pipe fittings
- Straight flutes to cut threads in through holes and blind holes
- NPT (National Pipe Taper) threads for tighter seals than straight threads
- High-speed steel is compatible with a variety of materials
- Modified bottoming chamfer has additional length to reduce chip load, add tool life, and permit higher tapping speeds
0 items added
To add items, choose from the table below
Dormer E710 High-Speed Steel Pipe Tap, NPT, Uncoated (Bright) Finish, Round Shank With Square End, Modified Bottoming Chamfer
|Price:||$19.07 - $209.95|
|Material Type||High Speed Steel|
|Finish Types||Uncoated (Bright)|
|Manufacturer Series Number||E710|
|Shank Type||Round With Square End|
The Dormer E710 uncoated, high-speed steel pipe tap has straight flutes and a round shank with... See more product details
Customers Who Viewed This Item Also Viewed
The Dormer E710 uncoated, high-speed steel pipe tap has straight flutes and a round shank with a square end, and is used to create NPT (National Pipe Taper) right-hand threads in a range of materials. NPT is an ANSI-standard thread configuration intended for use with a sealant to create a leak-free tapered pipe joint. The straight flutes of this tap are suitable for threading through holes (extending through the workpiece) and blind or bottoming holes (with only one opening). The modified bottoming chamfer has additional length to reduce chip load, add tool life in difficult-to-machine materials, and permit higher tapping speeds.
Right-hand threads are designed to tighten when a head or nut is rotated clockwise (the most common threading direction). High-speed steel (HSS) is a common general-purpose steel for cutting tools and is compatible with a variety of materials. With no coating or surface treatment, this uncoated tool can be used on a broad range of materials and provides an economical alternative to coated tools. The round shank with square end helps to minimize rotation in the tool holder. This tool can be used in machines, such as drill presses or lathes, or with hand tools such as tap wrenches.
In the Dormer E710 series, taps with nominal diameters of 1/16” to 1/2” have four flutes, taps with nominal diameters of 3/4” to 1-1/4“ have five flutes, and taps with nominal diameters of 1-1/2” and 2” have seven flutes. In this series all taps have modified bottoming chamfers. This tool conforms to ANSI B94.9 standards and can create threads to a depth one-and-a-half times its diameter. It is suitable for normal pipe thread tolerance.
Taps produce internal threads in previously formed holes and can be used in machines (such as drill presses) or with hand tools. Common types of taps include hand taps, spiral point taps, spiral flute taps, thread forming taps, and pipe taps. Hand taps (straight-flute taps) collect chips in the straight flutes of the tool; spiral point taps push chips through holes ahead of the tool; and spiral flute taps pull chips back from the tip of the tool, up and out the hole. Thread forming taps, also known as cold forming taps, press rather than cut to create threads in a drilled hole, and no chips are created. Pipe taps create threads in pipes and pipe fittings. Each thread type designates a thread profile and each type is identified with an abbreviation. In the U.S. and Canada, the Unified Thread Standard is the dominant thread type, including UNC (Unified Coarse), UNF (Unified Fine), and NPT (National Pipe Taper) threads, among others.
Precision Dormer manufactures cutting tools under the following brands: Precision Twist, Dormer, and Union Butterfield. The company has locations around the world, and provides tools adhering to ANSI, NAS, and DIN standards.